Deltana 7FBR 7" Flush Bolt, He...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$32.20
$19.16
Deltana 7FBR 7" Flush Bolt Heavy-Duty Round Solid Brass - Polished Brass finish, shown with strike plate

Deltana 7FBR 7" Flush Bolt, Heavy-Duty, Round, Solid Brass

(No reviews yet) Write a Review

Model: 7FBR3
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$32.20
$19.16
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Deltana 7FBR 7" Heavy-Duty Flush Bolt, Round Corner, Solid Brass

The Deltana 7FBR is a heavy-duty flush bolt for double-door applications where one door must be held inactive. The bolt installs flush into the door edge for a clean, recessed profile and is constructed from solid brass throughout.

Specifications

  • Length: 7"
  • Corners: Round
  • Bolt Throw: 1"
  • Material: Solid Brass
  • Installation: Recessed (flush mount)
  • Application: Double doors, inactive leaf
  • Packed with: #6 x 3/4" screws (1 flush bolt per unit)

Finish Options

Available in 9 finishes: Polished Brass, Antique Brass, Oil Rubbed Bronze, Brushed Nickel, Antique Nickel, Paint Black, Polished Chrome, Brushed Chrome, and PVD Polished Brass.

Manufacturer Resources

Spec Sheet

Manufacturer Resources

Product Specs

Subcategory:
Flush Bolts and Coordinators
Product Group:
Door Trim and Accessories
Product Type:
Flush Bolts
Product Subgroup:
Flush Bolts
Commercial/Residential:
Commercial
Product Options:
Heavy-Duty
MAP Policy:
Yes
Product Model:
7FBR
Product Size:
7"
Product Material:
Brass
Product Category:
Door Trim & Accessories
Product Substrate:
Brass
Department:
Door Hardware

