You may also like
CU TP 1HL LUG SHRTBRL 1/0 5/16B PNK
Manufacturer Resources
Product Specs
- Cable Size:
- 1/0 AWG
- Country Of Origin:
- Mexico (MX)
- Product Group:
- Wire Termination
- Product Type:
- Standard Barrel
- Selling Unit Of Measure:
- each
- Standards:
- UL E9809
- Stud Size:
- 5/16 in
- Sub Brand Label:
- Blackburn
- Type2:
- Cable or wire lug
- Department:
- Electrical
- Product Subgroup:
- Lugs
- Product Color:
- Pink
- Product Material:
- Copper
Blackburn CTL10-516 – Frequently Asked Questions
1) What wire size does the Blackburn CTL10-516 lug take?
The CTL10-516 is sized for 1/0 AWG conductor. It's a one-hole compression lug with a short barrel, so the conductor has to be 1/0 to get a proper crimp; going up or down a size means a different lug and a different die.
2) Is the CTL10-516 copper or aluminum, and can I use it on aluminum conductor?
It's a copper lug, intended for copper conductor. For aluminum or dual-rated runs you want an AL9CU-marked connector instead, not this one.
3) What does the pink color code on this Blackburn lug mean?
Pink identifies the crimp die and color code for this barrel size. Blackburn colors the barrel so an inspector or the next electrician can confirm the right die index was used on a 1/0 copper termination, matching the pink die in the crimp tool.
4) Do I need a compression tool for the CTL10-516, or can I tighten it with a wrench?
It's a compression barrel, not a mechanical set screw lug. You crimp it with a hydraulic or battery crimper using the pink die index for 1/0 copper. If you want a lug you can install with just a hex key, look for a mechanical set screw lug instead.
5) Is the Blackburn CTL10-516 sold individually or in a bag of ten?
Priced and sold each, so you order the exact count for the job. Count one per conductor termination, which usually means ordering in multiples that cover all phases plus neutral and ground.
6) What is the exact part number and country of origin for this Blackburn lug, for a submittal?
Manufacturer part number CTL10-516, Blackburn brand, made in Mexico. Spec it as a 1/0 AWG copper one-hole short barrel compression lug with a 5/16 inch stud hole, UL E9809.
How fast can I get the Blackburn CTL10-516 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn CTL10-516 come with a warranty?
Absolutely. The Blackburn CTL10-516 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn CTL10-516?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn CTL10-516 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.