You may also like
CU TP 1COND 1HL MOUNT 1/0STR-8
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Group:
- Wire & Cable Management
- Product Type:
- Copper Connectors
- Selling Unit Of Measure:
- each
- Standards:
- UL E9809
- Surface Finishing:
- Tin-Plated
- Type2:
- Mechanical connectors
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Material:
- Copper
Blackburn L125P – Frequently Asked Questions
1) What wire range does the Blackburn L125P lug accept?
The L125P is a single conductor mechanical lug rated for 1/0 stranded through 8 AWG copper, which is the range shown in its catalog designation 1/0STR-8. Anything larger than 1/0 or smaller than 8 AWG needs a different frame size.
2) Can I use the Blackburn L125P on aluminum conductors?
No. The L125P is a copper-bodied connector and is listed for copper conductor only (the CU in its designation). For aluminum or a mixed AL/CU run you need a dual-rated AL9CU connector instead.
3) How does the L125P mount, and how many bolt holes does it have?
One mounting hole, one conductor. It is a single hole lug, so it lands on a single bolt at a panel ground bar, busbar, or equipment pad. If your pad has two holes on a fixed center, a one-hole lug will let the conductor rotate under torque unless the barrel is supported, so a two-hole lug is the better choice there.
4) Is the Blackburn L125P a UL listed connector for an inspected job?
It carries UL file E9809. That is the reference an inspector or spec writer wants to see on a mechanical connector, and it is the number to quote on a submittal for the L125P.
5) Is the Blackburn L125P tin-plated, and does that matter for outdoor or damp locations?
The copper body is tin-plated. Tin plating slows oxidation on the copper and reduces galvanic activity where the lug bolts to a dissimilar-metal pad such as galvanized steel or aluminum enclosure hardware, which is why tinned lugs are the usual pick for wet, damp, and exterior gear.
6) Is the L125P a mechanical set-screw lug or a compression lug?
Mechanical. The conductor is clamped by a set screw rather than crimped, so it installs with a hex key or torque driver and no compression tool or die set. That makes it the practical choice for service work and field terminations where you are not carrying a crimper.
7) Is the Blackburn L125P sold individually or in a bag of multiples?
Sold each. One L125P lug per unit, so order the exact count of terminations you have rather than buying a box.
8) What is the exact part number and country of origin for the Blackburn L125P for my submittal package?
Manufacturer part number L125P, Blackburn brand, made in Mexico. Those are the two lines procurement and government or institutional buyers usually need alongside the UL file number E9809.
How fast can I get the Blackburn L125P delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn L125P come with a warranty?
Absolutely. The Blackburn L125P is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn L125P?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn L125P from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.