Deltana 7FBR3 – Frequently Asked Questions

1) How much door edge do I need to mortise in a 7 inch Deltana flush bolt?
Plan the pocket around a 7 inch bolt body, with the faceplate running the full 7 inches down the door edge. The bolt itself throws 1 inch past the faceplate into the strike, so you also need clear strike prep in the head jamb or threshold at that depth. Rounded faceplate corners, so the router radius matches without squaring the ends by hand.
2) Manual flush bolt or automatic flush bolt, which do I need for my double doors?
Manual, like the Deltana 7FBR, means someone slides the bolt by hand to secure the inactive leaf, and slides it back to open that leaf. That's right where the second leaf stays shut except for moving furniture or equipment. Automatic bolts throw themselves when the inactive leaf closes, so nobody has to remember; that's what you want on a pair the public uses or where egress code drives the hardware. ZenSupply carries automatic sets including the Ives FB41 for wood doors and the ABH 1860P/1862P pair.
3) Can I swap a Deltana 7FBR into an existing 6 inch flush bolt cutout?
Not without recutting. The 7FBR faceplate runs 7 inches, so it will not sit in a 6 inch pocket without lengthening the mortise. Going the other way, a 7 inch plate will cover a shorter old cut. If you need a true 6 inch replacement, ZenSupply stocks the Delaney 4108 6 inch square end solid brass flush bolt, the Orca 6 inch flush bolt with radius corners, and the Trimco 3999 6 inch corner mount rounded end.
4) Will a 1 inch throw flush bolt reach my strike in the head jamb?
One inch of throw is on the deep end for a slide-type flush bolt, which gives you room over a thick threshold or a head jamb with a gap. For comparison from other bolts ZenSupply carries, the Ives FB358 and the ABH 1855S both throw 3/4 inch, and the International Door Closers FB-1202 throws 5/8 inch. So if a shallow bolt has been dropping out of engagement at the top of your pair, the extra reach on the Deltana is what closes that gap.
5) The Deltana 7FBR is a manual flush bolt - what do I use if the inactive leaf has to release automatically?
The Deltana 7FBR is operated by hand at the door edge to hold the inactive leaf of a pair. For automatic release, the Ives FB41 is an automatic flush bolt set for wood doors with a 3/4 inch throw and a 90 minute fire rating, and the ABH 1860P/1862P is an automatic flush bolt pair that is fire rated 3-hour with a thermal lock. Automatic bolts retract when the active leaf closes, so the inactive leaf frees itself rather than being thrown manually.
6) The plans call for a fire rated pair - is a manual brass flush bolt like the Deltana 7FBR what I need there?
The Deltana 7FBR is a heavy-duty solid brass manual flush bolt for holding the inactive leaf of a double door. For a fire rated pair, the comparable set carries the ABH 1860P/1862P automatic flush bolt pair rated 3-hour with a thermal lock, the Ives FB41 automatic flush bolt set for wood doors rated 90 minutes, the Ives FB42 top automatic flush bolt for wood doors with an auxiliary fire latch, and the ABH 1858 universal bottom fire bolt. Fire rated openings are specified on the label and the assembly, so match the bolt to the rating on the door.
7) My opening is a pair of hollow metal doors - is the Deltana 7FBR the right flush bolt?
The Deltana 7FBR is a solid brass heavy-duty flush bolt with a 1 inch throw. Where the pair is metal, the ABH 1855S is a manual flush bolt single for metal doors with a 3/4 inch throw, the ABH 1854 is a manual flush bolt set with fire bolt for metal doors, and the Ives FB457 is a manual flush bolt with a 12 inch rod length for metal doors. Those three are prepped for metal door construction, which differs from a wood door mortise.
8) What is the closest equivalent to the Deltana 7FBR flush bolt with rounded corners in a 6 inch length?
The Trimco 3999 is a 6 inch corner mount flushbolt with a rounded end, and the Orca Hardware 86SQ is a 6 inch flush bolt with radius corners. Both carry the same rounded corner profile as the Deltana 7FBR, which is a 7 inch heavy-duty flush bolt with round corners in solid brass. Where a 6 inch mortise pocket is already cut into the inactive leaf, either of those two matches the corner shape without lengthening the prep.
9) Round end or square end flush bolt, which one do I order?
Match the faceplate to the router bit or the prep already in the door. The Deltana 7FBR has rounded corners, which drops straight into a routed pocket cut with a standard bit and no corner chiseling. If your existing prep has square corners, a square-end plate is the cleaner swap, and ZenSupply carries the Trimco 3999SE in a 6 inch corner mount square end for that. Trimco's 3999 is the rounded-end version of the same 6 inch plate.
10) What comes in the box with the Deltana 7FBR, and do I need a strike?
Each unit ships with one flush bolt and #6 x 3/4 inch mounting screws. A strike plate is shown with the bolt in Deltana's product photography. Nothing else is included, so the door prep, and any dust proof strike you want set into a concrete or tile floor for a bottom bolt, is on you.
11) Does the Deltana 7FBR flush bolt come in a finish that matches oil rubbed bronze hinges and levers?
