Corbin Russwin Dummy Grade 1 T...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$102.00
$67.20
Corbin Russwin Dummy Trim P8 Wing Pull for ED2200/ED2400 Exit Devices

Corbin Russwin Dummy Grade 1 Trim P8 Wing Pull for ED2200/ED2400 Exit Devices

(No reviews yet) Write a Review

Model: P1850ET 689
$102.00
$67.20
Selected Finish is
Selected Lever Trim Design is
Selected Keying is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$102.00
$67.20
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Corbin Russwin P1850ET Dummy Trim P8 Wing Pull for ED2200/ED2400 Exit Devices, Grade 1, Non-Handed

Commercial-Grade Exit Device Trim for Barrier-Free Code Compliance

The Corbin Russwin P1850ET is a heavy-duty steel Dummy Trim P8 Wing Pull designed specifically for use with ED2200 and ED2400 Series exit devices. This non-handed trim accommodates standard 1-3/4" (44mm) door thickness and standard 36" (914mm) door width, making it a versatile solution for a wide range of commercial door applications. ANSI/BHMA Grade 1 certified and designed with a low-profile, no-projecting-parts configuration, this trim supports barrier-free code compliance and ADA requirements. Devices are available to satisfy C-UL US safety and fire requirements.

Professional Features & Benefits

  • Heavy-duty cold-forged steel chassis with electroplated corrosion resistance
  • Latchbolt: stainless steel pullman-type, 3/4" (19mm) throw with deadlocking auxiliary latch
  • Non-handed device (except double cylinder and lever trim which are handed)
  • Standard bar length 36" (fits 30"–36" doors); easily field cut; optional 24" or 48"
  • Standard single-point 1/4-turn hex key dogging on panic devices
  • Free Wheeling levers for vandal resistance on trim
  • SecureBolt® option (ED5200S): deadbolt-style latchbolt resists unauthorized entry
  • Electrified options including delayed egress, electric latch retraction, and electric dogging
  • UL-listed panic and 3-hour fire exit hardware; NFPA 101 and NFPA 80 compliant
  • Full range of trim with Muséo® and Vineyard™ collections
  • ADA compliant — lever trims and pulls comply with Americans with Disabilities Act
  • PathLite™ photoluminescent touchpad cover option available
  • Five-year limited warranty; ED5800 CVR certified to 3.25 million cycles

Technical Specifications

  • Grade: ANSI/BHMA A156.3 Grade 1
  • Handing: Non-handed standard (lever trim and double cylinder devices are handed)
  • Bar Length: 36" standard (fits 30"–36" doors); optional 24" or 48"
  • Door Thickness: 1-3/4" (44mm) standard; optional 2" (D200) or 2-1/4" (D214)
  • Minimum Stile Width: 4-1/2" (114mm)
  • Latchbolt — Rim (ED5200): Stainless steel pullman-type, 3/4" (19mm) throw with deadlocking auxiliary latch
  • Latchbolt — SecureBolt® (ED5200S): Deadbolt-style, 3/4" (19mm) projection x 1" wide, positive deadlocking by auxiliary bolt
  • Latchbolt — SVR (ED5400): Top: 3/4" throw pullman-type deadlocking; Bottom: 5/8" throw deadbolt
  • Projection: 3-1/4" (83mm) active; 2-3/4" (70mm) dogged
  • Dogging: Single-point 1/4-turn hex key; optional cylinder or electric dogging
  • Strike: Surface-mounted 3/8" roller strike with positive locking plate and shims
  • Certifications: ANSI A156.3 Grade 1; UL/cUL panic and 3-hour fire exit hardware; NFPA 101; NFPA 80; ADA; California State Fire Marshal approved
  • Warranty: Five-year limited

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose Corbin Russwin Quality?

Corbin Russwin exit device trim products deliver professional-grade reliability through heavy-duty steel construction and ANSI/BHMA Grade 1 certification, ensuring performance in the most demanding commercial environments. This dummy trim is backed by a one-year manufacturer warranty and is available in configurations that satisfy C-UL US safety and fire requirements. Engineered for seamless integration with the ED2200/ED2400 Series, Corbin Russwin hardware provides the dependable, code-compliant performance that commercial facilities require.

