Conduit and Voltage Marker Cards - Vinyl
Notes
- Order Multiple 25 cards.
- Character height 7/8 inches.
Features
- Manufactured of rugged Self-Sticking Vinyl with high-contrast black printing on safety orange background.
- OSHA compliant.
- Helps prevent mistakes and trial and error searching during electrical service work.
Manufacturer Resources
Product Specs
- Inner Package:
- 25
- Legend:
- 380 VOLTS
- Markers Per Sheet:
- 4
- Order Multiple:
- 25
- Outer Package:
- 600
- Product Group:
- Safety
- Rohs Compliance:
- Yes
- T B Sold In Uom:
- Each
- T B Weight Per Uom:
- 10 lbs. per 1000
- Department:
- Electrical
- Product Subgroup:
- Marking Labels
- Product Color:
- Black on Orange
- Product Style:
- B - 1 1/8" x 4 1/2"
Thomas & Betts WDT-5057 – Frequently Asked Questions
1) What does the Thomas & Betts WDT-5057 marker card actually say?
The legend reads 380 VOLTS, printed in black on a safety orange background. Character height is 7/8 inch, so it stays readable from a distance in a panel room or on a conduit run overhead.
2) What size is each 380 VOLTS marker, and will it wrap a small conduit?
Each marker is style B, 1-1/8 inches by 4-1/2 inches. The 4-1/2 inch dimension is the run of the label, so it wraps fully around smaller trade sizes and applies flat along the length of larger conduit, boxes, or gutter covers.
3) Are these 380 volt markers OSHA compliant for labeling energized conduit?
Thomas & Betts states the WDT-5057 marker cards are OSHA compliant. The black-on-orange color scheme is the standard warning combination for energized electrical equipment, which is why these read as orange rather than the red or yellow used for other hazard classes.
4) Do I need any adhesive or carrier to apply these conduit markers?
No. The WDT-5057 is self-sticking vinyl, so the marker peels off the card and goes straight onto clean conduit or enclosure surface. No wire ties, carriers, or separate adhesive to order.
5) Will one card of WDT-5057 markers cover a voltage other than 380?
No. Every marker on the card reads 380 VOLTS. It is a single-legend card, so a panel carrying 208V, 480V, or 600V feeders needs the matching voltage card in the same Thomas & Betts WDT marker series ordered separately.
6) Are Thomas & Betts WDT conduit markers RoHS compliant for a government or institutional spec?
Yes, the WDT-5057 is RoHS compliant, which covers most public agency and institutional procurement specs that call for restricted-substance conformance on installed materials.
How fast can I get the Thomas & Betts WDT-5057 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts WDT-5057 come with a warranty?
Absolutely. The Thomas & Betts WDT-5057 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts WDT-5057?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts WDT-5057 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.