Metallics CMT1 Counduit Measuring Tape 3/16" 3000ft

The CMT1 is a 3000 ft roll of 3/16 inch conduit measuring tape, used to measure the length of an installed conduit run before you pull wire. You feed the tape through the raceway, read the footage marks at the far end, and cut your conductors to length instead of guessing. The 3000 ft roll length lets one reel cover a lot of runs on a commercial or multi-family job.

Order Metallics part number CMT1. That covers the complete 3000 ft roll of 3/16 inch conduit measuring tape as a single item, so there are no separate length or width options to specify.

At 3000 ft on the roll, the CMT1 will reach through most building risers, feeder runs, and site conduit in a single pass. Where it will not work is a run longer than 3000 ft of continuous conduit between pull points, or any situation where you need two crews measuring at once. In those cases order a second roll rather than splicing the tape, since a spliced joint hangs up at couplings and bends.