Manufacturer Resources

Corbin Russwin Condensed Catalog

Product Specs

Subcategory:
Cylindrical Locks
Product Group:
Exit Devices and Trim
Series:
ED2200/ED2400 Series
Grade:
Grade 1
Duty Level:
Heavy Duty
Keyed Function:
Non-Keyed
Product Subgroup:
Exit Device Trim
Product Type:
Exit Device Trim
Keyed:
No
Commercial/Residential:
Commercial
Function Description:
Entrance by trim when actuating bar is locked down.
Lock Type:
Exit Device
Handle Type:
Flat Plate/Pull
Lock Function:
Dummy
Product Attribute:
Cylindrical Locks
Product Model:
1850ET
Product Function:
Dummy
Door Hand Direction:
Non-Handed
Product Category:
Mechanical Locks
Department:
Door Hardware

Corbin Russwin P1850ET 689 – Frequently Asked Questions

1) What does a dummy trim like the Corbin Russwin P1850ET actually do on an exit device?
A dummy pull is a fixed pull with no working latch mechanism behind it. The P1850ET mounts on the outside of an ED2200 or ED2400 exit device and gives you something to grab, but the door only opens from outside when the push bar is dogged down. The function reads as: entrance by trim when the actuating bar is locked down. If you need the outside to unlock with a key or a lever that retracts the latch, this is the wrong trim.
2) Do I have to specify a hand when ordering the P1850ET wing pull?
No handing to specify. The P8 wing pull trim is non-handed, so the same part goes on a left- or right-hand door. That matters on a fleet order where you are replacing pulls across a building and do not want to survey every opening first.
3) Will the Corbin Russwin P1850ET trim work on a 1-3/4 inch commercial door?
Yes, 1-3/4 inch (44mm) is the standard door thickness this trim is built around, on a standard 36 inch (914mm) door width. That is the normal commercial thickness, so most hollow metal and commercial wood openings take it without any special order.
4) Is the P8 wing pull trim ADA compliant and Grade 1?
ANSI/BHMA A156.3 Grade 1, and the pull complies with ADA requirements. The low-profile shape has no projecting parts, which is what keeps it clear on a barrier-free egress path. For institutional specs calling out Grade 1 exit hardware trim, this meets that line.
5) Should I use a dummy pull or a lever trim on the outside of my exit device?
It comes down to whether outside entry needs to be controlled. A dummy wing pull such as the P1850ET is a pull only, so people get in from outside only while the bar is dogged. If you need the outside to unlock and relock on a schedule or by key, go to a functional trim: Deltana's LTED80LS is an entry-function lever for 80 series devices, the Detex 08BN is a classroom-function lever, and the Sargent 814 PSB is a night latch pull. For a plain filler with no pull at all, the Sargent 802 blank plate or Von Duprin 379L-BE blank escutcheon covers the prep instead.
6) What is the closest equivalent to the Corbin Russwin P1850ET dummy trim if the door is on a Sargent 80 Series exit device?
The Corbin Russwin P1850ET is a dummy trim built for ED2200/ED2400 Series exit devices, so it will not mount to a Sargent chassis. On a Sargent 80 Series device, the Sargent 802 blank plate trim is the corresponding no-key, no-turn pull-side plate; it is a Grade 1 blank plate trim in the PE80 Series. Match the trim to the device family the door already carries, since exit device trim is prepped to the manufacturer's own chassis pattern.
7) The opening needs key control from the outside, not just a pull. What replaces a P1850ET dummy trim?
The Corbin Russwin P1850ET is a non-keyed dummy trim - it gives entrance by trim when the actuating bar is dogged down, and nothing more. Where the outside has to be locked and opened by key, a keyed function trim is the right part instead: the Detex 08BN is a classroom-function S-lever trim with a mortise cylinder, and the Arrow SRX87 is a classroom-function Sierra lever trim for the S1150/S1250/ED910/PEC910 Series. Both are device-family specific, so confirm the exit device before ordering.
8) What is the difference between the Corbin Russwin P1850ET wing pull and a blank escutcheon trim like the Von Duprin 379L-BE?
Both are non-keyed outside trims, but they differ in whether there is anything to grab. The Corbin Russwin P1850ET is a flat plate/pull handle type - the P8 wing pull gives a hand hold for pulling the door open when the bar is dogged. The Von Duprin 379L-BE is a blank escutcheon trim for 55 Series rim exit devices, Grade 1 heavy duty, and the Sargent 802 is a blank plate for the PE80 Series; a blank covers the device prep and leaves the outside with no pull at all. Choose the pull where the door is used as an entrance while dogged, and the blank where the outside should stay exit-only.
9) We want a pull trim that also latches the door when it closes. Is the P1850ET the right part?
No. The Corbin Russwin P1850ET is a dummy trim - it allows entrance by trim only when the actuating bar is dogged down, so it does not retract a latch on its own. For a pull that operates the latch by key, the Sargent 814 PSB is a night latch pull exit device trim, heavy duty, in the 80 Series. Night latch means the outside stays locked and the key retracts the latch; dummy means the outside is either open, because the device is dogged, or it is not.
10) What should we use instead of a P1850ET if we want keyless code entry on the outside of the exit device?
