Don-Jo 1468 Rubber Stop for Ki...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$5.08
$3.43
Don-Jo 1468 Rubber Stop for Kick Down Door Holders in Gray

Don-Jo 1468 Rubber Stop for Kick Down Door Holders in Gray

(No reviews yet) Write a Review

Model: 1468

In Stock (leaves warehouse same day if ordered before 3pm ET)

$5.08
$3.43
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo 1468 Rubber Stop for Kick Down Door Holders in Gray

The Don-Jo 1468 is a replacement rubber stop designed specifically for kick down door holders, finished in gray to blend seamlessly with standard commercial door hardware. Featuring a threaded rubber fastener design for secure, tool-friendly installation, this stop provides a reliable cushioning surface that protects both the door and floor from impact damage. Sold in a shelf pack of 100, the Don-Jo 1468 is an ideal stocking solution for facilities managers, contractors, and distributors serving commercial properties.

Key Features

  • Purpose-Built Compatibility: Designed specifically as a replacement rubber stop for kick down door holders, ensuring a proper fit and reliable performance.
  • Threaded Rubber Fastener: Equipped with a threaded rubber fastening system for straightforward, secure installation without the need for additional hardware.
  • Gray Finish: Neutral gray finish coordinates with standard commercial door hardware and floor finishes for a clean, professional appearance.
  • High-Volume Shelf Pack: Available in a convenient shelf pack of 100 units, making it an efficient choice for bulk stocking, maintenance programs, and distribution.
  • Floor-Mounted Door Stop Type: Classified as a floor-type door stop, providing stable, low-profile protection at the base of the door.
  • Commercial Grade: Rated for commercial applications, delivering the durability and consistency required in high-traffic environments.
  • Protective Cushioning: Rubber construction absorbs door impact, helping to prevent damage to doors, frames, and flooring surfaces over time.

Technical Specifications

  • Product Group: Door Trim and Accessories
  • Subcategory: Door Stops & Holders
  • Product Subgroup: Door Stops, Holders, Silencers & Bumpers
  • Product Type: Door Stops - Floor
  • Commercial/Residential: Commercial
  • Product Category: Door Trim and Accessories
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Don-Jo 1468?

Don-Jo door stop accessories are engineered for commercial-grade performance, with the 1468 rubber stop offering a threaded rubber fastener design that ensures a secure, lasting fit in kick down door holders. Packaged in quantities of 100, this product is built for the demands of professional facilities maintenance and distribution, delivering consistent quality across every unit in the pack.

Product Specs

Product Group:
Door Trim and Accessories
Subcategory:
Door Stops & Holders
Product Subgroup:
Door Stops, Holders, Silencers & Bumpers
Product Type:
Door Stops - Floor
Commercial/Residential:
Commercial
Product Model:
1468
Product Substrate:
Threaded Rubber
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Don-Jo 1468 – Frequently Asked Questions

