Command Access LPM1 Series Ele...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,010.73
Command Access LPM1 Series Electrified Mortise Lock with Latch Retraction - 24VDC Passage Function

Command Access LPM1 Series Electrified Mortise Lock with Latch Retraction - 24VDC Passage Function

(No reviews yet) Write a Review

Model: LPM110EU 06A 24V 626
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,010.73
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Command Access LPM1 Series Electrified Mortise Lock with Latch Retraction - 24VDC Passage Function

Professional Electrified Mortise Lock Solution

The Command Access LPM1 Series electrified mortise lock delivers Grade 1 performance with innovative latch retraction technology for push-pull applications. Operating at 24VDC with 260mA holding current, this passage function lock provides electronic latchbolt retraction while maintaining free ingress and egress through both levers. Built with patented PM300 technology and standard type 86 door prep compatibility, it retrofits seamlessly to Schlage L9000 compatible trim without special door preparation.

Professional Features & Benefits

  • Electronic Latch Retraction: 24VDC operation with 260mA holding current and 1.9A surge current for reliable electronic control of latchbolt retraction.
  • Grade 1 Heavy-Duty Construction: High-quality chassis engineered to withstand years of demanding commercial use and abuse.
  • Standard Door Preparation: Fits standard mortise pocket prepped for Schlage L series locks with no special door prep required.
  • Patented PM300 Technology: Advanced circuitry allows favorable wire runs and supports multiple locks on one power supply for system efficiency.
  • Fail-Secure Operation: EU functionality provides secure locking when power is removed, ideal for access control applications.
  • Flexible Installation Options: Available as complete locksets or chassis only for retrofitting to Schlage L series compatible trim.
  • Push-Pull Application Ready: Circuitry supports both momentary and continuously on operation for automatic operators and handicap access.
  • 3-Year Manufacturer Warranty: Comprehensive coverage provides confidence and protection for commercial installations.

Technical Specifications

  • Commercial/Residential: Commercial
  • Department: Door Hardware
  • Duty Level: Heavy-Duty
  • Electronic: Yes
  • Lock Type: Mortise
  • Product Attribute: Mortise Locks
  • Product Category: Mechanical Locks
  • Product Function: Passage/Hall/Closet
  • Product Group: Mechanical Locks
  • Product Subgroup: Mortise Locks and Trim
  • Product Type: Electrified Mortise Locks
  • Series: LPM18X Series
  • Subcategory: Mortise
  • Warranty: 3 Year Warranty

Professional Applications

  • Commercial Building Access Control Systems
  • Healthcare Facility Security
  • Educational Institution Safety Systems
  • Retail Loss Prevention
  • Industrial Facility Monitoring
  • Automatic Door Operator Integration
  • Handicap Accessible Entry Points

Why Choose Command Access Quality?

Command Access LPM1 Series mortise locks deliver professional-grade reliability with Grade 1 heavy-duty construction and patented PM300 technology. The 3-Year Warranty provides comprehensive coverage for demanding commercial applications. Engineered for push-pull conditions and automatic operators where dependable electronic latch control is essential.

Manufacturer Resources

Command Access Catalog

Product Specs

Product Group:
Mechanical Locks
Series:
LPM18X Series
Product Subgroup:
Mortise Locks and Trim
Product Type:
Electrified Mortise Locks
Subcategory:
Mortise
Commercial/Residential:
Commercial
Electronic:
Yes
Lock Type:
Mortise
Warranty:
3 Year Warranty
Duty Level:
Heavy-Duty
Product Attribute:
Mortise Locks
Product Function:
Passage/Hall/Closet
Product Category:
Mechanical Locks
Department:
Door Hardware

