Corrosion Free Formula 8000 In...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$19.32
$13.80
Corrosion Free Formula 8000 Industrial Rust and Corrosion Fighting Lubricant, Squeeze Bottle

Corrosion Free Formula 8000 Industrial Rust and Corrosion Fighting Lubricant, Squeeze Bottle

(No reviews yet) Write a Review

Model: COFS-F8000 BD670

In Stock (leaves warehouse same day if ordered before 3pm ET)

$19.32
$13.80
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Corrosion Free Formula 8000 Industrial Rust and Corrosion Fighting Lubricant, Squeeze Bottle

Especially formulated for humid, acidic and salt spray environments. Where to use Stanley lock lube procedure apply one quick spray of BD660 corrosion free formula 8000 industrial lubricant in both shackle holes every six months. The shackle can be in either the locked or the unlocked position. It is not necessary to disassemble the padlock in order to lubricate it.

Note: Lubricate more often if the padlock is used frequently or is located in a corrosive environment.

Terminates rust and corrosion in all metals Prevents the start of new corrosion dissolves and neutralizes existing corrosion penetrates deeply and lubricates clear, clean – no sticky residue. Stops electrolysis between dissimilar metals. Controls galvanic corrosion. Repels salt water and moisture. Will not wash off with water. Longer lasting protection.

 

Features

  • Active Moisture Displacement: Penetrates deep into crevices to drive out moisture and "kill" rust on contact by cutting off its oxygen supply.

  • Long-Lasting Lubrication: Reduces friction and wear on moving parts without the use of toxic solvents, silicones, or graphite.

  • Non-Conductive & Safe: High dielectric strength makes it safe for use on electrical connections, circuit boards, and battery terminals.

  • Drip-Free & Clean: The "squeeze bottle" design allows for precise application, ensuring the lubricant stays where it's needed without messy runoff.

  • Versatile Surface Safety: Safe for use on metals, plastics, rubber, and painted surfaces; it will not cause rubber to swell or paint to peel.

  • Environmentally Friendly: Formulated to be non-toxic and non-hazardous for safer handling in industrial and residential settings.

Specifications

  • Container Type: Squeeze Bottle (for precision targeting).

  • Film Type: Clean, clear, non-drying polar bond film.

  • Dielectric Strength: Over 30,000 volts, making it ideal for protecting sensitive electronics.

  • Temperature Range: Remains effective in extreme cold (down to -50°C) and won't evaporate in high heat.

  • Application Areas: Automotive chassis, electrical panels, hinges, sliding tracks, marine hardware, and industrial machinery.

  • Standards: Meets or exceeds various industrial and military specifications for corrosion prevention.

Manufacturer Resources

Product Specs

Container:
Squeeze Bottle
Product Type:
Liquid Lubricant
Department:
Door Hardware
Product Group:
Lubricants
Product Subgroup:
Locksmith Equipment
Application:
Lubricants

Corrosion Free COFS-F8000 BD670 – Frequently Asked Questions

1) Can Corrosion Free Formula 8000 be used on electrical panels and battery terminals without shorting anything?
Yes. Formula 8000 is non-conductive with a dielectric strength over 30,000 volts, so it can go on electrical connections, circuit boards and battery terminals as well as bare metal. That is what separates it from a general shop oil for an MRO tech working inside a panel.
2) How do I lubricate a padlock with Formula 8000 without taking it apart?
Apply one quick shot into both shackle holes every six months. The shackle can be locked or unlocked, and there is no need to disassemble the padlock. Step up the frequency if the lock gets heavy use or sits in a corrosive spot like a coastal gate or a wash-down area.
3) Will this lubricant hurt painted doors, rubber seals or plastic trim if it runs?
No. Formula 8000 is safe on metals, plastics, rubber and painted surfaces; it will not swell rubber or peel paint. It also dries to a clean, clear non-drying polar bond film rather than a sticky residue, so it will not grab dust on a hinge or a sliding track.
4) Is a graphite lock lube or this liquid better for exterior padlocks and hardware?
Formula 8000 contains no graphite, silicones or toxic solvents. Graphite stays dry and is common in cylinders, but it does nothing for rust. This one both lubricates and works the corrosion problem: it dissolves and neutralizes existing corrosion, blocks new corrosion, repels salt water and will not wash off with water. For outdoor, coastal or wash-down hardware that is the trade-off that matters.
5) Will Formula 8000 still work on gate hardware in a freezing climate?
It stays effective down to -50C and will not evaporate off in high heat, so a gate hinge, exterior padlock or sliding track treated in the fall is still protected through winter.
6) Does Formula 8000 stop corrosion between dissimilar metals, like aluminum hardware on steel?
Yes. It stops electrolysis between dissimilar metals and controls galvanic corrosion, which is the usual failure on aluminum-and-steel fastener joints, marine hardware and exterior mixed-metal assemblies.
7) Why choose the squeeze bottle instead of an aerosol for this rust lubricant?
The squeeze bottle puts the fluid exactly where you point it, with no overspray onto adjacent finishes and no runoff down a door face. Useful on interior work, inside electrical enclosures, or anywhere an aerosol cloud is a problem. Aerosol is the better choice when you need to flood a large chassis area or reach up into a blind cavity.
8) What part number do I order for the Corrosion Free Formula 8000 squeeze bottle?
Corrosion Free Formula 8000 industrial rust and corrosion fighting lubricant in the squeeze bottle is model COFS-F8000 BD670, manufacturer part number 51100. It ships as a single configuration, so there is no size or container choice to specify on the order.
9) Can I use this on things other than locks, or is it only a locksmith product?
It is a general industrial lubricant that happens to suit lock work. Listed application areas include automotive chassis, electrical panels, hinges, sliding tracks, marine hardware and industrial machinery, so one bottle covers most of a property maintenance cart, not just padlocks and cylinders.
How fast can I get the Corrosion Free COFS-F8000 BD670 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Corrosion Free COFS-F8000 BD670 come with a warranty?
Absolutely. The Corrosion Free COFS-F8000 BD670 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Corrosion Free COFS-F8000 BD670?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Corrosion Free COFS-F8000 BD670 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!