Crouse-Hinds GASK643 Neoprene ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$16.15
Crouse-Hinds GASK643 Neoprene Replacement Gasket for GRF Enclosures

Crouse-Hinds GASK643 Neoprene Replacement Gasket for GRF Enclosures

(No reviews yet) Write a Review

Model: GASK643

In Stock (leaves warehouse same day if ordered before 3pm ET)

$16.15
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Crouse-Hinds GASK643 Neoprene Replacement Gasket for GRF Enclosures

The Crouse-Hinds GASK643 is a neoprene replacement gasket engineered for use with Crouse-Hinds GRF-series conduit body and device enclosures. Made from durable neoprene material, this gasket is designed to create a reliable seal between mating enclosure surfaces, helping maintain the weathertight integrity of the assembly it is installed on. As a genuine Crouse-Hinds component, the GASK643 is intended as a direct-fit replacement part for maintenance and repair of existing installations using compatible GRF hardware. Electrical contractors and maintenance technicians rely on properly matched replacement gaskets like the GASK643 to restore a compromised seal without the cost or downtime of replacing an entire enclosure assembly, making this a practical stocked spare for facilities that run Crouse-Hinds GRF-series equipment.

Key Features

  • Neoprene Construction: Molded from neoprene material for flexibility and resistance to compression set, supporting a consistent seal at the enclosure joint over repeated service cycles.
  • GRF-Series Compatibility: Sized and shaped to fit Crouse-Hinds GRF-series enclosures as a direct replacement gasket, eliminating guesswork during field repairs.
  • Sealing Function: Positioned between mating surfaces to help block moisture and contaminant intrusion at the joint, supporting the weathertight performance of the enclosure assembly.
  • Genuine Crouse-Hinds Part: Manufactured to Crouse-Hinds specifications for consistent fit and performance when replacing worn, cracked, or compressed gaskets.
  • Maintenance-Ready: Simplifies field repair by allowing technicians to restore the seal on existing GRF enclosures without replacing the entire assembly, reducing material cost and labor time.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Replacement Sealing for GRF-Series Conduit Body Enclosures
  • Maintenance and Repair of Existing Electrical Enclosure Assemblies
  • Industrial and Commercial Electrical Installations
  • Field Service on Crouse-Hinds Hardware
  • Preventive Maintenance Programs for Weathertight Enclosures

Why Crouse-Hinds?

Crouse-Hinds is a recognized manufacturer of electrical enclosure components, and the GASK643 neoprene gasket is built to match the fit and material performance of original GRF-series hardware. Choosing a genuine Crouse-Hinds replacement gasket helps ensure a proper seal and dependable long-term performance for electrical enclosure maintenance, giving facility and maintenance teams confidence that repaired assemblies will continue to meet the weathertight standards of the original installation.

Manufacturer Resources

Product Specs

list_batch:
CRS-20260917
Department:
Electrical
Product Subgroup:
Enclosure Accessories
Product Type:
Enclosure
Product Weight:
0.04 lb
Product Width:
0.09 in
Product Length:
4.56 in
Product Height:
4.56 in
Product Material:
Neoprene
Product Group:
Boxes & Enclosures

Crouse-Hinds GASK643 – Frequently Asked Questions

1) What is the Crouse-Hinds GASK643 gasket used for?
The GASK643 is a neoprene replacement gasket for Crouse-Hinds GRF-series conduit body and device enclosures. It sits between the mating enclosure surfaces to block moisture and contaminant intrusion at the joint, restoring the weathertight seal on an assembly whose original gasket has gone hard, cracked, or taken a compression set.
2) Will the GASK643 fit any Crouse-Hinds enclosure, or only certain ones?
Only GRF-series hardware. The GASK643 is sized and shaped as a direct-fit replacement for Crouse-Hinds GRF-series enclosures, so it is not a general-purpose gasket you can cut in on another series or body style. If the cover you are resealing is not GRF, this is the wrong part.
3) Do I have to replace the whole conduit body if the gasket on my GRF enclosure is shot?
No. That is the point of stocking the GASK643. A technician pulls the cover, replaces the gasket, and the existing GRF assembly goes back into service with its seal restored, which avoids the material cost and downtime of swapping the full enclosure.
4) Is neoprene the right gasket material for an outdoor electrical enclosure?
Neoprene is what Crouse-Hinds specifies here, and the GASK643 is molded from it for flexibility and resistance to compression set, so the joint keeps sealing through repeated cover removals rather than staying flattened after the first service call. That matters on enclosures that get opened for inspection on a maintenance schedule.
5) What part number do I order for a GRF gasket, and is it a genuine Crouse-Hinds part?
Order Crouse-Hinds GASK643. It is a genuine Crouse-Hinds component manufactured to Crouse-Hinds specifications, which is what gets you the original fit and material performance when resealing GRF hardware. There is one model, no size or finish choices to specify.
6) My GRF enclosure cover is leaking - do I replace the gasket or the whole box?
If the enclosure body and cover are sound and only the seal is worn, cracked, or compressed, the Crouse-Hinds GASK643 neoprene gasket restores the weathertight joint without replacing the assembly. If the enclosure itself is damaged, you are into a full replacement unit instead, such as the Hoffman A12124GSC screw-cover gasketed enclosure at 12 inches by 12 inches by 4 inches.
7) Should I keep replacement enclosure gaskets on the shelf for a preventive maintenance program?
If your facility runs Crouse-Hinds GRF-series equipment, yes. The GASK643 is a practical stocked spare: gaskets are the wear item on a weathertight enclosure, and having the matched part on hand means a failed seal found during a PM round gets closed out the same visit instead of waiting on an order.
How fast can I get the Crouse-Hinds GASK643 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Crouse-Hinds GASK643 come with a warranty?
Absolutely. The Crouse-Hinds GASK643 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Crouse-Hinds GASK643?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Crouse-Hinds GASK643 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!