You may also like
Deltana DASHCP Solid Brass Cover Plate for Deltana DASH95 Double Action Spring Hinge
Model: DEL-DASHCP
Solid Brass Cover Plate for DASH95An installation accessory for the DASH95. It comes in a variety of fine Finishes.U/M (Unit of Measure): each - (Price displayed is per unit)Material: Solid...
Deltana
Starting at
$36.50
$27.01
Deltana JB-DASH95 Solid Jamb Bracket for DASH95 Double Action Spring Hinge
Model: DEL-JB-DASH95
Solid Brass Jamb Bracket for DASH95An installation accessory for the DASH95. It comes in a variety of fine Finishes.U/M (Unit of Measure): each - (Price displayed is per unit)Material: Solid...
Deltana
$29.10
$21.83
Deltana DASHBP Back Plate for Deltana DASH95 Double Action Spring Hinge
Model: DEL-DASHBP
Back Plate for DASH95An installation accessory for the DASH95. It comes in a variety of fine Finishes.U/M (Unit of Measure): each - (Price displayed is per unit)Material: SteelManufacturer Resources:
Deltana
$6.60
$4.95
Deltana CPC4764 Switch Plate, Cable Cover Plate, Solid Brass
Model: DEL-CPC4764
Switch Plate, Cable Cover PlateDeltana Switch and Plug Plates are offered in a wide variety of templates to suit your needs. They are available in an array of fine finishes.U/M (Unit of Measure):...
Deltana
Starting at
$20.10
$15.08
Deltana DASH95 Double Action Spring Hinge with Solid Brass Cover Plates
The DASH95 is a floor-mounted, self-closing spring hinge that swings in both directions. Solid brass cover plates and trim are included. A hold-open feature engages at approximately 90 degrees. Universal handing fits left- and right-hand doors without modification.
Specifications
- Door Thickness: 1-3/8"
- Maximum Load: 90 lb
- Material: Solid Brass
- Handing: Universal
- Corner Style: 5/8" Radius
- Bearing Type: Plain Bearing
Available Finishes
Polished Brass, Brushed Brass, PVD Polished Brass, Antique Brass, Brushed Nickel, Antique Nickel, Polished Chrome, Brushed Chrome, Oil Rubbed Bronze, Paint Black, Primed for Paint.
Manufacturer Resources
Product Specs
- Subcategory:
- Hinges and Pivots
- Corner Style:
- 5/8" Radius Corners
- Product Group:
- Door Hinges and Pivots
- Product Type:
- Spring Hinges
- Product Subgroup:
- Spring Hinges
- Commercial/Residential:
- Commercial
- Bearing Type:
- Plain Bearing
- Non-Removable Pin (NRP):
- No
- Hinge Type:
- Spring
- MAP Policy:
- Yes
- Product Model:
- DASH95
- Product Function:
- Spring Hinges
- Product Material:
- Brass
- Product Category:
- Door Trim & Accessories
- Product Substrate:
- Brass
- Department:
- Door Hardware
Deltana DASH95U19 – Frequently Asked Questions
1) Do I have to order a left hand and right hand version of the DASH95 spring hinge?
No handing to specify. The DASH95 is universal handing and mounts on left- or right-hand doors with no modification, which is what you want when you are buying for a run of openings that are not all swinging the same way. Pick the finish and that is the only choice on the order.
2) What is a double action spring hinge and when should I use one instead of a regular spring hinge?
A double action hinge lets the door swing both directions and spring back to center on its own. That is the hinge for a service pass-through, a kitchen door, or any traffic lane where people come through from both sides with their hands full. The DASH95 does that from a floor mount and holds open at roughly 90 degrees when you need it to stay put. A conventional full mortise spring hinge like the Hager 1250 swings one direction only and closes the door back to the stop, which is what you use on a normal single-swing opening.
3) Does the Deltana DASH95 need a floor closer or a separate mounting kit?
No separate closer. The DASH95 is the closing mechanism itself, floor mounted, and the solid brass cover plates and trim ship with it. What you are ordering is the complete visible assembly in the finish you pick.
4) My door frame has 5/8 inch radius corner hinge prep already cut. Is the DASH95 a drop-in?
No. The DASH95 carries 5/8 inch radius corners, but it is a floor mounted double action assembly, not a full mortise butt hinge, so it does not drop into an existing frame mortise. If you are replacing standard spring butts in an existing 5/8 inch radius prep, the Hager 1252 full mortise spring hinge, the BEST RD2060R, or the Orca SPR4058 are the radius corner full mortise options to match that cut.
5) My door frames are prepped with square corners, not the 5/8 inch radius on the Deltana DASH95. What spring hinge fits?
The DASH95 uses 5/8 inch radius corners. For square corner preps, the Orca Hardware SPR4040 is a 4 inch by 4 inch square corner spring hinge in the 4040 Series, the McKinney 1502 is a 4-1/2 inch by 4-1/2 inch square corner full mortise spring hinge, and the Emtek 95013 is a 3-1/2 inch by 3-1/2 inch square corner spring hinge sold in pairs. If the prep is a 1/4 inch radius instead, the Hager 1251 is a full mortise spring hinge with 1/4 inch round corners and the Orca SPR4014 is a 4 inch by 4 inch hinge with a 1/4 inch radius corner.
6) The Deltana DASH95 swings both directions, but my door only needs to swing one way and self-close. What should I use instead?
