Deltana AN138 Contemporary Knob, Anvil, 3/4" x 1-1/2" x 7/8"

The AN138 measures 3/4 x 1-1/2 x 7/8 inches, with a 7/8 inch projection off the face. That gives you roughly 7/8 inch of finger clearance, which is enough to grip comfortably without the knob crowding an adjacent door or a drawer in a tight bank of cabinets.

No. The AN138 has two locator pins on the back that seat into the door or drawer face and stop the knob rotating on its screw. You do need to drill for those pins, not just the single through hole, so mark and bore the pin locations when you set out the job. On a soft wood face they bite in cleanly; on a laminate or MDF front, pilot them.

It is a knob, so it mounts on a single screw hole rather than a center to center spread. If you are replacing a two-hole pull you will have a spare hole to fill or a backplate to cover it. For a genuine two-hole layout, look at a knob published with a center to center dimension, such as the Schaub 10030 Cafe modern oval slot knob at 1 inch diameter with 7/8 inch center to center.

The Deltana AN138 is a solid brass cabinet knob measuring 3/4" x 1-1/2" x 7/8". For another solid brass cabinet knob, the Delaney Solid Brass Cabinet Knob (DLY-43701x) sits in Delaney's Cabinet Knobs series, and Schaub offers two solid brass options in the Cafe Collection: the 10040 Modern Oval knob at 1" diameter with 7/8" center to center, and the 10030 Cafe Modern Oval Slot knob at the same 1" diameter and 7/8" center to center. The Schaub pair are oval profiles rather than the anvil shape of the AN138.

The AN138 is a compact knob at 3/4" x 1-1/2" x 7/8" with a 7/8" projection, intended for small furniture. If you want a larger face, the Schaub 131 Artifex is a round cabinet knob at 1-1/2" diameter in Britannium. The Schaub 10030 and 10040 Cafe knobs are both 1" diameter. Going the other direction, the Schaub 1200 Modo is a 16 mm knob in zinc and aluminum construction.

Treat them as different parts rather than a drop-in swap. The Deltana AN138 is a 3/4" x 1-1/2" x 7/8" knob with two locator pins to prevent rotation, so the door or drawer front needs the matching pin holes in addition to the screw hole. The Schaub 10030 Cafe Modern Oval Slot knob is a 1" diameter solid brass knob with 7/8" center to center, meaning it mounts on two fasteners. Verify the existing drilling before ordering either.

Nine finishes: PVD polished brass, brushed brass, antique brass, oil rubbed bronze, polished nickel, brushed nickel, polished chrome, brushed chrome, and paint black. The PVD polished brass is worth noting for a rental or hospitality job, since PVD resists tarnish and handling marks better than a lacquered brass.

Deltana classes the AN138 as residential. For apartment kitchens, bathroom vanities, and light furniture it is the right kind of part, and its small 3/4 inch body suits small drawers and narrow stiles. For high-traffic institutional casework, specify hardware rated for that duty instead.

Staying in solid brass, the Schaub 10040 Cafe Collection modern oval knob runs 1 inch diameter with 7/8 inch center to center, and the Delaney solid brass cabinet knob is another brass option. If you want a heavier traditional profile, the Schaub 131 Artifex round knob is 1-1/2 inch diameter in Britannium. For a smaller, more minimal knob than the AN138, the Schaub 1200 Modo is 16 mm in zinc and aluminum rather than brass.

The AN138 is a contemporary anvil-shaped knob. For period-leaning cabinet knobs, Emtek's Schaub Collection includes the Art Deco Cabinet Knob, the Allerton Cabinet Knob, and the Astoria Glass Cabinet Knob, all cataloged as cabinet knob/pull function. Orca's CK-18032 Mission Round knob is another traditional-styled option.

The Deltana AN138 is designated residential. If you are specifying across a commercial casework package, the Orca Hardware CK-18032 Mission Round and CK-19032 Whistler cabinet knobs and the Emtek SELECT 8665 cabinet knob are alternate cabinet knob lines to evaluate against your project requirements.

Each. The price you see is for one knob, so count your doors and drawer fronts and order that quantity plus a few spares if you are matching a finish across a whole unit later.