You may also like
Klein Tools D228-8TT Diagonal Cutting Pliers, High-Leverage, Tie Ring, 8-Inch
Model: KLN-D228-8TT
Diagonal Cutting Pliers, High-Leverage, Tie Ring, 8-Inch
Warnings
NOT insulated. Plastic-dipped or slip-on plastic handles are NOT intended for protection against electrical shock.
Always wear...
Klein Tools
$103.56
$53.56
Klein Tools D248-8-INS Diagonal Cutting Pliers, Insulated, High-Leverage, Angled Head, 8-Inch
Model: KLN-D248-8-INS
Diagonal Cutting Pliers, Insulated, High-Leverage, Angled Head, 8-Inch
Features
High-leverage design for 36-percent greater cutting power than other plier designs
Durable molded insulation meets or...
Klein Tools
$150.63
$100.63
Klein Tools 2288RINS Diagonal Cutting Pliers, Insulated, High Leverage, 8-Inch
Model: KLN-2288RINS
Diagonal Cutting Pliers, Insulated, High Leverage, 8-Inch
Warnings
Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of...
Klein Tools
$109.99
$59.99
Klein Tools D228-7 Diagonal Cutting Pliers, High-Leverage, 7-Inch
Model: KLN-D228-7
Diagonal Cutting Pliers, High-Leverage, 7-Inch
Features
Plastic-dipped handles for comfort and ease of identification
Short jaws and beveled cutting edges permit close cutting of wire
Made in USA...
Klein Tools
$87.49
$37.49
Klein Tools Diagonal Cutting Pliers, High-Leverage, 8-Inch
Model: KLN-D228-8
Diagonal Cutting Pliers, High-Leverage, 8-Inch
Warnings
NOT insulated. Plastic-dipped or slip-on plastic handles are NOT intended for protection against electrical shock.
Always wear approved eye...
Klein Tools
$96.94
$46.94
Diagonal Cutting Pliers, Insulated, High Leverage, 8-Inch
D228-8-INS - spec sheet
Warnings
- Wear approved eye protection.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
- Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
- Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
- Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
- Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
Features
- Integral guards help prevent hand contact with conductive parts
- Made of forged steel for maximum durability
- Made in USA
- High-leverage design. Rivet is closer to the cutting edge for 36-percent greater cutting power than other plier designs
- A flame retardant, impact-resistant, bright orange outer coating
- Two layers of insulation provide protection against electric shock
- Klein Tools Pliers are individually tested to meet or exceed ASTM F1505-16(2021) and IEC 60900 -2018 standards for insulated tools, and clearly marked with the official 1000-volt rating symbol
- Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
- Flame Retardant and Impact Resistant Handle
D228-8-INS - spec sheet
Manufacturer Resources
Product Specs
- Cut Style:
- Diagonal-Cutting
- Cutting Knives:
- Standard
- Depth:
- 8.2500 in
- Handle Color:
- Orange
- Handle Finish:
- 2-Layer Insulation
- Handle Length:
- 4.9" (12.4 cm)
- Height:
- 0.4380 in
- Insulated:
- Yes
- Jaw Length:
- 0.781" (2 cm)
- Jaw Thickness:
- 0.46" (1.2 cm)
- Jaw Width:
- 1.25" (3.2 cm)
- Joint Type:
- Hot-Riveted
- Material:
- Induction Hardened Steel
- Nose Type:
- Tapered
- Overall Length:
- 8.24" (20.9 cm)
- Standard:
- IEC 60900 and ASTM F1505
- Type:
- Diagonal Cutting Pliers
- Weight:
- 0.7000 lbs
- Width:
- 3.1000 in