The DASH95 is a double action hinge, meaning it swings in both directions and self-closes from either side, with a hold-open at approximately 90 degrees. For a single-direction self-closing opening, a full mortise spring hinge does the job: the Hager 1250 is a standard weight steel full mortise spring hinge, the Hager 1150 is the same full mortise pattern in stainless steel, and the McKinney 1502 is a 4-1/2 inch by 4-1/2 inch square corner full mortise spring hinge. All three are medium duty and mount in a conventional hinge mortise instead of at the floor.
7) My door is 1-3/4 inch thick. Does the Deltana DASH95 fit, or is there another spring hinge for a thicker door?
The DASH95 is specified for a 1-3/8 inch door thickness. For heavier doors, the SOSS 218IC invisible spring closer hinge is a 7 inch heavy duty unit with a 1-3/4 inch minimum door thickness, and the SOSS 220IC is a 7 inch heavy duty invisible spring closer in the 220 Series with a 2 inch minimum door thickness and a 20 minute fire rating. Both are concealed in the door edge and jamb rather than mounted at the floor with exposed cover plates the way the DASH95 is.
8) Will the DASH95 hold the door open, or does it always swing shut?
Both. It self-closes from either direction, and a hold-open feature engages at approximately 90 degrees so you can prop the opening for a delivery or a move-in and then knock it back into the closing range. On a stock room or service door that is usually the deciding feature.
9) What finishes does the Deltana DASH95 double action spring hinge come in?
Eleven: Polished Brass, Brushed Brass, PVD Polished Brass, Antique Brass, Brushed Nickel, Antique Nickel, Polished Chrome, Brushed Chrome, Oil Rubbed Bronze, Paint Black, and Primed for Paint. If you are matching existing lever trim across a building, the Primed for Paint version lets you finish it to a wall or door color instead, and PVD Polished Brass is the one to take where the hinge sees weather or heavy handling and you do not want the brass to dull.
10) Is the Deltana DASH95 spring hinge solid brass or brass plated?
Solid brass, both the hinge material and the cover plates, and the substrate is brass rather than plated steel. That matters in a coastal or high-humidity building where plated steel hardware starts weeping rust at the screw heads. For comparison, the Emtek 95013 spring hinge pair is plated steel.
11) What is the Deltana DASH95 part number for Oil Rubbed Bronze?
Oil Rubbed Bronze is DASH95U10B. The rest of the family runs the same way: DASH95U3 Polished Brass, DASH95U4 Brushed Brass, DASH95U5 Antique Brass, DASH95U15 Brushed Nickel, DASH95U15A Antique Nickel, DASH95U19 Paint Black. The U in the middle is the universal handing designation, so there is no separate LH or RH number to chase.
12) Is the Deltana DASH95 rated for commercial use or is it a residential hinge?
Commercial. It runs a plain bearing, which is the standard bearing type on medium duty spring hinges and is fine for normal traffic rather than a continuously cycled main entrance. The 90 lb load ceiling is the real constraint: a heavy solid core or glass door will exceed it.
13) Are the Pemko spring loaded continuous hinges an alternative to the Deltana DASH95?
They serve a different opening. The DASH95 is a floor-mounted double action spring hinge rated to 90 lb on a 1-3/8 inch door, with solid brass construction and universal handing. The Pemko Markar FM400 Series and FM900 Series are full mortise and spring loaded continuous hinges built for toilet partitions with an 80 lb load capacity, as are the Pemko FS402 Series and the Markar FS902 Series, the latter in 304 stainless steel. Continuous hinges run the full height of the leaf and distribute the load along the edge, so they are specified by partition and stile detail rather than as a drop-in for a floor-mounted brass hinge.
14) What is the difference between the Deltana DASH95 and the Orca Hardware SPR4058Z if I need a Z hole pattern?
Both carry a 5/8 inch radius corner, but the mounting is not the same. The DASH95 is a floor-mounted double action spring hinge in solid brass with cover plates, universal handing, and a 90 lb maximum load on a 1-3/8 inch door. The Orca SPR4058Z is a 4 inch by 4 inch full mortise spring hinge with a 5/8 inch radius corner and a Z hole pattern in the SPR4058 Series, medium duty, which is what you match when the existing leaf on the frame uses the staggered Z screw layout. The DASH95 does not use a leaf hole pattern in the frame at all.
15) I want a self-closing hinge that nothing shows on the door. Is there an alternative to the Deltana DASH95?
The DASH95 shows solid brass cover plates and trim at the floor and is offered in 11 finishes including Polished Brass, Oil Rubbed Bronze, Brushed Nickel, Paint Black, and Primed for Paint, so the hardware is meant to be seen and matched to the room. When nothing should be visible with the door closed, the SOSS invisible spring closer hinges conceal into the door and jamb: the 216IC in the 216 Series and the 220IC in the 220 Series both carry a 20 minute fire rating, and the 218IC is a 7 inch heavy duty unit. All three are heavy duty.
16) Does the DASH95 have a non-removable pin for a security door?
No NRP feature on the DASH95. On an out-swinging exterior opening where the hinge pins are reachable from outside, that is a reason to specify something else. The DASH95 is aimed at interior double-swing traffic, not a secured perimeter door.
How fast can I get the Deltana DASH95U19 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Deltana DASH95U19 come with a warranty?
Absolutely. The Deltana DASH95U19 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Deltana DASH95U19?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Deltana DASH95U19 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.