1) What is the Don-Jo 1468 rubber stop actually for, and does it work on a regular floor stop?
The 1468 is a replacement rubber tip for kick down door holders, not a complete door stop. It threads into the foot of the holder arm so the arm grips the floor instead of scarring it. If you're replacing the bumper on a dome or gooseneck floor stop, this is the wrong part. For a floor stop with a rubber bumper you can swap, look at the Ives FS13 heavy-duty brass floor dome stop, which is built with a replaceable rubber bumper.
2) Is the Don-Jo 1468 sold individually or do I have to buy a box?
It ships as a shelf pack of 100. That suits a facility running a standing maintenance program or a distributor stocking the shelf, since kick down holder tips are a wear item that gets replaced repeatedly across a building. If you only need one or two tips for a single opening, a 100-pack is more than the job needs.
3) My kick down door holder won't hold the door open anymore. Do I need a whole new holder?
Usually not. When a kick down holder slips, the rubber foot has glazed or worn flat and lost its grip on the floor. Replacing the tip with a 1468 restores the friction surface and costs a fraction of the holder. Replace the holder only if the arm, spring or door-mounted body is bent or broken. If you'd rather stop chasing worn tips, a magnetic hold-open like the SOSS MDH holder and stop is a different approach that doesn't rely on a rubber foot gripping the floor.
4) What should I use instead of a kick down holder if I want the door to stop rather than stay open?
A kick down holder, which the 1468 tip belongs to, is meant to hold a door open until someone kicks it back up. If the actual need is to stop the door before it hits a wall, that's a floor stop instead: the Ives FS17 heavy-duty brass floor dome stop, the Emtek 2254 floor door bumper at 1-3/8 by 1-1/4 inches, or the Deltana UFB4505 round universal floor bumper at 1-1/2 inches. If you want both functions in one unit, the Ives FS40 / FS41 / FS42 / FS43 automatic floor stop and holder combines them and adjusts for door-to-floor clearance.
5) The kick down holder on our stairwell door is worn out at the base and the rubber will not hold. What do we replace it with?
If the holder body itself is still sound, the Don-Jo 1468 threaded rubber stop restores the contact surface, and it comes in a shelf pack of 100 for stocking a fleet of doors. If the holder mechanism is failing rather than just the rubber, replace the whole unit: the Ives FS40 / FS41 / FS42 / FS43 automatic floor stop and holder is a heavy-duty assembly with adjustable door-to-floor clearance, and the Orca Hardware 22HD Series goose neck floor stop is a door holder that fits 1-3/8 inch or 1-3/4 inch doors.
6) Our doors are held open with a rubber tip against the floor and the tips keep tearing out. Is there a hold-open that does not use a rubber contact?
There is. The Don-Jo 1468 rubber stop is the consumable part in a kick down holder, so on high-cycle openings it is a recurring replacement, which is why it ships in packs of 100 for maintenance stock. If you would rather move away from a rubber contact surface, the SOSS MDH is a heavy-duty magnetic door holder and stop measuring 3-5/16 inch by 1-3/4 inch, which holds the door magnetically rather than by rubber friction against the floor.
7) Do I need any hardware or tools to install a Don-Jo 1468 rubber tip?
No extra hardware. The 1468 uses a threaded rubber fastener, so it screws straight into the holder arm and no screws, adhesive, or anchors are involved. That's the whole reason maintenance crews stock them: a worn tip gets swapped by hand at the door, with the holder left in place on the door.
8) Is the Don-Jo 1468 rated for high traffic commercial doors or is it a residential part?
Commercial grade. The 1468 is specified for commercial use, which is why it turns up in offices, schools, hospitals, retail, warehouses, multi-tenant residential and municipal buildings. In those settings the rubber is the sacrificial piece, taking the impact so the door, frame and floor don't.
9) Can I use a Don-Jo 1468 as a bumper on a wall or on the bottom of a door?
No. The 1468 is a floor-type component that threads into a kick down holder arm and bears against the floor. It has no wall plate, no door mounting and no base of its own. For a standalone floor-mounted bumper, the Deltana UFBS138 square universal floor bumper at 1-3/8 inches or the Emtek 2257 cylindrical floor bumper at 1-1/2 inches are self-contained units built for that job.
10) Will the Don-Jo 1468 fit any brand of kick down door holder?
The 1468 is built as the replacement tip for kick down door holders and threads in rather than pressing or gluing on. Whether it mates with a holder from another manufacturer depends on that holder's thread, so match it to a Don-Jo kick down holder or confirm the thread on the arm you're servicing before ordering a pack of 100.
11) What gray floor stop matches the gray rubber tip on our kick down holders?
The Don-Jo 1468 is finished in gray so the replacement rubber blends with standard commercial door hardware. If you are adding floor stops on the same run of doors and want the tip color to match, the Orca Hardware 23LP Series dome floor stop is supplied with a gray tip. The Orca 22HD Series goose neck floor stop carries a black tip instead, which will read differently against the same floor.
12) For a decorative lobby door, can we use the Don-Jo 1468 or do we need something with a finished cap?
The Don-Jo 1468 is a gray rubber stop for kick down holders on commercial openings and has no decorative cap. Where the floor hardware is visible in a finished space, the Deltana UFBD3505 is a 3-1/2 inch round universal floor bumper in solid brass with a decorative profile, the Deltana UFBP4505 is a 1-5/8 inch round universal floor door bumper with a pattern cap in solid brass, and the Emtek 2251 half dome door stop offers another finished floor profile.
13) What is the difference between ordering the Don-Jo 1468 and ordering a complete goose neck floor stop?
The Don-Jo 1468 is the rubber component alone, a threaded rubber stop that seats into a kick down door holder, sold in a shelf pack of 100. A complete goose neck unit is the whole assembly including its arm and base: the Emtek 2253 goose style door stop, the Delaney gooseneck floor door stop, and the Orca Hardware 22HD Series goose neck floor stop with black tip are each sold as a full stop rather than as a replacement tip.
14) How many versions of the Don-Jo 1468 are there? Do I have to pick a size or finish?
One configuration only, model 1468 in gray. There's no size, handing, or finish choice to make, so ordering is just the model number and the quantity.
How fast can I get the Don-Jo 1468 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo 1468 come with a warranty?
Absolutely. The Don-Jo 1468 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo 1468?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo 1468 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!