You may also like
Tiara Sandcast Entrance Knobset
Single Cylinder Keyed Entry: Single cylinder keyed entry door hardware is locked and unlocked from the exterior using a key and can be locked and unlocked from the interior using the locking mechanism. Perfect for securing entrances, side doors, and anywhere else that needs a bit more security.
Features:
- BHMA grade 3 certified security
- Constructed of high quality brass for lasting durability
- Installs easily with all necessary mounting hardware included
- Covered by a limited lifetime warranty
Specifications:
- Backset: Adjustable 2-3/8" or 2-3/4"
- Cross Bore: 2-1/8"
- Edge Bore: 1"
- Door Thickness: 1-3/8" to 1-3/4"
- Handing: Left or Right
- Handle Length: 4-3/4"
- Handle Projection: 2-7/8"
- Trim Height: 4-1/4"
- Trim Width: 2-11/16"
- Product Weight: 5 lb.
- Latch Faceplate: Round Corner
- Cylinder: 6 Pin Schlage C
Manufacturer Resources
Product Specs
- Subcategory:
- Bored Locksets
- Series:
- Sandcast Levers
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Commercial/Residential:
- Residential
- Lock Function:
- Entrance
- Product Type:
- Leverset
- Grade:
- Grade 2
- Product Attribute:
- Cylindrical Locks
- Product Function:
- Entrance
- Product Category:
- Mechanical Locks
- Department:
- Door Hardware
Delaney Hardware 691600S – Frequently Asked Questions
1) Will the Delaney Tiara sandcast entrance leverset fit a 1-3/8 inch door, or does it need a 1-3/4?
Both. The Tiara entrance leverset covers 1-3/8 inch through 1-3/4 inch doors, which takes in standard residential interior and exterior slabs without a spacer kit. The backset adjusts between 2-3/8 and 2-3/4 inches, so it lands on either of the two bores a residential door is normally drilled for.
2) Can I drop a Delaney Tiara entrance lever into the holes my old knob left behind?
In most cases yes. The Tiara uses a 2-1/8 inch cross bore and a 1 inch edge bore, which is the standard bored-lock prep in North American doors, so an existing knob or lever hole takes it directly. Measure the backset first: if your old latch measures 2-3/8 or 2-3/4 inches from door edge to bore center, the adjustable latch covers it. The trim rose is 4-1/4 by 2-11/16 inches, which is what has to cover any scarring around the old bore.
3) Does the Delaney Tiara lever key into my existing Schlage keys?
It can. The Tiara entrance lever uses a 6-pin Schlage C cylinder as standard, and the keyway is chosen at order: SC4 6-pin standard, SC1 5-pin, or KW1 5-pin. Pick SC1 or SC4 to run on Schlage-keyed doors, KW1 to run on Kwikset-keyed doors. If you want it to open with the same key as other doors, choose Keyed Alike rather than Keyed Different when you order.
4) Is the Delaney Tiara entrance leverset rated for a commercial opening or an apartment turnover?
It's a residential-duty lock. Delaney rates the Tiara as Grade 2, and it's built for houses and residential units rather than commercial traffic. For a leased unit door or a house entry it's appropriate. For a high-cycle commercial opening, look at a commercial-grade cylindrical lever instead: the Cal-Royal INDLEV-20 is a commercial-grade leverset we carry, though it's a privacy indicator function rather than keyed entry.
5) What does entrance function mean on the Delaney Tiara lever, and is it the right one for a front door?
Entrance function here is single cylinder keyed entry: key from outside, thumb-latch or button locking from inside. That's the right function for a front door, side door, or unit entry. It's not the function for a bathroom or bedroom, which wants a privacy lock with no key outside. If you need an occupancy privacy lock instead, the Cal-Royal INDLEV-20 is a privacy leverset with a red/green indicator.
6) Do I have to specify handing when ordering a Delaney Tiara sandcast leverset?
No. The Tiara is handed left or right in the field, so one part number serves either swing. Nothing to declare on the order, and nothing to return if you measured the swing wrong.
7) How far does the Delaney Tiara lever stick out from the door, and will it clear a storm door or a narrow hallway?
Projection is 2-7/8 inches off the face of the door and the lever itself is 4-3/4 inches long. That's the number to check against a storm door closing over it, a jamb-side wall return, or a cabinet edge in a tight hall. Trim footprint on the door face is 4-1/4 by 2-11/16 inches.
8) Will the Delaney Tiara latch drop into my existing round-corner strike prep?
The Tiara ships with a round corner latch faceplate, so it seats in a door edge already routed for a round corner latch, which is the common residential prep. If your existing latch has a square corner faceplate, the mortise in the edge won't match without recutting the corners.
9) I'm doing eight units and want one key to open all of them. How do I order the Delaney Tiara that way?
Choose Keyed Alike on the Keying option and order all eight on the same keyway, either SC4 6-pin, SC1 5-pin, or KW1 5-pin. Every lock in the group then runs on one key. Keyed Different is the option to pick if each unit needs its own key. Keying is a required selection, so it gets decided at order time, not after delivery.
10) What finishes does the Delaney Tiara sandcast entrance lever come in, and will it match my other dark hardware?
Two finishes: ABR Aged Bronze and ABK Aged Black. Both are dark, aged sandcast looks rather than a bright plated finish, so they sit with wrought-iron style hinges and pulls. If your other openings are polished brass or satin nickel, the Tiara will not match them.
How fast can I get the Delaney Hardware 691600S delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Delaney Hardware 691600S come with a warranty?
Absolutely. The Delaney Hardware 691600S is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Delaney Hardware 691600S?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Delaney Hardware 691600S from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.