You may also like
Eaton IEC 3-Pole Contact Kit for Freedom Series Contactors, Sizes J and K
Model: EAT-6-65-17
Eaton IEC 3-Pole Contact Kit for Freedom Series Contactors, Sizes J and KThe Eaton IEC 3-Pole Contact Kit is a genuine renewal part engineered to restore Freedom Series IEC contactors to full working...
Eaton
$1,166.91
Eaton Citation Contact Kit, Series C1, 3-Pole, Size 6-7
The Eaton Citation Contact Kit is a renewal part engineered for Series C1 contactors, Size 6-7, in a 3-pole configuration. Built to restore original contactor performance, this kit is intended for maintenance technicians and electrical contractors servicing existing Eaton Citation contactor assemblies. As a classified Renewal Parts/Accessories item, it supports code-compliant repair of motor control equipment without full assembly replacement.
Key Features
- Series C1 Fit: Sized specifically for Citation Series C1 contactors, Size 6-7, for accurate renewal and repair.
- 3-Pole Configuration: Matches 3-pole contactor arrangements commonly used in three-phase motor control circuits.
- Compact Dimensions: Product measures 4.3 in in width, 5.9 in in length/depth, and 3.8 in in height, fitting standard Citation contactor housings.
- Renewal Parts/Accessories Classification: Designed as a service part for maintaining and extending the life of existing Eaton Citation contactor installations.
- Eaton Manufactured: Sourced directly from Eaton for consistent fit and function with original Series C1 equipment.
Technical Specifications
- Product Width: 4.3 in
- Product Length/Depth: 5.9 in
- Product Height: 3.8 in
- Type: Renewal Parts/Accessories
- Warranty: Not Applicable
- Department: Electrical
Typical Applications
- Motor Control Centers
- Industrial Contactor Maintenance and Repair
- Three-Phase Motor Starter Circuits
- Panelboard and Switchgear Servicing
- Renewal of Eaton Citation Series C1 Contactor Assemblies
Why Eaton?
Eaton renewal parts are manufactured to match original Citation Series C1 contactor specifications, helping electrical professionals maintain reliable, code-compliant motor control systems. Choosing an Eaton-sourced contact kit for this 3-pole, Size 6-7 application helps ensure proper fit and dependable performance when servicing existing installations.
Manufacturer Resources
Product Specs
- Product Width:
- 4.3 in
- Warranty:
- Not Applicable
- Product Length/Depth:
- 5.9 in
- Product Height:
- 3.8 in
- Product Type:
- Replacement Contact Kit
- Certifications:
- Not Applicable
- Department:
- Electrical
- Series:
- C1
- Configuration:
- 3-Pole
- Product Group:
- Motor Control & Automation
- Product Subgroup:
- Contactors & Relays
Eaton 6601 – Frequently Asked Questions
1) Can I just replace the contacts instead of the whole Citation contactor?
That is exactly what the 6601 kit is for. It is a renewal part that restores the contact surfaces in an existing Citation Series C1 Size 6-7 contactor, so the starter, its enclosure, wiring and coil stay in place. For MCC buckets and three-phase motor starters that means a contact change on the shelf rather than pulling and re-terminating a complete assembly.
2) I have a 2-pole Citation contactor. Will a 3-pole contact kit work?
No. Kit 6601 is a 3-pole set, matched to the three-phase pole arrangement in a Citation C1 Size 6-7 contactor. Pole count is part of the kit's identity, not an option you leave off, so a 2-pole contactor needs the kit built for it. Buying the 3-pole set and leaving one pole in the box is not a fit.
3) What part number do I give my supplier for the Eaton Citation C1 Size 6-7 3-pole contact kit?
Eaton manufacturer part number 6601. Pair that with the contactor data you read off the nameplate, Citation, Series C1, Size 6-7, 3-pole, and the order is unambiguous. Techs stocking spares for a motor control center usually order it against the specific bucket sizes they have rather than one kit for the whole lineup, since each frame size range has its own kit.
4) Is there a difference between an Eaton contact kit and a Square D contact kit if both are 3-pole?
Yes. Pole count describes the circuit arrangement, not the fit. The Eaton 6601 is a Citation Series C1 renewal part for Size 6-7 contactors and measures 4.3 in wide by 5.9 in deep by 3.8 in high, sized to drop into Citation contactor housings. The Square D 9998SL series kit is a NEMA contactor replacement contact kit for NEMA Size 2. Two 3-pole kits from different manufacturers are built to different contactor frames, so the manufacturer and frame size on the starter are what select the kit.
5) How much room do I need to store or stage the Eaton 6601 contact kit?
The packaged kit measures 4.3 in wide, 5.9 in in length/depth and 3.8 in high, small enough to hold on a service cart or in a parts bin alongside the other renewal items for a motor control center. Nothing about those figures is the contactor's footprint, they describe the kit itself.
How fast can I get the Eaton 6601 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Eaton 6601 come with a warranty?
Absolutely. The Eaton 6601 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Eaton 6601?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Eaton 6601 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.