Command Access LPM110EU 06A 24V 626 – Frequently Asked Questions

1) Will the Command Access LPM1 electrified mortise lock fit a door already prepped for a Schlage L9000 mortise lock?
Yes. The LPM1 Series drops into a standard type 86 mortise pocket prepped for Schlage L series locks, so no special door prep is needed on a retrofit. It also works with Schlage L9000 compatible trim, which means existing levers and roses can often stay on the door. If you are only swapping the working parts, the LPM1 is offered as a chassis only for exactly that case, or as a complete lockset when the trim is being replaced too.
2) Does the Command Access LPM1 mortise lock lock or unlock when power is lost?
It locks. The EU version is fail-secure, so when power drops the latchbolt stays extended and the opening is secured. The levers still retract the latch mechanically from both sides, so egress is never dependent on power. If your life-safety plan calls for the door to free up on a power failure, a fail-secure lock is the wrong choice and you want a fail-safe device instead.
3) What voltage does the Command Access LPM1 electrified mortise lock run on, and how much current do I need to size the supply?
The LPM1 is built in both 12V and 24V versions, so pick the one that matches the power supply already on the job. On 24VDC it draws 260mA holding and pulls a 1.9A surge when the latch retracts. Size the supply for the surge, not the hold, and remember the surge is per lock if several fire at once. The patented PM300 circuitry is specifically built to allow longer, more forgiving wire runs and to let multiple locks share a single power supply.
4) Can the LPM1 mortise lock be wired to an automatic door operator for an accessible entrance?
That is the application it is built around. The circuitry accepts both a momentary signal and continuous-on operation, so it can either pulse the latch open on each actuator press or hold the latch retracted for a scheduled unlocked period. Wire the momentary output of the operator to fire the retraction just before the arm drives the door. Note that with passage function the levers are always free, so the latch retraction here is about clearing the strike for the operator, not about controlling who gets in.
5) I have Schlage L9050 mortise locks on the rest of my building. Can I add an electrified opening without changing the look?
You can. The Schlage L9050BDC is a Grade 1, heavy duty L Series mortise lock for 1-3/4 inch doors, and the Command Access LPM1 is built to retrofit into the same L series mortise pocket and to work with L9000 compatible trim. That lets you electrify one or two openings while keeping the lever and rose appearance consistent with the mechanical locks on every other door. Order the chassis only version if you are reusing the existing trim.
6) I need a storeroom function electrified mortise lock, not passage. What should I order instead of the LPM1?
The Command Access LPM1 is a passage function lock - both levers stay free for ingress and egress and the electronics retract the latchbolt. If the opening needs a storeroom function, where the outside lever stays locked and is released by key or credential, the DynaLock EML-1 Series is an electrified mortise lock built in storeroom function. Choose by how the door has to behave when nobody is pressing a button: passage for push-pull and automatic operator openings, storeroom for a door that must stay secure to the outside at all times.
7) What is the closest equivalent to the Command Access LPM1 electrified mortise lock for motorized latch retraction at 24VDC?
The SDC 7600 Series is the nearest peer. It is a Grade 1 motorized latch retraction mortise lockset with 24VDC control, and it is listed for 1-3/4 inch doors. The Command Access LPM1 is also a Grade 1 heavy-duty electrified mortise lock and runs latch retraction at 24VDC, drawing 260mA holding current with a 1.9A surge, using patented PM300 circuitry that supports multiple locks on one power supply. The main practical difference is the retraction method: the SDC 7600 uses a motor drive, while the LPM1 is built around the PM300 electronic retraction circuit and drops into a standard type 86 mortise pocket prepped for Schlage L series locks.
8) If the door does not need any electrification, what mortise lock takes the place of the Command Access LPM1?
A mechanical mortise lock in the same Schlage L series pocket. The Schlage L9050BDC is a Grade 1 heavy duty mortise lock in the L Series, entrance/office function, single cylinder non-deadbolt, supplied with a disposable SFIC, and listed for 1-3/4 inch doors. It uses the same standard mortise prep the Command Access LPM1 fits, since the LPM1 is built to drop into a pocket prepped for Schlage L series locks with no special door prep. The tradeoff is control: the L9050BDC is key operated only, so there is no electronic latch retraction and no tie-in to an access control system or automatic operator.
9) Is an electrified mortise lock with a solenoid controlled lever a substitute for a latch retraction lock on an automatic operator door?
No, and it is the most common mis-order on these openings. A lever control lock such as the SDC Selectric 7800 PRO Series solenoid controlled mortise lock with vandal resistant clutch decides whether the outside lever will throw the latch; the latch still sits in the strike until someone turns the lever. An automatic operator has no hand on the lever, so the latch has to be pulled clear electrically first. That is what the Command Access LPM1 does - 24VDC electronic latch retraction with circuitry that supports both momentary and continuously on operation, which is the mode an operator or a handicap access button needs. The DynaLock EML-1 Series is likewise a storeroom function lock, which is a lever control function, not a retraction function.
10) Can I reuse the existing Schlage L series mortise prep if I switch to an electrified lock?
Yes, with the Command Access LPM1. It fits a standard mortise pocket prepped for Schlage L series locks with no special door prep, uses standard type 86 door prep, and retrofits to Schlage L9000 compatible trim - it is also offered as a chassis only for exactly that retrofit. So a door currently carrying a Schlage L Series lock such as the L9050BDC, a Grade 1 heavy duty mortise lock for 1-3/4 inch doors, can take the LPM1 chassis in the same pocket. Power is the added scope: the LPM1 needs 24VDC at 260mA holding with a 1.9A surge, and its PM300 circuitry allows favorable wire runs and multiple locks on one supply.
11) Is the Command Access LPM1 heavy enough for a high-traffic commercial opening like a hospital or school corridor?
Yes. It is a Grade 1, heavy-duty commercial chassis, which is the top ANSI/BHMA tier for cycle count and strength and the grade normally specified for institutional corridors, healthcare and education. Command Access lists healthcare, educational, retail and industrial facilities as its target applications. For a light residential or interior door this is more lock than the opening needs.
12) Do I need to order lever and rose trim separately with the Command Access LPM1, or is it a complete lockset?
Both ways are available. The LPM1 comes as a complete lockset when you need lever and rose, or as a chassis only when you are retrofitting into existing Schlage L series compatible trim that is staying on the door. The pictured configuration is the LPM110EU with an 06 lever and A rose. Decide this before ordering, because the chassis only part will not come with anything to grip.
13) Can I run several Command Access LPM1 locks off one access control power supply?
Yes, that is what the PM300 circuitry is for. It supports multiple locks on a single power supply and allows more favorable wire runs than a raw solenoid would. The number you can share depends on your supply, so work from the 1.9A surge per lock rather than the 260mA hold, since simultaneous retraction is the worst case an electrician has to plan for.
14) What is the difference between the SDC 7800 PRO and the Command Access LPM1 electrified mortise lock?
They solve different problems in the same pocket. The SDC Selectric 7800 PRO Series is a solenoid controlled mortise lock with a vandal resistant clutch, listed for 1-3/4 inch doors - the solenoid controls whether the outside lever engages the latch, and the clutch lets the lever spin free under force without damaging the works. The Command Access LPM1 does not control a lever; it is a passage function lock that electrically retracts the latchbolt itself at 24VDC, which is what a push-pull opening or an automatic operator needs. If the requirement is an abuse-resistant lever that locks and unlocks electrically, the 7800 PRO is the match; if the requirement is pulling the latch out of the strike on command, the LPM1 is.
How fast can I get the Command Access LPM110EU 06A 24V 626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Command Access LPM110EU 06A 24V 626 come with a warranty?
Absolutely. The Command Access LPM110EU 06A 24V 626 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Command Access LPM110EU 06A 24V 626?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Command Access LPM110EU 06A 24V 626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!