The Corbin Russwin P1850ET is a non-keyed dummy trim with no credential of any kind. For coded entry on the outside of an exit device, the Dormakaba E-Plex E5010 is an electronic push button exit device lever trim with key override, Grade 1, fitting 1-3/8 inch to 2-1/4 inch doors; the BEST EXZ is an electronic keypad exit device trim with key override in the EZ Series; and the Lockey 115P and 285P are mechanical keyless panic trims for doors 1-3/16 inch to 2 inch thick. All of these give the outside a controlled opening rather than a fixed pull.
11) Is there another pull-style exit device trim if the Corbin Russwin wing pull is not the right shape?
Two other pull profiles worth looking at, both Grade 1: the Sargent 862 offset pull handle from the P800 line, and the Detex A Series straight pull with a blank escutcheon for Value Series devices. Both are pulls rather than latch-retracting trim, same as the wing pull, so the functional behavior does not change, only the grip shape and the device family they mount to.
12) Does the P1850ET dummy trim need a cylinder or keying?
No cylinder and no keys. The wing pull is a non-keyed dummy, so there is nothing to pin, nothing to key alike, and nothing to add to a master key system. Outside access is controlled by whether the push bar is dogged, not by a key.
13) Is a Sargent 862 offset pull the same thing as a Corbin Russwin P1850ET wing pull?
They serve the same purpose from opposite catalogs. The Corbin Russwin P1850ET is a Grade 1 dummy trim with the P8 wing pull, made for ED2200/ED2400 Series devices. The Sargent 862 is a Grade 1 offset pull handle for exit devices in the P800 Series. Both are pull-only trim with no key function, so the deciding factor is the device family and the pull shape - a wing pull versus an offset pull sit differently in the hand and project differently off the face of the door.
14) ADA requires a lever on our openings. What lever trim replaces the P1850ET wing pull?
The Corbin Russwin P1850ET carries the P8 wing pull rather than a lever. Where a lever is wanted, the function decides the part: the Deltana LTED80LP is passage function, the LTED80LS is entry function, and the DDS-36 and LTED60LST are storeroom function lever trims for exit devices. Note that a wing pull and a lever both satisfy a no-tight-grasping operation, so the choice is usually about whether the outside needs to lock, not about the grip itself.
15) Which of these exit device parts are not trim substitutes at all?
Two items in the exit device family look adjacent but solve a different problem. The Detex 90 Series keyed removable mullion is a mullion for rim exit devices - it makes a pair of doors into two independent rim openings and mounts in the opening, not on the door face. The ACSI ED4200-W036 is a Corbin Russwin ED4000 Series rim exit device with 24 volt electric latch retraction, Grade 1 wide stile - that is the device itself, not the outside trim. The Corbin Russwin P1850ET is exit device trim, the outside-face part that mounts to a device already on the door.
16) Is there a simpler pull trim than the P1850ET for a back-of-house door?
The Detex 0A straight pull trim with blank escutcheon, in the A Series for Value Series exit devices, is a plain pull-and-blank-plate combination - a straight pull rather than the shaped P8 wing pull on the Corbin Russwin P1850ET, and no key prep on either. The Corbin Russwin part is a Grade 1 heavy duty commercial trim built to the ED2200/ED2400 pattern, so the practical constraint is still the device on the door: the Detex trim goes on Detex Value Series devices, not on an ED2200.
17) Our door already has a cylinder in the outside trim. Can a P1850ET take its place?
Only if the opening no longer needs that cylinder. The Corbin Russwin P1850ET is a non-keyed dummy trim, so swapping it in removes key access from the outside. If the goal is to keep the cylinder hole and lose the handle, the Detex 03WS is a trim plate with a cylinder hole for 10/20/21/27 Series devices - a plate that still accepts a rim cylinder. Decide first whether the outside should remain key-operable, then match the trim to the device series on the door.
18) What finishes does the Corbin Russwin P8 wing pull come in?
Three finishes: 689 anodized aluminum, 691 light bronze, and 695 dark bronze painted. If you are matching existing storefront or aluminum entrances, 689 is the usual aluminum match and 695 the usual dark bronze match on painted frames.
19) Is this Corbin Russwin wing pull heavy duty enough for a high traffic entrance?
It is built as heavy duty commercial trim, steel construction with electroplated corrosion resistance, and carries the Grade 1 rating that goes with school, healthcare, and multi-tenant entry traffic. As a dummy pull it has no moving latch parts to wear, which is part of why it holds up on doors that get pulled on all day.
How fast can I get the Corbin Russwin P1850ET 689 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Corbin Russwin P1850ET 689 come with a warranty?
Absolutely. The Corbin Russwin P1850ET 689 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Corbin Russwin P1850ET 689?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Corbin Russwin P1850ET 689 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!