You may also like
Deltana SP7FBR Strike Plate for 7" Flush Bolt, 1-1/2" x 5/8", Solid Brass
Model: DEL-SP7FBR
Deltana SP7FBR Strike Plate for 7" Flush Bolt
The Deltana SP7FBR is a solid brass replacement strike plate sized for Deltana 7" flush bolts (7FBR series). At 1-1/2" x 5/8", it installs directly into...
Deltana
Starting at
$5.30
$3.15
Delaney Strike Plate for Mortise in Flush Bolt
- Strike Plate for Flush Bolt
- Dimensions: 1-1/2" x 5/8"
Manufacturer Resources
Product Specs
- Subcategory:
- Flush Bolts
- Series:
- Flush Bolt Strikes
- Product Group:
- Door Trim and Accessories
- Product Subgroup:
- Flush Bolts
- Product Type:
- Strike
- Product Dimension:
- 1 1/2" x 5/8"
- Product Category:
- Door Trim and Accessories
- Product Substrate:
- Zinc
- Department:
- Door Hardware
Delaney Hardware 481401 – Frequently Asked Questions
1) What is the Delaney 1-1/2" x 5/8" strike plate for, and does it come with the flush bolt?
It's the mortised strike that receives the bolt of a flush bolt, cut into the head jamb, the threshold, or the edge of the inactive leaf depending on where the bolt throws. The plate is the receiving side only, sold on its own, so it's what you order when the bolt is fine but the strike is chewed up, painted over, or missing after a door swap. Face size is 1-1/2 by 5/8 inches.
2) Will a 1-1/2 x 5/8 inch flush bolt strike drop into my existing mortise?
Only if your old strike measures the same. Pull the existing plate and measure the mortise face: this Delaney strike is 1-1/2 by 5/8 inches, so a pocket cut for a wider or longer plate will leave a gap you have to fill, and a smaller pocket needs chiseling out. On a pair of doors, check the head strike and the floor or threshold strike separately, since they are not always the same size.
3) Does this flush bolt strike plate have a handing?
No handing. The Delaney flush bolt strike is a symmetrical mortised plate at 1-1/2 by 5/8 inches, so the same part works on a left or right hand inactive leaf and at the head or the sill. Finish is the only thing you pick.
4) What finishes does the Delaney flush bolt strike come in, and will it match my existing hardware?
Two: 613 Satin Bronze Oil-Rubbed and 619 Satin Nickel. Those are BHMA finish numbers, so if the flush bolts and hinges already on the opening are marked 613 or 619 you have a direct match without eyeballing it. If your existing hardware is a different number, the plate will read off against it.
5) I'm standardizing a building's double doors, how many strike plates do I need per pair?
Count bolts, not doors. A pair with top and bottom flush bolts on the inactive leaf needs two of these 1-1/2 by 5/8 inch strikes per pair, one at the head and one at the floor or threshold. A single top-bolt opening needs one. Order the same finish, 613 or 619, across the building so the openings read the same.
6) What is the Delaney flush bolt strike plate made of, and will it hold up in an exterior door bottom?
Zinc. That's fine for a head jamb or an interior sill, and it's the usual material for a small mortised strike, but a zinc plate set into a threshold at an exterior pair takes standing water and grit every cycle, so expect the finish to wear there before it wears at the head.
7) Do I need a strike plate at the bottom bolt, or can the bolt just drop into a hole in the floor?
Use the plate. A bare hole drilled in concrete or a wood threshold rounds out and packs with debris, and the bolt starts missing. The mortised strike gives the bolt a fixed zinc throat at a consistent 1-1/2 by 5/8 inch opening in the floor so it keeps registering after the door settles.
How fast can I get the Delaney Hardware 481401 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Delaney Hardware 481401 come with a warranty?
Absolutely. The Delaney Hardware 481401 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Delaney Hardware 481401?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Delaney Hardware 481401 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.