DiodeLED DI-24V-BLBSC3-30-100 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,131.14
DiodeLED DI-24V-BLBSC3-30-100 Blaze Basics Dimmable LED Tape Light, 24V, 3000K, Pack of 100

DiodeLED DI-24V-BLBSC3-30-100 Blaze Basics Dimmable LED Tape Light, 24V, 3000K, Pack of 100

(No reviews yet) Write a Review

Model: DI-24V-BLBSC3-30-100

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,131.14
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

DiodeLED DI-24V-BLBSC3-30-100 Blaze™ Basics Dimmable LED Tape Light, 24V DC, 3000K

The DiodeLED DI-24V-BLBSC3-30-100 is a dimmable LED tape light from the Blaze™ Basics series, engineered for reliable, high-quality linear illumination in residential and light commercial applications. This 100-ft reel operates on 24-Volt DC and draws 4.5-Watt per foot, delivering 344 lumens per foot at a warm 3000K color temperature with a 90 CRI rating for accurate, true-to-life color rendering. Its dimmable design allows for flexible light-level control, making it well suited for under-cabinet, cove, accent, and general architectural lighting projects where smooth, consistent output is required.

Key Features

  • Reel Length: 100-ft continuous run for long installations without splicing.
  • Power Draw: 4.5-Watt per foot for efficient, energy-conscious operation.
  • Voltage: 24-Volt DC low-voltage system for safe, consistent performance across the full reel length.
  • Light Output: 344 Lumens per foot for bright, even illumination.
  • Color Rendering: 90 CRI delivers accurate color rendition, ideal for spaces where true color representation matters.
  • Color Temperature: 3000K warm white tone for inviting, comfortable ambiance.
  • Dimmable: Compatible with dimming controls for adjustable brightness levels to suit any setting.
  • Series: Part of the DiodeLED Blaze™ Basics series, built for dependable everyday tape light performance.

Technical Specifications

  • Model: DI-24V-BLBSC3-30-100
  • Voltage: 24-Volt DC
  • Wattage: 4.5-Watt/ft
  • Length: 100-ft
  • Lumens: 344 Lumens/ft
  • CRI: 90
  • Color Temperature: 3000K
  • Dimmable: Yes
  • Series: Blaze™ Basics

Typical Applications

  • Under-Cabinet and Task Lighting
  • Cove and Architectural Accent Lighting
  • Residential and Light Commercial Interiors
  • Display Case and Shelf Lighting
  • General Ambient Lighting Projects Requiring Dimming Control

Why DiodeLED?

DiodeLED's Blaze™ Basics tape light combines consistent 24-Volt DC performance, 90 CRI color accuracy, and dimmable operation into a dependable 100-ft reel built for professional lighting installations. With 344 lumens per foot at 3000K, it delivers warm, reliable illumination suited for a wide range of interior lighting applications.

Manufacturer Resources

Product Specs

list_batch:
DIO-20260924
Product Type:
LED Tape Light & Channel
Voltage Rating:
24V
Product Wattage:
4.5W/ft
Light Temperature:
3000K
CRI:
90
Lumens:
344 Lumens/ft
Dimmable:
Yes
Series:
Blaze Basics
Department:
Electrical
Product Subgroup:
Light Fixtures
Pack size (unit):
100
Product Group:
Lighting

DiodeLED DI-24V-BLBSC3-30-100 – Frequently Asked Questions

1) Will this DiodeLED Blaze Basics tape work on a 12V transformer I already have?
No. The Blaze Basics DI-24V-BLBSC3-30-100 is a 24V DC tape and needs a 24V DC supply. Running it on 12V will leave it dim or dead, and there is no jumper or setting to change that. If your existing hardware is 12V, either replace the driver with a 24V unit or buy a 12V tape instead.
2) What dimmer do I use with 24V DiodeLED tape light?
The tape itself is dimmable, but the dimming is done upstream at the driver, not at the tape. You pair it with a 24V DC constant-voltage dimmable driver and a control the driver accepts, typically forward-phase, ELV, or 0-10V depending on the driver you choose. Match the dimmer type to the driver spec sheet, and keep the connected wattage inside the driver's dimming range so you do not get flicker at the low end.
3) Can I run one continuous 100-foot length of this tape from a single end feed?
No. Even on a 24V system, a single end feed over 100 feet will show voltage drop and visible dimming toward the far end. The 100-foot reel exists so you can cut the exact lengths a job needs without splicing mid-run, not so you can energize all 100 feet from one point. Break the installation into shorter sections and home-run each to the driver, or feed from both ends of a longer section.
4) What else do I need to order besides the tape to finish a cove lighting job?
The reel is tape only. A working installation also needs a 24V DC dimmable driver sized above 4.5W per foot of tape you are actually installing, a compatible dimmer or control, lead wire or connectors for each feed point, and in most cove and under-cabinet work an aluminum channel with a lens to protect the tape and diffuse the diodes. None of that is part of the reel.
5) Is 344 lumens per foot bright enough for under-cabinet kitchen lighting?
At 344 lumens per foot, this tape is in the range normally used for under-cabinet task lighting and cove work. Over a 3-foot cabinet run that is roughly 1,030 lumens of task light. With 90 CRI it renders food and finishes accurately, which is the reason spec writers call out 90 CRI for kitchens and retail display rather than a cheaper 80 CRI tape.
6) Is 3000K the right color temperature if the rest of my building is 2700K or 4000K?
This reel is 3000K warm white, which is a step cooler and crisper than 2700K incandescent-look lamping and noticeably warmer than 3500K or 4000K. Mixing temperatures in one sightline reads as a mistake, so if your existing cove or under-cabinet runs are 2700K, order the 2700K version of the Blaze Basics tape rather than blending. For a property manager standardizing across units, 3000K is the common interior choice for residential and light commercial spaces.
7) Does the 100 in DI-24V-BLBSC3-30-100 mean 100 reels or 100 feet?
It is the reel length. DI-24V-BLBSC3-30-100 is a single 100-foot continuous reel of Blaze Basics tape, which is why the catalog pack size reads 100. You are buying one reel of tape, not a hundred of anything.
8) Is this tape light suitable for a damp location like a bathroom or exterior soffit?
Treat Blaze Basics DI-24V-BLBSC3-30-100 as an interior product. It is specified for under-cabinet, cove, accent, display case, and general architectural lighting in residential and light commercial interiors. For wet or damp exposure you want a tape built and rated for that environment plus a suitably rated driver and enclosure.
How fast can I get the DiodeLED DI-24V-BLBSC3-30-100 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the DiodeLED DI-24V-BLBSC3-30-100 come with a warranty?
Absolutely. The DiodeLED DI-24V-BLBSC3-30-100 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the DiodeLED DI-24V-BLBSC3-30-100?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the DiodeLED DI-24V-BLBSC3-30-100 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!