You may also like
Callan Artino Grade 3 Entrance Leverset
Keyed Entry (Single Cylinder) Function: Keyed entry (single cylinder) door lever sets are keyed on the exterior with an associated thumb turn on the inside that can quickly and easily lock or unlock the latch mechanism. Single cylinder units are commonly used on a front, side or back entrance but can also be found on interior doors as well, depending on application.
Features:
- All Metal Construction
- Reversible Handing (Left or Right)
- SC1 Solid Brass 5 Pin Cylinder
- Cylinder can be Removed for Easy Re-keying
- Includes Round Corner Latch
- Combination Screws for Wood or Metal Door Mounting
- Concealed Screws
Specifications:
- Backset: 2-3/4", 2-3/8"
- Cross Bore: 2-1/8"
- Edge Bore: 1"
- Handle Style: Lever
- Latch Face: Round Corner
- Strikes: Full Lip Round Corner
- Door Thickness: Adjustable from 1-3/8" to 1-3/4"
- Lever Length: 4-1/8"
- Projection: 2-5/16"
Manufacturer Resources
Product Specs
- Subcategory:
- Leversets
- Series:
- Artino
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Commercial/Residential:
- Residential
- Lock Function:
- Entrance
- Product Type:
- Leversets
- Grade:
- Grade 3
- Product Attribute:
- Cylindrical Locks
- Product Function:
- Entrance
- Product Category:
- Mechanical Locks
- Department:
- Door Hardware
Callan 360201 – Frequently Asked Questions
1) Will the Callan Artino entrance leverset fit a standard 2-1/8 inch bored door prep?
Yes. The Artino entrance leverset drops into the standard residential prep: 2-1/8 inch cross bore, 1 inch edge bore, and a latch that adjusts for either a 2-3/8 or 2-3/4 inch backset. Door thickness is adjustable from 1-3/8 to 1-3/4 inches, so it covers both a standard 1-3/4 inch exterior door and an older 1-3/8 inch one.
2) Do I have to order the Callan Artino lever handed for a left or right hand door?
No. The Artino leverset is field reversible, so one unit covers both left and right hand doors. You set the handing during install rather than at order time.
3) Can I key the Callan Artino leverset to my existing Kwikset or Schlage keys?
Both keyways are offered: SC1 5-pin (the Schlage residential keyway) or KW1 5-pin (the Kwikset residential keyway). Order the one that matches the rest of the building. You also choose keyed different or keyed alike, so a landlord can put one key across several units. The cylinder pulls out for re-keying later if the keyway is right but the bitting is not.
4) Is the Callan Artino entrance leverset rated for a commercial building or apartment corridor?
It is a Grade 3 residential lock, which puts it at single-family and light multi-family doors, not commercial traffic. For a leased corridor or a commercial entry you want Grade 2 or Grade 1: the Hager 2525 is a Grade 2 commercial cylindrical entry lever, and the Falcon B511CP6D is a Grade 2 entry/office cylindrical lever.
5) What is the closest equivalent to the Callan Artino Grade 3 entrance leverset from another brand?
The Master Lock BC Series RL01 is the nearest match. It is a Grade 3 keyed entry leverset with a return style lever, the same grade and entrance function as the Artino. The Cal-Royal AUS00 is also Grade 3 with an entrance/office function and fits doors 1-3/8 inch to 1-3/4 inch thick, matching the Artino's adjustable 1-3/8 inch to 1-3/4 inch door range.
6) I need a heavier duty keyed lever than the Callan Artino for a commercial entrance. What should I use?
The Artino is a Grade 3 entrance leverset listed for residential use. For commercial traffic, step up to the Hager 2525, a Grade 2 commercial cylindrical entry lock with lever handle covering doors 1-3/8 inch to 2 inch, or the Cal-Royal AG00 entrance lever, Grade 2 with a 6-pin Schlage C keyway keyed different and a 2-3/8 inch backset. The Falcon B511CP6D is another Grade 2 medium duty entry/office lever.
7) My door is 2 inches thick. Will the Callan Artino work, or do I need something else?
The Artino adjusts from 1-3/8 inch to 1-3/4 inch, so a 2 inch door is outside it. For that thickness, look at the Deltana 6201 Manchester, 6411 Morant or 6431 Linstead entry levers, all rated 1-3/8 inch to 2 inch, or the Hager 2525 Grade 2 entry lock, also 1-3/8 inch to 2 inch.
8) What does the keyed entry single cylinder function on the Artino lever actually do?
