Delaney 3" Jumbo Spring Door Stop

The Delaney Jumbo Spring Door Stop measures 3-1/8 inches long, so it holds the door about three inches off the wall once the spring compresses against the tip. That is enough clearance for most lever trim and thumbturns. If your lever projects further than that from the door face, measure it first, a spring stop only protects the wall out to its own length.

A spring stop flexes on impact, which is more forgiving on the door face and on light wall construction, and it is the usual choice on residential and multi-family interior doors. A rigid wall bumper such as the Emtek 2255 brass wall bumper with rosette sits tighter to the wall and gives a cleaner look on a finished opening. If the door needs to be held open rather than just stopped, neither works, you want a wall holder like the Ives WS20 manual holder with hinged strike or the WS40 automatic holder.

The Delaney jumbo spring stop is a fixed 3-1/8 inch length, there is no longer version of it. When the gap between the door and the wall is bigger, go to a stop offered in multiple lengths, the ABH RM Series and RMS Series wall door stops both come with length options. Alternatively, if the wall is not where the door lands, a floor-mounted or hinge-pin stop is the better solution.

No. It is a bumper only, it stops the door and springs back. Nothing about it catches or latches. For hold-open you need a wall holder with a strike, such as the Ives WS20 manual holder with hinged strike, or the Ives WS40 automatic wall holder.

The Delaney Jumbo Spring Door Stop is a spring style wall stop with a zinc base, 3-1/8 inches long with a 1 inch base diameter. For openings where a rigid wall stop is preferred over a spring, the Ives WS11 is a heavy duty wall stop with a replaceable rubber bumper, rated for drywall and masonry. The Ives WS33/WS33X is also a heavy duty wall door stop with a replaceable rubber bumper. The replaceable bumper is the practical difference for a property manager standardizing across many doors: the strike face can be renewed without pulling the stop off the wall.

The Delaney Jumbo Spring Door Stop is a single 3-1/8 inch length with a 1 inch base diameter. When the gap between the wall and the door face calls for a different projection, the ABH RM Series wall door stops and the ABH RMS Series wall door stops are both offered with multiple length options. Measuring from the finished wall to the point on the door the stop will contact, before ordering, is what decides between a fixed length spring stop and a multi length series.

The spring stop's 1 inch zinc base is sized for a single fastener into a wood baseboard or stud, so on block or concrete you would be supplying your own masonry anchor. Stops that are packaged for both substrates are a cleaner answer there, the Ives WS11 and WS33 wall stops are both offered for drywall and masonry.

Base metal is zinc, with a spring shaft and a rubber tip. Zinc-base spring stops are standard residential and light-commercial duty, fine for apartment interior doors, closets, and bedrooms across a portfolio. For a high-traffic commercial opening where the door gets thrown open all day, a rigid heavy-duty wall stop like the Ives WS11 or WS33 takes that abuse better than a spring.

Seven finishes: 605 Bright Brass, 609 Antique Brass, 613 Satin Bronze Oil-Rubbed, 619 Satin Nickel, 622 Matte Black, 625 Bright Chrome, and US15A Antique Nickel. Those are the common BHMA finish codes, so if your levers and hinges are already specified by number you can match straight across.

The Delaney is a spring door stop with a zinc base, 3-1/8 inches long, 1 inch base diameter, offered in finishes including 605 Bright Brass, 613 Satin Bronze Oil-Rubbed, 619 Satin Nickel, 622 Matte Black, and 625 Bright Chrome. The Emtek 2255 is a brass wall bumper with a regular rosette, so it is a rigid bumper on a rosette trim plate rather than a flexible spring shaft. For a designer or property manager matching decorative trim already on the wall, the rosette style of the Emtek is the deciding detail; for an opening that needs the door decelerated on a longer travel, the spring shaft is.

The Ives WS11 and the Ives WS33/WS33X are both heavy duty wall door stops specified for drywall and masonry, and the Ives WS20 manual wall holder is likewise offered for drywall and masonry applications. The Delaney Jumbo Spring Door Stop is a zinc base spring stop 3-1/8 inches long with a 1 inch base diameter, mounting on the same wall face. Where the substrate is block or brick, the Ives units are the ones whose descriptions carry the masonry application; the anchor selected for the wall type carries the impact load either way.

Black. The US10B (oil-rubbed bronze), US15A (antique nickel), and US19 finishes ship with a black tip. The brighter finishes get the standard light tip, so if you are trying to keep the stop visually quiet against a dark baseboard, those three are the ones that disappear.

On a light interior door, yes, the spring absorbs the return. But a spring stop is not the part that limits the swing on a closer-equipped commercial door, that is the closer's own backcheck or stop arm. Use the Delaney spring stop to protect the wall, not to take the full force of a closer at speed. Heavy openings call for a rigid heavy-duty wall stop instead, the Ives WS11 and WS33 are both heavy duty.