Crouse-Hinds 461DC EMT Set Scr...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$0.68
Crouse-Hinds 461DC EMT Set Screw Coupling, Die Cast Zinc, 3/4-Inch

Crouse-Hinds 461DC EMT Set Screw Coupling, Die Cast Zinc, 3/4-Inch

(No reviews yet) Write a Review

Model: 461DC

In Stock (leaves warehouse same day if ordered before 3pm ET)

$0.68
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Crouse-Hinds 461DC EMT Set Screw Coupling, Die Cast Zinc, 3/4-Inch

The Crouse-Hinds 461DC is a 3/4-Inch EMT set screw coupling built from natural die cast zinc, engineered to join two lengths of electrical metallic tubing (EMT) into a continuous, secure raceway. This coupling relies on a set screw connection to lock EMT conduit sections in place, providing a dependable mechanical and electrical bond for commercial, industrial, and residential wiring installations. The natural die cast zinc construction delivers a rigid, corrosion-resistant fitting suited for standard indoor conduit runs where a compact, reliable EMT coupling is required. Electricians and contractors rely on set screw couplings like the 461DC for quick, tool-based installation that does not require special crimping equipment, making it a practical fixture on job sites where speed and repeatability matter. Because the coupling is purpose-built for EMT, it maintains a snug fit on standard 3/4-Inch tubing outside diameters, helping preserve the raceway's integrity along its full run.

Key Features

  • Trade Size: 3/4-Inch, sized for standard 3/4-Inch EMT conduit runs.
  • Durable Construction: Natural die cast zinc body provides a rigid, corrosion-resistant fitting for long-term performance.
  • Set Screw Connection: Set screw design allows fast, tool-based installation while maintaining a firm mechanical grip on EMT conduit ends.
  • EMT Compatible: Purpose-built to couple electrical metallic tubing (EMT), joining two conduit runs into a single continuous raceway.
  • Compact Profile: Streamlined coupling body fits standard EMT conduit runs without adding excessive bulk to the raceway system.
  • Secure Mechanical Bond: The set screw firmly clamps onto each EMT section, helping maintain continuity of the raceway and supporting a stable connection point between conduit runs.

Technical Specifications

  • Product Type: Conduit Coupling
  • Material: Natural Die Cast Zinc
  • Trade Size: 3/4-Inch
  • Connection Type: Set Screw
  • Conduit Type: EMT (Electrical Metallic Tubing)

Typical Applications

  • Commercial and Industrial Electrical Installations
  • EMT Conduit and Raceway Systems
  • Joining and Extending EMT Conduit Runs
  • New Construction and Renovation Wiring Projects
  • Residential EMT Raceway Installations

Why Crouse-Hinds?

Crouse-Hinds engineers electrical fittings like the 461DC coupling with durable die cast zinc construction to ensure a secure, long-lasting connection between EMT conduit sections. The set screw design offers electricians and contractors a straightforward, reliable method for joining EMT runs, making this coupling a practical choice for professional electrical installations that demand consistent, code-compliant performance. With its compact profile and rigid, corrosion-resistant body, the 461DC is built to hold up in the demanding conditions of commercial, industrial, and residential job sites where dependable EMT raceway connections are essential.

Manufacturer Resources

Product Specs

list_batch:
CRS-20260917
Product Type:
Conduit Coupling
Department:
Electrical
Product Subgroup:
Conduit Fittings
Product Size:
3/4"
Product Length:
4.95 in
Product Height:
1.94 in
Product Width:
3.43 in
Product Weight:
0.07 lb
Product Material:
Zinc Die Cast
Product Group:
Conduit & Raceway

Crouse-Hinds 461DC – Frequently Asked Questions

1) Will the Crouse-Hinds 461DC coupling work on rigid or IMC conduit, or only EMT?
EMT only. The 461DC is built to join two lengths of electrical metallic tubing, and it grips the tubing's outside diameter with set screws rather than threading on. Rigid and IMC are threaded and have a larger OD at the same trade size, so a threaded coupling is what you need there.
2) Can I use a set screw coupling like the 461DC in a wet or outdoor location?
Set screw fittings are for dry indoor raceway runs. The 461DC's die cast zinc body is corrosion resistant and suited to standard indoor conduit runs, but a set screw joint is not raintight. For damp, wet, or outdoor work, use a compression (raintight) EMT coupling instead.
3) Do I need a crimper or special tool to install a set screw EMT coupling?
No. The 461DC tightens with a screwdriver or a nut driver on the set screws, which is why electricians reach for set screw fittings on repetitive runs. Compression fittings need no special tool either, but set screw goes faster and costs less; crimp-type fittings are the ones that require dedicated equipment.
4) Does the 461DC coupling maintain ground continuity between EMT sections?
The set screws bite into each tube to form a mechanical and electrical bond between the two sections, which is how a set screw coupling keeps the metal raceway continuous. Tighten both screws fully; a loose screw is where continuity is lost.
5) What is the exact part number to order for a Crouse-Hinds 3/4 inch set screw EMT coupling?
Crouse-Hinds 461DC. That single catalog number covers the 3/4 inch die cast zinc set screw coupling, so there is no finish or length option to specify when you order.
6) Is a coupling the right fitting if I am connecting EMT into a box instead of to another conduit?
No. The 461DC couples tubing to tubing, joining two EMT runs into one continuous raceway. To land EMT on an enclosure or panel you need a set screw connector, which has a threaded hub and locknut on one end instead of a second tubing socket.
7) What is the Crouse-Hinds 461DC made of, and will it hold up in an industrial plant?
Natural die cast zinc, unplated. It gives a rigid, corrosion-resistant body that Crouse-Hinds specifies for commercial, industrial, and residential installs. For a plant environment with washdown or chemical exposure, a steel compression fitting is the tougher choice; the 461DC is for standard dry interior raceway.
How fast can I get the Crouse-Hinds 461DC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Crouse-Hinds 461DC come with a warranty?
Absolutely. The Crouse-Hinds 461DC is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Crouse-Hinds 461DC?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Crouse-Hinds 461DC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!