Key on the outside, thumbturn on the inside. You lock and unlock from indoors with a twist and from outdoors with the key, so it suits a front, side, or back entry door. If you want a non-locking lever for a hall or closet instead, look at a passage function such as the Kwikset 200BRNL Breton, also Grade 3.
9) Does the Callan Artino leverset come with a latch and strike, or do I buy those separately?
A round corner face latch is included, along with a full lip round corner strike and combination screws that work in either a wood or a hollow metal door. Mounting screws are concealed once the rose is on. If your existing frame has a square corner strike pocket, the round corner strike will not drop in without rework.
10) Which lever should I order for the interior doors if I am putting the Callan Artino on the entry?
The Artino is a keyed entry single cylinder function, so it is not the one for hall and closet doors. For non-keyed openings in the same residential range, the Kwikset 200BRNL Breton passage lever is Grade 3 for doors 1-3/8 inch to 1-3/4 inch, and the Kwikset 300BRNL Breton privacy lever is Grade 3 over the same thickness range for bed and bath. Bravura's Atlanta, Orlando and Tampa round or square trim passage leversets are Grade 2 options.
11) Is a keyed entry lever the same as a storeroom or classroom lever?
No. The Artino is an entrance function keyed on the outside with an inside thumb turn that locks or unlocks the latch. A storeroom lever such as the Cal-Royal AG05, Grade 2 with a deadlocking latchbolt, or the Hager 2580 Grade 2 storeroom with Withnell lever, keeps the outside lever locked at all times with no inside turn. A classroom lever like the Cal-Royal AG03 or the Dexter C1000 classroom is locked and unlocked by key from the outside only.
12) Is there a keyless option instead of the Callan Artino keyed entry lever?
Yes. The Artino uses an SC1 or KW1 5-pin cylinder keyed on the exterior. If you would rather not issue keys, the Delaney LP250 is a Grade 2 electronic keypad leverlock, the Emtek Classic keypad leverset is a code-entry lever, and the Lockey 2835 is a mechanical pushbutton keyless lever lock with ADA compliance for doors 1 3/16 inch to 2 inch.
13) What is the Grade 1 alternative if my spec calls for heavy duty keyed lever hardware?
The Artino is Grade 3. Grade 1 cylindrical lever options in the same bored lock family include the Dexter C1000 Series classroom and classroom security levers, both keyed and clutching for doors 1-3/8 inch to 1-3/4 inch, and the Corbin Russwin CL3300 Series. For Grade 1 non-keyed openings, the Falcon K101 covers 1-3/8 inch to 2-1/4 inch and is fire rated.
14) I want a keyed entry with a knob instead of a lever. What matches the Callan Artino function?
The Arrow HK11-BB is the knob counterpart for the same opening: a turn-pushbutton entrance cylindrical lock with a ball knob and conventional cylinder, covering doors 1-3/8 inch to 1-3/4 inch, the same thickness range the Artino adjusts across. The difference in operation is the inside turn-pushbutton versus the Artino's inside thumb turn.
15) Does the Callan Artino accept a Schlage keyway like the Cal-Royal entrance levers?
Yes. The Artino ships with an SC1 solid brass 5 pin cylinder that can be removed for re-keying, and a KW1 5-pin keyway is also available. The Cal-Royal AG00 entrance lever uses a 6-pin Schlage C keyway keyed different, so if you are keying into an existing 6-pin Schlage C system rather than a 5-pin SC1 system, that is the relevant difference to check with your locksmith.
16) How far does the Artino lever stick out from the door face, and how long is the lever?
Projection is 2-5/16 inches from the door face and the lever itself is 4-1/8 inches long. Worth checking against a door that swings against a return wall or next to a jamb-mounted item, since that projection plus a 4-1/8 inch lever is what determines your knuckle clearance.
17) What finishes does the Callan Artino entrance leverset come in?
Three: US15 satin nickel, US19 black, and US10BE edged bronze. All three are the same all-metal lock body, so a property manager can mix finishes across a building without changing the prep or the keying.
18) Can I use a dummy lever to match the Callan Artino on a closet or inactive door?
The Artino is a working keyed entrance leverset with a latch, so it is not a dummy. Dummy trim with no latch includes the BEST 7KC Series 1DT single dummy, Grade 2 medium duty, the BEST 9K Series 1DT, Grade 1 heavy duty, the Baldwin Estate 5103 half dummy in left or right hand, and Emtek Arts and Crafts dummy pairs. Note that Artino handing is reversible while the Baldwin 5103 half dummy is ordered handed.
How fast can I get the Callan 360201 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Callan 360201 come with a warranty?
Absolutely. The Callan 360201 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Callan 360201?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Callan 360201 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.