Deltana SS44058B-S 4" x 4" x 5/8" Radius Corner Hinge, Residential, NRP, Stainless Steel (Pair)

Yes, handing has to be specified. The SS44058B-S comes as a left hand or a right hand pair, so determine the swing before ordering. Stand outside the door (the side it swings away from): if the hinges are on your right, it is a right hand door. Getting it wrong matters here because the non-removable pin feature only works as intended when the hinge is on the correct face.

NRP means non-removable pin: a set screw in the barrel sits against the pin once the door is closed, so nobody can knock the pin out from the hinge side and lift the door off. That is the point of it on an outswing exterior door, where the hinge barrels are exposed on the outside. The SS44058B-S is a 4 inch by 4 inch full mortise hinge supplied as a pair with the NRP feature.

Residential duty. The SS44058B-S is classified as a residential hinge at 4 inch by 4 inch with a 0.083 inch leaf thickness, which is light for a high-traffic commercial door or a hollow metal frame. For an office, school, or multi-family corridor door, step up to a commercial ball bearing hinge such as the Don-Jo HWBB74545 heavy weight full mortise at 4-1/2 inch by 4-1/2 inch, or the Hager BB1168 if you need the non-removable pin in a heavy duty hinge.

The Deltana SS44058B-S is a residential duty hinge supplied with a non-removable pin. For a commercial opening needing the same anti-removal protection, the Hager BB1168 is a non-removable pin full mortise ball bearing heavy duty hinge. It is ball bearing rather than plain bearing, which is the functional difference between the two.

The Deltana SS44058B-S is a 4 inch by 4 inch full mortise hinge with 5/8 inch radius corners in stainless steel, sold as a pair. The closest match on corner style and size is the Delaney DLY-RH45xx, a 4 inch by 4 inch bulk residential exterior hinge with 5/8 inch radius corners sold as a pair, and the Delaney DLY-RH40xx, a 4 inch by 4 inch residential hinge for Castlegate offered in 5/8 inch radius and square corner. The Deltana is stainless steel, which is the difference to weigh if the opening is coastal or otherwise exposed.

The Deltana SS44058B-S is cut with 5/8 inch radius corners and will not seat correctly in a 1/4 inch radius mortise. For a 4 inch by 4 inch leaf with 1/4 inch radius corners, the Orca Hardware ORC-COM4014 is a 4 inch by 4 inch plain bearing commercial hinge with 1/4 inch radius corners. In a 3-1/2 inch leaf, the Orca ORC-COM3514 carries the same 1/4 inch radius corner. Both are plain bearing, the same bearing type as the Deltana.

A 5/8 inch radius corner hinge like the Deltana SS44058B-S will leave a gap in a square cut mortise. In the same 4 inch by 4 inch size, the Orca ORC-COM4040 is a square corner plain bearing commercial hinge and the Delaney DLY-CH401X is a 4 inch by 4 inch commercial ball bearing hinge with square corners. In a 3-1/2 inch leaf, the Emtek 91013 is a square corner residential plain bearing pair and the Schlage Residential S3P1010 is a square corner plain bearing mortise hinge sold three to a pack.

That is exactly where they earn their keep. The SS44 Series is stainless steel through the base material, not a plating over steel, so it holds up to salt air and outdoor exposure far better than a plated steel hinge, which rusts at the barrel and streaks the door. For waterside property, oceanfront rentals, or any exterior opening that gets weather, the stainless leaf is the reason to pick this over a standard residential steel hinge like the Delaney 4 inch exterior residential hinge.

The SS44058B-S is sold by the pair, so a standard door hung on three hinges takes two pairs and you will have a spare leaf, or two pairs cover two doors on two hinges each. Fastening is #10 x 3/4 inch wood screws, which suits a wood door and wood jamb. For a heavier slab or an exterior door, plan on three hinges per leaf.

The SS44058B-S uses an arc hole pattern, the staggered curved layout standard on residential mortise hinges, so it lines up with the holes left by most factory prehung wood doors at the 4 inch by 4 inch size. Full mortise means both leaves sit in routed pockets, one in the door edge and one in the jamb.

No. The Deltana SS44058B-S is a mechanical full mortise hinge with no wire path through the barrel. For power transfer to an electrified lock, use a purpose-built hinge such as the BEST CECB179-12C, a steel full mortise concealed bearing electrified hinge with a 12-wire quick connect, or the Command Access ETH-CB70, a 3 knuckle standard weight energy transfer hinge on a steel base. The Command Access ETM-CB70 adds door position sensing if you also need status monitoring.

They are not interchangeable. The Deltana SS44058B-S is a full mortise butt hinge with a fixed non-removable pin and no closing force. A Stanley Security 2060R at 4-1/2 inch by 4-1/2 inch is a full mortise spring hinge with square corners that self-closes the door, and the BEST DAP-3 is a double acting pivot for commercial interior doors that swings both directions. Pick those only when the opening calls for self-closing or double action, not as a like-for-like hinge swap.

The Deltana SS44058B-S is a residential duty hinge, and its security feature is the non-removable pin. Detention openings call for a different class of product: the BEST BB855 is a heavy-duty steel double weight concealed ball bearing prison hinge, the Stanley BB855 is a double weight prison hinge at 5 inch by 6 inch furnished with no holes and not swaged, and the Hager 990 STEEL is a full surface prison hinge at 3 inch by 4 inch with a welded tip.

The Deltana SS44058B-S is stainless steel, which is the reason it is specified on waterside and outdoor openings where corrosion resistance matters. Residential alternatives such as the Emtek 91013 and Emtek 94013 pairs are plated steel, and the Ives 1010RP residential hinges are steel. The McKinney T2314 is a non ferrous standard weight 5 knuckle hinge if you need another corrosion-minded base material.

Brushed stainless is the finish offered on the SS44058B-S, in both the left hand and right hand pair. It reads as a warm-free, satin gray, close to brushed nickel or satin chrome in appearance but not an exact match, since it is the mill finish on the stainless itself rather than a plating. On a coastal exterior door most buyers accept the slight difference in exchange for the corrosion resistance.

The Deltana SS44058B-S is a plain bearing full mortise hinge in stainless steel, 4 inch by 4 inch with 5/8 inch radius corners and a non-removable pin. The Ives 3CB1 is a 3-knuckle concealed bearing full mortise hinge rated medium duty, where the bearing is hidden inside the knuckle rather than the leaves riding directly on one another. The Hager 920 is another concealed bearing option, a 2 knuckle steel full mortise hinge rated medium duty.

The Deltana SS44058B-S is packaged as a pair, so a three-hinge door takes two packs. If you prefer counting by the door, the Ives 1010RP steel plain bearing residential hinges ship as a set of 3 and the Schlage Residential S3P1010 comes as a pack of 3. Both of those are square corner, so confirm your mortise corner before switching from the 5/8 inch radius Deltana.