Deltana R2010 Double Robe Hook, R-Series

The R2010 is a residential-rated piece from Deltana's R Bathroom Series, a traditional-styled solid brass collection. For a commercial restroom, a school, or anywhere the hook takes abuse and gets hung on, look at a heavier institutional hook instead: the Trimco 3070-1 Coat and Hat Hook is the commercial-style option in that vein. The R2010 suits apartments, condos, and single-family units where the look is the point.

The Deltana R2010 is a double robe hook in solid brass with a 2-5/8 inch base and 2-5/8 inch projection. For another double hook, the Orca Hardware 4854 Blakely double robe hook and the Orca Hardware 4954 Whidbey double robe hook both carry two hooks in their own series styling, and the Emtek 2266 SELECT knurled tip double hook with rosette carries a knurled tip and a separate rosette at the wall. All four hold two garments from one mounting point, so the choice comes down to the look you are matching in the bath.

The R2010 is the double version. For a single hook, the Emtek 2606 solid brass robe hook is the nearest match in material, and the Orca Hardware 2753 Cypress robe hook and Orca Hardware 3654 Swirl robe hook are single robe hooks in their own series. A single hook takes the same one-point wall mounting but gives you one garment position instead of two, which is usually the call in a powder room or a narrow strip of wall beside a shower.

The R2010 is a residential bath accessory in solid brass. For institutional and commercial openings, look at the Trimco 3070-1 coat and hat hook and the Trimco 7010 fOCAL robe hook and stop. The 7010 combines the hook with a door stop in one piece, which is the standard approach on a restroom partition or a back-of-door application where you want the hook and the stop from a single fastening. Trimco is architectural hardware; Deltana's R Series is a traditional bath collection.

Six: PVD Polished Brass, Polished Nickel, Brushed Nickel, Antique Nickel, Paint Black, and Polished Chrome. If you are matching a run of units, the PVD Polished Brass is the one worth noting, since PVD is a deposited coating rather than a lacquer and holds up better to daily wiping than standard lacquered brass.

Solid brass, both the material and the substrate. That matters in a bathroom because a plated zinc hook will pit and bubble where a solid brass body under a good finish will not. It is the same construction across every finish the R2010 comes in.

A double hook like the R2010 gives you two arms off one mounting base, so a robe and a towel hang together without a second wall penetration and a second set of anchors. A single hook such as the Emtek 2606 Solid Brass Robe Hook takes one item and takes up less wall. If you have a narrow strip of wall beside a vanity or behind a door, the double is the better use of it; if you are spacing several hooks in a row, singles give you more control over the layout.

The R2010 is part of Deltana's R-Series bathroom collection, so it is styled to run with the other R-Series pieces (towel bars, rings, paper holders) in the same traditional profile and the same finish names. If your existing accessories are R-Series, order the R2010 in the matching finish and the family reads as one set. Mixing across Deltana series will get you the right finish but a different profile.

No. The R2010 is a wall-mounted robe hook only, with a 2-5/8 inch projection and no bumper. If you need the hook to catch the door and protect the wall behind it, the Trimco 7010 fOCAL Robe Hook and Stop is the combination piece to look at instead.

No. The Trimco 7010 fOCAL is a robe hook and stop, meaning it doubles as a door stop, and it is a single-hook architectural piece. The Deltana R2010 is a double robe hook from the R-Series traditional bath collection and does nothing to arrest the door. If your reason for the 7010 is the stop function, the R2010 will not cover it; if you want two garment positions in a traditional bath finish, the 7010 will not cover that.

The R2010 is solid brass throughout, both material and substrate. If you want a different base metal, the Emtek 25050 is a wrought steel robe hook and the Emtek 2306 is a sandcast bronze double hook. Wrought steel and sandcast bronze read very differently at the wall than polished brass, and sandcast bronze in particular carries a textured, hand-poured surface rather than the smooth machined face of the R-Series.

Yes. The Deltana R2010 belongs to the R-Series, a traditional solid brass bath accessory collection, so the hook can be matched to other R-Series bath pieces. The comparables work the same way: the Emtek 2606 sits in Traditional Bath Hardware, the Emtek 2266 in Select Bath Hardware, the Emtek 25050 in Wrought Steel Bath Hardware, and the Emtek 2306 in Sandcast Bronze Bath Hardware, while Orca groups its hooks by named series such as 48-Blakely and 49-Whidbey. Pick the family first, then the hook, and the towel bar and paper holder will follow in the same design.

The Deltana R2010 projects 2-5/8 inches from the wall on a 2-5/8 inch base, so plan for that much stick-out where a door leaf or a shower door swings past. If the swing path is the constraint, the Trimco 7010 fOCAL is a robe hook and stop, which is designed for exactly the back-of-door situation where the hook and the stopping surface need to be the same fitting rather than two separate obstacles on the wall.

Sold and priced each. The R2010 is a single double hook, meaning one wall-mounted piece with two arms, not two hooks in a box. Property managers doing a multi-unit refresh should count one per bathroom position, not one per unit.

Nothing about the R2010 restricts it to a wall. It is a surface-mounted piece with a 2-5/8 inch base, so it goes wherever you can get solid backing behind it, including the back of a bathroom or closet door. On hollow-core doors and on drywall without blocking, set proper anchors, because a double hook carrying a wet robe pulls harder on the fasteners than a single.

The Emtek 2266 SELECT knurled tip double hook is specified with a rosette, so the mounting escutcheon is part of the design. The Deltana R2010 is a double robe hook with a 2-5/8 inch base, and that base is the wall footprint you are covering. If you are replacing an older hook and need to hide a larger patched area, the rosette style on the 2266 and the base dimension of the R2010 are the two numbers to compare against the wall you have.

Not necessarily. The Trimco 3070-1 is a coat and hat hook, a two-position architectural hook shaped to take a coat on the lower point and a hat on the upper. The Deltana R2010 is a double robe hook in the R-Series bath collection, styled for towels and robes in a residential bathroom. Both give two hanging points from one mounting, but one is drawn for a corridor or office and the other for a bath, and a spec that calls out a coat and hat hook is usually calling out the architectural piece.