Don-Jo ALP-206 Angle Latch Pro...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$21.40
$20.40
Don-Jo ALP-206 Angle Latch Protector, 1-1/2" x 6" Steel, Silver Coated finish, outswing door application, 4-hole mount

Don-Jo ALP-206 Angle Latch Protector for Outswing Doors, 1-1/2" x 6" Steel

(No reviews yet) Write a Review

Model: ALP-206-SL
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$21.40
$20.40
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo ALP-206 Angle Latch Protector for Outswing Doors, 1-1/2" x 6" Steel

The Don-Jo ALP-206 is a commercial-grade angle-type latch protector for outswing doors. It measures 1-1/2" wide by 6" in length and is constructed from 10-gauge (.134) steel. The protector mortises directly into the edge of the door for a flush installation that resists tampering and forced entry. Available in BC, DU, and SL finishes.

Key Features

  • Dimensions: 1-1/2" wide x 6" length for standard commercial door latch coverage on outswing doors.
  • 10-Gauge Steel Construction: 10-gauge (.134) steel provides structural strength for high-traffic commercial applications.
  • Angle-Type Mortise Design: Mortises into the door edge for a flush, professional fit that minimizes protrusion.
  • Outswing Door Compatibility: Configured for outswing door applications, ensuring correct alignment with the latch bolt.
  • Finish Options: Available in BC (Bright Brass), DU (Duronodic Brown Coated), and SL (Silver Coated) to coordinate with existing hardware.

Typical Applications

  • Commercial office buildings
  • Educational facilities
  • Healthcare institutions
  • Retail establishments
  • Industrial and warehouse facilities
  • Multi-tenant residential properties
  • Government and municipal buildings

Manufacturer Resources

DON-JO Latch Protectors

Product Specs

Subcategory:
Latches & Catches
Product Group:
Parts and Accessories
Product Subgroup:
Parts and Accessories
Product Type:
Latch Protector
Commercial/Residential:
Commercial
Door Swing:
Out Swing
Product Model:
ALP 206
Product Category:
Door Trim and Accessories
Product Substrate:
Steel
Department:
Door Hardware

Don-Jo ALP-206-SL – Frequently Asked Questions

1) Will a Don-Jo ALP-206 latch protector work on an inswing door?
No. The ALP-206 is an angle-type protector built for out-swing doors, where the latch edge and the strike gap are exposed on the outside of the opening. On an inswing door the latch is already shielded by the frame stop, so an angle protector has nothing to cover and the wrong geometry to mount. For an inswing opening you want a flat latch protector that mounts on the frame side instead.
2) How does the Don-Jo ALP-206 mount, and does the door have to be prepped?
The ALP-206 mortises directly into the edge of the door, so yes, the door edge gets cut. It is not a surface-applied plate you can just screw over an existing face. Plan on routing the edge to seat the angle flush, which is what keeps the protector from being pried and keeps it from adding thickness at the strike gap. That prep work is why this one is usually installed by a carpenter or locksmith rather than dropped on during a quick fixture swap.
3) Do I need an angle latch protector or a flat one for my door?
It comes down to swing. An angle protector like the ALP-206 wraps the exposed latch edge of an out-swing door, which is where an intruder can get a bar into the gap. A flat protector is the frame-side plate used where the latch is not exposed on the pull side. Stand outside the door: if it opens toward you and you can see the latch bolt in the gap, you want the angle type.
4) What size is the Don-Jo ALP-206 latch protector?
Measures 1-1/2 x 6 inches, in 10-gauge (.134) steel. Six inches gives you coverage above and below a standard latch, and the 1-1/2 inch dimension is what has to sit in the mortise at the door edge. If the opening has a wider gap between door and frame than the protector spans, or hardware crowding the latch within that six inch run, check the run before you cut.
5) Is 10-gauge steel heavy enough for a latch protector on a high-traffic commercial exterior door?
10-gauge (.134) steel is the commercial weight for this part, and the ALP-206 is a commercial-classified protector rather than a residential one. Heavier gauge is what resists a pry bar at the latch, which is the failure point these are installed to close. On a back-of-house or tenant exterior outswing door taking daily abuse, that gauge is the reason to spec the part.
6) What finishes does the Don-Jo ALP-206 come in, and which matches dark bronze hardware?
Three finishes: BC bright brass, DU duronodic brown coated, and SL silver coated. DU is the one to pick against dark bronze or oil-rubbed style door hardware, SL against aluminum, chrome or satin storefront trim, and BC against brass lever sets and exit trim. Because these get installed at the door edge on outswing openings, they are visible from outside, so matching matters more here than on a concealed part.
7) Will the Don-Jo ALP-206 fit over an existing exit device or lock without removing hardware?
The ALP-206 sits in the door edge, not on the face, so it does not overlay a rim exit device or a lock body on the door face. What it does do is occupy the edge at the latch, which means the latch or strike hardware in that six inch run has to clear it. Pull the strike side and check the edge for existing prep before cutting the mortise.
8) How many Don-Jo ALP-206 latch protectors come in a pack?
The ALP-206 ships in shelf packs of 10. That works out well for a property or facility standardizing several outswing exterior doors at once, and it means a single-door repair leaves you with spares on the shelf. Order in whole packs and count your openings first.
How fast can I get the Don-Jo ALP-206-SL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo ALP-206-SL come with a warranty?
Absolutely. The Don-Jo ALP-206-SL is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo ALP-206-SL?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo ALP-206-SL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!