You may also like
Klein Tools 1005-INS Insulated Crimping and Cutting Tool
Model: KLN-1005-INS
Insulated Crimping and Cutting Tool
Warnings
Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
Wear approved eye protection.
Do NOT touch uninsulated...
Klein Tools
$157.09
$107.09
Klein Tools 1006 Crimping and Cutting Tool for Non-Insulated Terminals
Model: KLN-1006
Crimping and Cutting Tool for Non-Insulated Terminals
Warnings
Always wear approved eye protection.
NOT insulated. Plastic-dipped or slip-on plastic handles are NOT intended for protection against...
Klein Tools
$111.70
$61.70
Klein Tools Journeyman™ Pliers Connector Crimp Side Cut 9-Inch
Model: KLN-J213-9NECR
Journeyman™ Pliers Connector Crimp Side Cut 9-Inch
Warnings
Always wear approved eye protection.
NOT insulated. Plastic-dipped or slip-on plastic handles are NOT intended for protection against...
Klein Tools
$124.00
$74.00
Klein Tools D213-9NE-CR-INS Cutting Crimping Pliers, Insulated, 9-Inch
Model: KLN-D213-9NE-CR-INS
Cutting Crimping Pliers, Insulated, 9-Inch
Warnings
Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
Because moisture, films, or other surface...
Klein Tools
$179.84
$129.84
Crimping and Cutting Tool for Connectors, Insulated
1005RINS - spec sheet
Warnings
- Always wear approved eye protection.
- Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
- Only use tools that are marked with the official international 1000-volt rating symbol shown below, if there is any chance that the tools will make contact with an energized source.
- Always inspect your tools before use.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
Features
- Flame Retardant and Impact Resistant Handle
- Wire cutter in nose that is tapered for working in confined spaces, and induction hardened cutting knives for long life
- Flame retardant, impact-resistant, bright orange and gray outer coating
- Made in USA
- Hot-riveted joint for smooth action and no handle wobble
- Multi-layer grip provides comfort and protection against electrical shock
- Crimper crimps insulated and non-insulated 10-22 AWG solderless terminals and connectors
- Individually tested to meet or exceed ASTM F1505-16 and IEC 60900 standards for insulated tools, and clearly marked with the official 1000V rating symbol
1005RINS - spec sheet
Manufacturer Resources
Product Specs
- Cut Style:
- Knife on Anvil
- Cutting Knives:
- Standard
- Depth:
- 9.8300 in
- Handle Color:
- Orange/Light Gray
- Handle Finish:
- 2-Layer Insulation
- Handle Length:
- 5.73" (14.6 cm)
- Handle Material:
- High-Dielectric Plastic Cushion Grip
- Height:
- 1.2800 in
- Insulated:
- Yes
- Jaw Length:
- 1.3" (3.3 cm)
- Jaw Width:
- 0.16" (0.4 cm)
- Joint Type:
- Hot-Riveted
- Knife Length:
- 0.560" (1.4 cm)
- Material:
- Induction Hardened Steel
- Nose Type:
- Tapered
- Overall Height:
- 1.28" (3.3 cm)
- Overall Length:
- 9.83" (25 cm)
- Overall Width:
- 2.56" (6.5 cm)
- Strips And Cuts Awg Solid:
- 22-Oct
- Strips And Cuts Awg Stranded:
- 22-Oct
- Tether Capable:
- No
- Type:
- Combination Cutter Crimper
- Weight:
- 0.8620 lbs
- Width:
- 2.5600 in