Deltana PRCLR4 Chapelton Lever, Dummy, Solid Brass, Universal Handing

It's a dummy lever, so there is no latch and no moving mechanism. The Chapelton PRCLR4 mounts to the door face as a fixed pull and the lever does not rotate to retract anything. Use it on a closet door held by a roller or magnetic catch, on the inactive leaf of a French pair, or on a cabinet door where you only need matching trim. If the door needs to latch, you want a passage set instead.

No handing to specify. The Chapelton dummy is universal handing, so the same part works on a left or right hand door. That's different from Baldwin's Estate 5103 half dummy, which is sold as a specific left hand or right hand part and has to be ordered to match the door.

Each order is a single lever, unit of measure each. For a door that needs trim on both faces, or an inactive French door leaf you want to look finished from both sides, order two. Emtek sells some of its dummy levers as a pair (the Cortina dummy, for instance), so quantities aren't interchangeable between brands.

It's classified residential, and it's a non-keyed dummy with no grade rating behind it, so it isn't the part for a commercial corridor or a high-traffic institutional opening. For dummy trim on a commercial door, look at the BEST 9K Series 1DT single dummy trim, which is Grade 1 heavy duty, or the BEST 7KC Series 1DT in Grade 2 medium duty. The Deltana is better suited to interior residential doors, model homes, and hospitality-style guest room closets.

The Deltana PRCLR4 Chapelton is sold as a dummy lever in solid brass with universal handing, each. If you want a factory-matched pair for a set of double or closet doors, Emtek offers dummy levers sold as pairs, including the Arts & Crafts lever and the Hammered lever in the Arts & Crafts line, and the Cortina lever in the Classic Brass line. Those ship two levers to the order, while the Chapelton is ordered per piece, so you would order two PRCLR4 to dress both leaves.

The Deltana PRCLR4 Chapelton is classed for residential use. For a commercial corridor or an institutional facility that specifies an ANSI grade, the BEST 9K Series 1DT single dummy trim is a Grade 1 heavy duty non-keyed dummy, and the BEST 7KC Series 1DT single dummy trim is a Grade 2 medium duty dummy. The Accentra 455LN Augusta is another Grade 1 single dummy cylindrical lever in the 5400 Series. All three are dummy trim like the Chapelton, so the door prep intent is the same - no latch, trim only.

The PRCLR4 Chapelton is a dummy: non-keyed, no latch, the lever is fixed trim. If the door needs to latch shut, you want a passage function instead. In a decorative residential line, the Baldwin Estate 5103 passage lever with the 5048 rose covers that. In a builder-grade lever, the Kwikset 200BRNL Breton passage is Grade 3 for 1-3/8 inch to 1-3/4 inch doors, and the Callan Asheville is a Grade 3 passage leverset. For a bed or bath door that needs a thumbturn, the Baldwin Estate 5103 privacy lever uses the same 5103 lever and 5048 rose.

No, and this is the most common mis-order. The PRCLR4 Chapelton is dummy function and non-keyed - the lever does not rotate a latch, it is surface trim on the door face. Passage levers such as the Falcon B101 Grade 2 non-handed passage, the Arrow GL01 Grade 2 Sierra passage for 1-3/4 inch to 2 inch doors, or the Hager 2510 Grade 2 Withnell passage all operate a retracting latch and require a bored door with a latch bore. If the door is already prepped for a latch, the Chapelton dummy will not fill that prep.

No. The Chapelton dummy is non-keyed and takes no cylinder, because there is no lock body behind it. If the opening needs to lock, pick a keyed function in the same style family or move to a keyed lever from another line, such as the Hager 2525 entrance lever or the Cal-Royal AG00 entrance lever with a 6-pin Schlage C keyway.

The dummy has no latch at all, so for a working closet or hall door you need a passage set. Comparable residential-style passage levers include the Kwikset 200BRNL Breton (Grade 3, 1-3/8 to 1-3/4 inch doors) and the Callan Asheville Grade 3 passage leverset. For a privacy bath or bedroom door, the Kwikset 300BRNL Breton is the privacy version.

A dummy lever like the Chapelton mounts to the door face and does not use the cross bore or edge bore, so it is not a drop-in cover for a hole left by a removed cylindrical lockset. If you are pulling a bored lock and want the hole gone, patch the door or fit a bored-style dummy trim built for that prep, such as the BEST 7KC or 9K single dummy trim. The Deltana is for a door with no lock prep.

No. The Deltana PRCLR4 Chapelton dummy is universal handing, so one part number covers either side of the opening. That is a real difference from some decorative half dummies: the Baldwin Estate 5103 half dummy with the 5048 rose is ordered as a left hand part or a right hand part, so you have to determine the hand before ordering. If you are buying for stock across a building, the universal Chapelton removes that handing decision.

The Deltana PRCLR4 Chapelton is solid brass in the Elite Collection with a choice of oil rubbed bronze, brushed nickel, polished chrome or polished brass. If the opening does not need a decorative solid brass lever, the Callan Bentley is a Grade 2 dummy lever, and the BEST 7KC Series 1DT is a Grade 2 medium duty single dummy trim. Both are dummy function like the Chapelton, so they mount as fixed trim with no latch, but they are plain commercial-style levers rather than a decorative brass design.

The PRCLR4 Chapelton is non-keyed, so it takes no cylinder at all. For a keyed opening, the Hager 2525 is a Grade 2 commercial cylindrical entry lock with lever handle for 1-3/8 inch to 2 inch doors, the Cal-Royal AG05 is a Grade 2 storeroom lever with a deadlocking latchbolt, and the Cal-Royal AG00 is an entrance lever with a 6-pin Schlage C keyway keyed different on a 2-3/8 inch backset. For a school door, the Dexter C1000 classroom is a Grade 1 keyed clutching lever.

Solid brass, both material and substrate. For a property manager that matters on coastal or high-humidity interiors and on doors that get handled constantly, since the finish sits on brass rather than on a zinc or steel casting.