Delaney 3" Handrail Bracket

Mounting hardware is included with the Delaney 3" handrail bracket, so the bracket ships ready to fasten. Anchors suited to your substrate are a separate call, since the included hardware is what the manufacturer packs for the bracket itself, not a masonry or hollow-wall anchor kit.

The closest peer is the Orca Hardware 10ST Series handrail bracket, a standard-duty handrail bracket in the same part class. The Delaney 3 inch bracket is die cast zinc with overall dimensions of 1-3/16 inch by 3 inch by 3 inch and ships with its mounting hardware, and it is offered in 605 bright brass, 625 bright chrome, 619 satin nickel, US15A antique nickel and 613 satin bronze oil-rubbed. If a rail run is being matched to existing brass or nickel hardware in a corridor or stairwell, the finish range is the practical deciding factor; if the finish does not need to match, the 10ST covers the same mounting job.

Look at the Orca Hardware 10HD Series, which is built as a heavy duty handrail bracket. The Delaney 3 inch bracket is die cast zinc at 1-3/16 inch by 3 inch by 3 inch, sized for residential and light commercial rail runs in apartments, offices and common corridors. On a high traffic egress stair, a multi-family turnover unit block, or anywhere the rail takes leaning loads all day, the 10HD is the heavy duty version of the same bracket function. Bracket spacing along the rail is still set by the stair rail code that governs the building, not by the bracket choice.

Die cast zinc. That is a solid cast body rather than a formed sheet part, which is why zinc brackets are the common pick for interior stair and corridor rails in apartment buildings and offices. For exterior or wet locations, a cast zinc bracket with a plated decorative finish is not the right choice.

Five finishes: 605 bright brass, 625 bright chrome, 619 satin nickel, US15A antique nickel, and 613 satin bronze oil-rubbed. Those are BHMA finish codes, so if the levers and hinges on the job were specified as 626 or 619, you can line the brackets up against the same code instead of matching by eye. There is no 626 satin chrome in the Delaney 3" bracket range, so a 626 job pairs closest with 625 bright chrome or 619 satin nickel.

Orca Hardware makes a heavy duty version, the 10HD Series HD handrail bracket, and a round base variant in the 10XL Series. Orca also lists a standard duty bracket, the 10ST Series. The Delaney 3" bracket is a die cast zinc bracket sold in five decorative finishes, so where a job is driven by appearance and finish matching it stays the closer fit; where the rail is carrying institutional traffic, the Orca HD or XL is the direction to look.

Yes. The Orca Hardware 10XL Series is a heavy duty handrail bracket with a round base, so the wall plate reads as a circle rather than the squared 3 inch by 3 inch footprint of the Delaney 3 inch bracket. The base shape matters on two counts for a remodeler or property manager: a round base covers a different patch of wall than a square one, so it will not always hide the paint shadow or anchor holes left by a bracket coming off, and it changes how the bracket reads against square-plate hardware already in the space. Both are wall mounted handrail brackets and both do the same structural job.

Each finish of the Delaney 3" bracket is ordered as its own item, so a stair run is built by ordering the quantity of brackets your rail layout needs. Count your bracket spacing off the rail length first, then order that count in one finish rather than assuming a run comes packaged.

Structurally you can fasten different brackets to the same wall, but they will not read as a set. The Delaney 3" bracket is offered in five decorative finishes including 613 oil-rubbed bronze and US15A antique nickel, and the Orca 10ST, 10HD and 10XL brackets are separate designs with their own bases, including a round base on the 10XL. On a visible run, pick one bracket and hold it the length of the rail.

Both are handrail brackets that mount a rail to the wall, and both are peers to the Delaney 3 inch die cast zinc bracket. The 10ST Series is Orca's standard handrail bracket; the 10HD Series is the heavy duty one, and the 10XL Series is a heavy duty bracket with a round base. For a distributor or MRO buyer standardizing a stock list, that is the axis to sort on: duty level first, then base shape, then finish. The Delaney bracket answers the finish side of that list with 605 bright brass, 625 bright chrome, 619 satin nickel, US15A antique nickel and 613 satin bronze oil-rubbed, and it arrives with mounting hardware so no separate fastener line is needed.