Crouse-Hinds T35CGN Die-Cast A...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$20.97
Crouse-Hinds T35CGN Die-Cast Aluminum Type T Conduit Outlet Body

Crouse-Hinds T35CGN Die-Cast Aluminum Type T Conduit Outlet Body

(No reviews yet) Write a Review

Model: T35CGN

In Stock (leaves warehouse same day if ordered before 3pm ET)

$20.97
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Crouse-Hinds T35CGN Die-Cast Aluminum Type T Conduit Outlet Body

The Crouse-Hinds T35CGN is a 1-Inch Type T conduit outlet body, also known as a Condulet, built from die-cast aluminum for durable performance in exposed conduit runs. This unit comes complete with a cover and neoprene gasket, providing a weather-resistant seal at the access point. The Type T configuration offers a straight-through pull with a side outlet, making it a practical choice where conductors need to be pulled, spliced, or tapped within a conduit system. Its 1-Inch trade size fits directly into standard 1-Inch rigid or IMC conduit runs, and the die-cast aluminum body delivers a lightweight yet rugged enclosure suited for demanding electrical installations.

Key Features

  • Trade Size: 1-Inch hub size for direct installation into 1-Inch rigid or IMC conduit runs.
  • Durable Construction: Die-cast aluminum body resists corrosion and provides long-term mechanical strength in exposed conduit installations.
  • Type T Configuration: Straight-through, side-outlet body style allows for convenient conductor pulling, splicing, and tapping within the conduit run without the need for a separate pull box.
  • Included Cover: Ships complete with a matching cover to close off the outlet body once wiring is complete, keeping the fitting field-ready out of the box.
  • Neoprene Gasket: Integrated neoprene gasket seals between the cover and body to help block moisture and contaminants from entering the conduit system.
  • Condulet Design: Recognized Condulet-style body provides a compact access point for conduit systems where a full pull box would be unnecessary or impractical.
  • Lightweight Yet Rugged: Die-cast aluminum construction keeps installation weight down while still standing up to the mechanical demands of exposed conduit runs in commercial and industrial settings.

Technical Specifications

  • Product Type: Conduit Outlet Body
  • Body Style: Type T Conduit Outlet Body (Condulet)
  • Trade Size: 1-Inch
  • Material: Die-Cast Aluminum
  • Included Components: Cover and Neoprene Gasket

Typical Applications

  • Commercial and Industrial Conduit Systems
  • Exposed Rigid or IMC Conduit Runs
  • Conductor Splicing and Pulling Points
  • New Construction and Conduit System Retrofits
  • Wiring Access Points Requiring a Sealed Cover

Why Crouse-Hinds?

Crouse-Hinds Condulet fittings are a long-standing choice for electrical contractors who need dependable, well-built conduit outlet bodies. The T35CGN's die-cast aluminum construction, complete cover, and neoprene gasket combine to deliver a fitting designed for consistent field performance in exposed conduit installations. Choosing Crouse-Hinds means specifying a conduit body engineered for the practical demands of real-world conduit installations, whether it is a new commercial build-out or a retrofit of an existing raceway system. The 1-Inch Type T configuration keeps the fitting compact while still offering the straight-through, side-outlet access needed for splicing and pulling conductors, and the included gasketed cover means the fitting arrives ready to close out an installation without sourcing additional parts.

Manufacturer Resources

Product Specs

list_batch:
CRS-20260917
Product Type:
Type T Conduit Body
Department:
Electrical
Product Subgroup:
Conduit Bodies & Covers
Product Material:
Copper-free Aluminum
Product Height:
1.9 in
Product Width:
1.74 in
Product Size:
1"
Product Weight:
0.64 lb
Product Length:
6.33 in
Product Group:
Conduit & Raceway

Crouse-Hinds T35CGN – Frequently Asked Questions

1) Will the Crouse-Hinds T35CGN fit 1 inch rigid conduit?
Yes. The T35CGN is a 1 inch trade size Type T conduit body, and its hubs thread directly onto 1 inch rigid or IMC conduit. Threaded hubs only, so it is not intended for EMT unless you adapt with a threaded EMT connector.
2) What does a Type T conduit body do that a Type C or LB won't?
A Type T gives you a straight-through run plus a third opening on the side, so you can pull, splice, or tap conductors at that point. A Type C is a straight inline pull only, and an LB turns the run 90 degrees. If you need a branch off the run or a tap point without setting a pull box, the T is the body to use.
3) Does the T35CGN come with a cover and gasket, or do I order those separately?
Both are included. The T35CGN ships with a matching cover and a neoprene gasket, so you can close the body out the same day it goes up. No separate cover or gasket order needed.
4) Can I use the T35CGN outdoors or in a wet location?
The neoprene gasket seats between cover and body to block moisture and contaminants, which is what makes it suitable for exposed runs. For a wet-location installation, also use threaded rigid or IMC with proper thread engagement at the hubs so the seal is continuous through the fitting.
5) Is a die-cast aluminum conduit body okay in a corrosive or wash-down area?
Die-cast aluminum resists corrosion and is light to hang on exposed runs, which covers most commercial and industrial work. Where it falls short is direct contact with concrete, lime, or strong alkaline chemicals, which attack aluminum. For those spots specify a malleable iron or PVC-coated body instead.
6) Can I splice conductors inside a 1 inch Type T Condulet, or does code require a box?
Splicing is one of the T body's intended uses, and that is why it is built with a removable gasketed cover. Keep in mind conduit body volume limits how many conductors you can splice in it, so for larger splice counts in a 1 inch run you still want a proper junction box.
7) What is the exact part number to order for the Crouse-Hinds 1 inch Type T aluminum body with gasketed cover?
Order Crouse-Hinds T35CGN. The T35 designates the 1 inch Type T body; the CGN suffix is what tells you the cover and neoprene gasket come with it rather than being bought loose.
8) Can I use the T35CGN on an existing raceway, or is it new-construction only?
It works for both. Because it threads into standard 1 inch rigid or IMC, you can cut into an existing exposed run and thread the body in to create a new pull or tap point during a retrofit, same as on a new install.
How fast can I get the Crouse-Hinds T35CGN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Crouse-Hinds T35CGN come with a warranty?
Absolutely. The Crouse-Hinds T35CGN is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Crouse-Hinds T35CGN?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Crouse-Hinds T35CGN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!