Nine finishes on the 7FBR: Polished Brass, Antique Brass, Oil Rubbed Bronze, Brushed Nickel, Antique Nickel, Paint Black, Polished Chrome, Brushed Chrome, and PVD Polished Brass. Oil Rubbed Bronze is a living finish that will darken and wear at contact points, which is normal for the look. If you want brass tone that holds without polishing, the PVD Polished Brass has a coated finish instead of raw lacquered brass.
12) Is a solid brass flush bolt strong enough for a commercial entrance?
The 7FBR is built solid brass throughout and Deltana designates it heavy-duty, and it is catalogued for commercial use rather than residential only. Brass will not rust, which matters on an exterior pair or a bottom bolt near a wet threshold. For high-traffic openings where a bolt gets thrown dozens of times a day, note this is a manual bolt: someone has to reach up and set it, so it suits a leaf that stays inactive most of the time rather than one opened all day.
13) Do I need a key-operated flush bolt instead of a slide bolt?
A slide bolt like the Deltana 7FBR is thrown by hand from the door edge, which means it can only be operated with the active leaf open. If you need the inactive leaf locked and unlocked with a key from the face of the door, that's a different product: ZenSupply carries the Adams Rite 1870 Series cylinder-operated flushbolt with key control, and the 1877 cylinder-operated flushbolt for paired wood doors.
14) Is the Deltana 7FBR handed? Do I order left and right?
No handing to specify. The 7FBR is offered by size and finish only, and a flush bolt mortises into the door edge and throws straight up or down rather than toward a hand. The same part works top or bottom on either leaf. All you pick is the finish.
15) How many Deltana 7FBR flush bolts do I need per pair of doors?
Two per pair in the usual setup, one at the top and one at the bottom of the inactive leaf, because each 7FBR unit is a single bolt with its screws, not a top-and-bottom set. If you only need the leaf held at the head, one does it. Buy both in the same finish so the pair matches, since all nine finishes are ordered per bolt.
16) What flush bolt gives me more throw than the Deltana 7FBR, and which give less?
The Deltana 7FBR throws 1 inch. Among the manual bolts, the Ives FB358 throws 3/4 inch with a 1/2 inch bolt diameter, the ABH 1855S throws 3/4 inch, and the International Door Closers FB-1202 throws 5/8 inch with a 1/8 inch offset and 7/8 inch backset. Throw determines how deep the bolt sits into the header strike or floor strike, which matters when the frame reveal or threshold clearance is larger than usual.
17) Does one Deltana 7FBR secure the inactive leaf top and bottom, or do I need two?
The Deltana 7FBR is packed one flush bolt per unit, so a top and bottom installation on the inactive leaf takes two. Peers that come as a matched two-point assembly include the Adams Rite MS1880/MS1881 two-point flushbolts with an interlock mechanism and the Adams Rite MS2180 auto-release two-point flushbolt with a Smartlock mechanism, and the ABH 1860P/1862P is supplied as an automatic flush bolt pair.
18) What other 7 inch flush bolts are there besides the Deltana 7FBR?
The Delaney 4101 is a 7 inch slide type mortise-in flush bolt and the Delaney 4363 is a 7 inch mortise extension flush bolt, both matching the 7 inch size of the Deltana 7FBR. The Deltana unit is solid brass throughout with a 1 inch throw and round corners, so confirm the corner shape of the existing pocket before treating any of the three as a drop-in for one another.
19) Which flush bolt should I use if the doors are offset or need a specific backset at the edge?
The International Door Closers FB-1202 is a flush bolt with a positive U joint actuator, a 5/8 inch throw, and a 1/8 inch offset with 7/8 inch backset, square end, supplied with a guide. The Deltana 7FBR is a recessed flush mount unit with round corners and a 1 inch throw. Where the pair has an offset edge condition and a defined backset to hit, the FB-1202 states those dimensions directly.
20) I'm standardizing flush bolt finishes across a building, does Deltana cover both brass and chrome tones?
Nine finishes on the 7FBR span the usual specification tones: warm brass as Polished Brass, Antique Brass, and PVD Polished Brass; bright and satin white metals as Polished Chrome, Brushed Chrome, Brushed Nickel, and Antique Nickel; plus Oil Rubbed Bronze and Paint Black. That's enough range to match one bolt across mixed openings in a portfolio without changing manufacturer, and the base part is the same solid brass 7 inch body in every one.
21) Is a decorative brass flush bolt from another brand the same thing as the Deltana 7FBR?
Emtek Flush Bolts are a separate flush bolt line and are not a like-for-like swap by name alone. The Deltana 7FBR is defined by a specific set of dimensions - 7 inch body, round corners, 1 inch throw, solid brass, recessed flush mount - and a substitute has to match the mortise length, corner shape, and strike location, not just the material and finish family. Two brass flush bolts in the same finish can still need different preps.
How fast can I get the Deltana 7FBR3 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Deltana 7FBR3 come with a warranty?
Absolutely. The Deltana 7FBR3 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Deltana 7FBR3?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Deltana 7FBR3 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!