Don-Jo 1480 Rubber Angle Floor...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$22.46
Don-Jo 1480 Rubber Angle Floor Stop in Satin Chrome Finish, Brass Construction

Don-Jo 1480 Rubber Angle Floor Stop in Satin Chrome Finish, Brass Construction

(No reviews yet) Write a Review

Model: 1480-626
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$22.46
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo 1480 Rubber Angle Floor Stop in Satin Chrome Finish, Brass Construction

The Don-Jo 1480 is a commercial-grade Rubber Angle Floor Stop crafted from solid brass with a 626 Satin Chrome finish, delivering lasting durability and a refined appearance for demanding door hardware applications. Standing 2-5/8" in height with a 2-1/2" x 1" base, this floor stop provides a stable, low-profile footprint that effectively protects walls and door hardware from impact damage. Each unit ships with a complete fastener package — 2 ea. 1/4" x 1-1/2" SMS screws and 2 ea. plastic anchors — for straightforward installation on a variety of floor surfaces. Designed for commercial environments, the 1480 is available in a shelf pack of 10, making it an efficient choice for contractors and facility managers outfitting multiple openings.

Key Features

  • Precise Dimensions: Stands 2-5/8" tall with a 2-1/2" x 1" base for a stable, low-profile installation that suits a wide range of door clearances.
  • Brass Construction: Solid brass material provides exceptional corrosion resistance and long-term durability in high-traffic commercial settings.
  • 626 Satin Chrome Finish: The 626 finish delivers a clean, professional aesthetic that coordinates with a broad range of commercial door hardware.
  • Rubber Angle Stop Design: Angled rubber bumper head absorbs door impact effectively, protecting both the door and surrounding surfaces from damage.
  • Complete Fastener Package Included: Ships with 2 ea. 1/4" x 1-1/2" SMS screws and 2 ea. plastic anchors for a ready-to-install experience on most floor types.
  • Commercial-Grade Application: Rated and designed for commercial use, ensuring reliable performance in offices, schools, healthcare facilities, and other demanding environments.
  • Contractor-Friendly Shelf Pack: Available in a shelf pack of 10 units, streamlining procurement and installation across multiple openings or projects.

Technical Specifications

  • Product Group: Door Trim and Accessories
  • Subcategory: Door Stops & Holders
  • Product Subgroup: Door Stops, Holders, Silencers & Bumpers
  • Product Type: Door Stops - Floor
  • Commercial/Residential: Commercial
  • Product Category: Door Trim and Accessories
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities and Schools
  • Healthcare Institutions and Medical Offices
  • Retail Establishments and Storefronts
  • Government and Municipal Buildings
  • Multi-Tenant Residential Properties
  • Industrial and Warehouse Facilities

Why Don-Jo 1480?

Don-Jo floor stop products are engineered with solid brass construction and precision finishes to deliver professional-grade reliability in commercial door hardware applications. The 1480 Rubber Angle Floor Stop combines a durable brass body, a 626 Satin Chrome finish, and a rubber impact-absorbing head to provide dependable door protection across high-traffic openings. For contractors and facility managers seeking a consistent, quality solution for multiple installations, the shelf pack of 10 makes the Don-Jo 1480 an efficient and trusted choice.

Product Specs

Product Group:
Door Trim and Accessories
Subcategory:
Door Stops & Holders
Product Subgroup:
Door Stops, Holders, Silencers & Bumpers
Product Type:
Door Stops - Floor
Commercial/Residential:
Commercial
Product Model:
1480
Product Category:
Door Trim and Accessories
Product Substrate:
Brass
Department:
Door Hardware

