Deltana HPS88 Hinge Pin Stop, Hinge Mounted For Steel Hinges

It's a residential-duty stop. For apartment interiors, condo units, and single-family work it's the right part, but on a high-traffic commercial opening you want a heavier stop. The Delaney Door Saver commercial hinge pin stop and the Delaney Heavy Duty hinge pin stop are the heavier options in the same mounting style.

The HPS88 is a solid brass hinge pin stop that mounts on an existing hinge to limit how far the door swings. For a heavier duty build in the same mounting style, the Orca Hardware HPHD HD Hinge Pin Stop and the Delaney Heavy Duty Hinge Pin Door Stop are both hinge pin stops in the same format. All three install on the hinge itself rather than the floor or the baseboard, so the opening prep is the same either way.

The HPS88 is a hinge pin stop, designed to restrict how far a door will swing open. If the job calls for a hinge pin device that holds the door in position, the Orca Hardware HPDS Hinge Pin Door Stop and the Orca Hardware HPHD are both listed with a door holder function, as is the Orca Hardware HPST Series Hinge Pin Stop. Confirm which behavior the opening needs before ordering, because the two are not interchangeable at the door.

The HPS88 is designated residential. For commercial openings in the same hinge mounted format, the Delaney Door Saver Commercial Hinge Pin Door Stop is a commercial hinge pin stop, and the Orca Hardware HPHD HD Hinge Pin Stop is the heavy duty option in the Orca line. Both mount on the existing hinge the same way the HPS88 does, so an office or multi-family corridor can be standardized on one of those without changing the door prep.

A hinge pin stop does a different job. It rides on the hinge and limits how far the door swings open, so it protects the wall without anything mounted to the floor or the base trim. That's the reason people reach for it in finished rooms and in rentals where you don't want fasteners in the wall. If you need the door held open, that's a holder, not this. The Orca Hardware HPHD and HPDS hinge pin stops are catalogued as door holders if holding open is what you're after.

Nine finishes: PVD Polished Brass, Polished Brass, Antique Brass, Oil Rubbed Bronze, Brushed Nickel, Antique Nickel, Polished Chrome, Brushed Chrome, and Paint Black. If you're matching a fleet of doors, the PVD Polished Brass is the one to specify where the stop takes handling or humidity, since PVD holds its color better than a standard lacquered brass finish.

No. The HPS88 mounts to an existing hinge, so the door stays hung. It's a screwdriver job on one leaf of the hinge, which is why property managers use these for unit turns: no patching, no anchors in drywall, and it comes off just as easily.

Both limit door swing off the hinge, but they're built for different hardware. The Deltana HPS88 is made to fit steel hinges. The Emtek 2241 is catalogued as a brass hinges pivot stop, so it pairs with Emtek's brass hinge line. Match the stop to what's actually in your door rather than to the look.

The HPS88 is a hinge pin stop specified for steel hinges and installs on an existing hinge. Where the hardware is a pivot rather than a butt hinge, the Emtek 2241 Brass Hinges Pivot Stop is the pivot stop in the set. For other butt hinge openings, the Delaney Door Saver Commercial Hinge Pin Door Stop and the Orca Hardware HPDS Hinge Pin Door Stop are hinge pin stops in the same mounting position.

They are close in material but not the same device. The HPS88 is a solid brass hinge pin stop that installs on an existing hinge to restrict the swing. The Emtek 2241 is a brass hinges pivot stop, in Emtek's Hinges Pivot Stop series. If a submittal calls out a hinge pin stop by name, match it to the HPS88 or to another hinge pin stop such as the Orca Hardware HPST Series rather than substituting a pivot stop.

The Deltana HPS88 is offered in PVD Polished Brass, Polished Brass, Antique Brass, Oil Rubbed Bronze, Brushed Nickel, Antique Nickel, Polished Chrome, Brushed Chrome, and Paint Black, on a solid brass body. Where the requirement is a functional stop rather than a finish match, the Delaney Heavy Duty Hinge Pin Door Stop and the Orca Hardware HPDS Hinge Pin Door Stop cover the same hinge mounted position.

Both are hinge pin devices that go in the same place as the HPS88, on the existing hinge. The Orca Hardware HPST Series Hinge Pin Stop is the standard series, and the Orca Hardware HPHD is the HD, or heavy duty, version. Both are listed with a door holder function, while the HPS88 is a swing limiting stop in solid brass, so decide first whether the opening needs the door held or just stopped.

Sold each, packed individually in poly bags. That suits both a single door repair and a bulk buy where you want each stop bagged separately for the crews.