Don-Jo 1480-626 – Frequently Asked Questions

1) How tall is the Don-Jo 1480 floor stop, and will it catch my door?
The Don-Jo 1480 rubber angle floor stop stands 2-5/8 inches tall on a 2-1/2 by 1 inch base. That height is what matters: the angled rubber head has to meet the face of the door above the bottom rail, so measure from your finished floor to the bottom of the door. Doors with a large undercut or a thick threshold in the swing path may need a taller gooseneck style stop instead.
2) Should I use an angle floor stop or a dome stop?
An angle stop like the Don-Jo 1480 rises 2-5/8 inches and strikes the face of the door, so it takes the hit on a rubber bumper set at an angle and keeps the load off the door bottom. A dome stop sits low and flat and is meant for doors with tight floor clearance where a taller body would be a trip hazard, for example the Ives FS13 or FS17 brass floor dome stops, or the Orca 23LP low rise dome stop. If the stop lands in a walking path, go dome. If you need to stop the door well up off the floor, go angle.
3) The door needs to be held open, not just stopped. What should I use instead of a Don-Jo 1480?
The Don-Jo 1480 is a stop only - an angled rubber bumper head that arrests the door swing and protects the wall and hardware. If you need the door to stay open, look at a holder instead. The Ives FS40 / FS41 / FS42 / FS43 automatic floor stop and holder offers adjustable door-to-floor clearance, the Orca Hardware 22HD Series goose neck floor stop is catalogued with a door holder function for 1-3/8 inch or 1-3/4 inch doors, and the SOSS MDH magnetic door holder and stop measures 3-5/16 inch by 1-3/4 inch and holds the door magnetically.
4) What is the closest equivalent to the Don-Jo 1480 floor stop from another brand?
The Don-Jo 1480 is a brass rubber angle floor stop, and the nearest counterparts are the Ives FS13 and FS17 heavy-duty brass floor dome stops with rubber bumpers. All three are brass-bodied floor-mounted stops with a rubber impact surface. The difference is the head shape: the 1480 uses an angled rubber bumper head on a 2-1/2 inch by 1 inch base standing 2-5/8 inch tall, while the Ives units use a dome profile. The FS13 differs from the FS17 in that its rubber bumper is replaceable, which matters if you expect to refresh the strike surface rather than replace the whole stop.
5) The Don-Jo 1480 stands 2-5/8 inches tall and that is too high for our floor clearance. What is a lower-profile alternative?
For tight door-to-floor clearance, low-rise bumpers sit well under the 2-5/8 inch height of the Don-Jo 1480. The Deltana UFBS138 square universal floor bumper is 1-3/8 inch in solid brass, the Emtek 2254 floor door bumper is 1-3/8 inch by 1-1/4 inch, and the Orca Hardware 23LP Series is a low-rise dome floor stop with a gray tip. The Deltana UFB4505 round universal floor bumper and the Emtek 2257 cylindrical floor bumper are both 1-1/2 inch. Note that the shorter the bumper, the closer to the door bottom rail it contacts, so confirm the strike point on the door face.
6) Does the Don-Jo 1480 come with mounting screws and anchors?
Yes. Each 1480 ships with 2 of the 1/4 inch by 1-1/2 inch SMS screws and 2 plastic anchors, so it mounts to concrete or masonry floors without a separate fastener buy. For wood subfloor under carpet or tile, many installers skip the plastic anchors and drive the screws straight into the wood.
7) Is the Don-Jo 1480 solid brass or plated steel?
Solid brass body with a 626 satin chrome finish over it. Brass holds up better than plated steel where floors get mopped or where moisture collects, which is why it shows up in restrooms, locker corridors, and entry vestibules.
8) Will the 626 satin chrome on this floor stop match my existing door hardware?
626 satin chrome is the standard commercial finish on lever locks, exit devices, closers, and hinges, so the 1480 lines up with most commercial openings already specified in 626 or the closely related 652 satin chrome on steel. Satin chrome is the only finish the 1480 is offered in, so if your building is standardized on oil rubbed bronze or polished brass, pick a different stop.
9) What's the difference between the Don-Jo 1480 and a simple round floor bumper?
The 1480 is a tall angle stop, 2-5/8 inches up on a 2-1/2 by 1 inch footprint, so it intercepts the door face. A floor bumper is a short round or square puck that the door bottom edge or the door face contacts right near the floor, like the Deltana UFB4505 round universal floor bumper at 1-1/2 inch, the Deltana UFBS138 square bumper at 1-3/8 inch, or the Emtek 2257 1-1/2 inch cylindrical floor bumper. Bumpers are lower profile and less obtrusive, but they only work when the door swings to nearly touch the floor at that point.
10) Is a gooseneck door stop the same thing as the Don-Jo 1480?
No. The Don-Jo 1480 is a floor-mounted angle stop with a 2-1/2 inch by 1 inch base that anchors to the floor and takes the door edge against an angled rubber head at 2-5/8 inch. Gooseneck stops such as the Delaney Gooseneck Floor Door Stop, the Emtek 2253 Goose Style Door Stop, and the Orca 22HD Series goose neck floor stop use a tall curved arm that reaches up to meet the door higher on the face, and the Orca unit is catalogued as a door holder. Choose between them based on where on the door you want contact and whether you need hold-open.
11) We want a more decorative floor stop than the Don-Jo 1480 for a front-of-house opening. What are the options?
The Don-Jo 1480 carries a 626 satin chrome finish over brass with a plain angled rubber head sized for commercial duty. If the opening calls for something more ornamental, Deltana offers the UFBD3505 round universal floor bumper at 3-1/2 inch in a decorative solid brass version and the UFBP4505 round universal floor bumper at 1-5/8 inch with a pattern cap. Emtek's 2251 Half Dome Door Stop is another decorative-leaning profile. All are floor-mounted like the 1480.
12) Will a Sure-Loc or Delaney dome stop work in place of the Don-Jo 1480 in a school corridor?
The Don-Jo 1480 is built for commercial use in offices, schools, healthcare and similar high-traffic settings, with a solid brass body and a rubber angle head. The Sure-Loc DS-FL2 cylindrical floor stop is described for residential doors, and the Sure-Loc DS-FL1 and the Delaney Dome Door Stop are general floor stop designs. For corridor traffic, the closer matches on duty level are the Ives FS13 and FS17, both heavy-duty brass floor dome stops.
13) Is there a tamper-resistant alternative to the Don-Jo 1480 for a detention or behavioral health opening?
The Don-Jo 1480 is a standard commercial floor stop anchored with two 1/4 inch by 1-1/2 inch SMS screws and plastic anchors, which is appropriate for general commercial openings but not a security product. Where tampering is a concern, the Ives FS18S/FS18L security floor stop is the heavy-duty option in the same floor-mounted category.
14) Can I buy the Don-Jo 1480 in bulk for a multi-door job?
Yes, the 1480 is packed in a shelf pack of 10, which is how most contractors and facility managers buy it when they're outfitting a run of openings on one order rather than piecing it together stop by stop.
15) Does the Don-Jo 1480 need a specific handing or door thickness?
Neither. A floor stop mounts to the floor in the door's swing path, so there is no handing and no door thickness to match. What you do need to confirm is floor material for the anchors and the distance from the hinge side out to where the door will be stopped, since that sets where the 2-5/8 inch tall body lands.
How fast can I get the Don-Jo 1480-626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo 1480-626 come with a warranty?
Absolutely. The Don-Jo 1480-626 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo 1480-626?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo 1480-626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!