Don-Jo DEST-102 Extended Lip D...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$31.80
$27.93
Don-Jo DEST-102 Extended Lip Dimple ASA Strike, 4-7/8" x 2", 18 Gauge Commercial Door Strike

Don-Jo DEST-102 Extended Lip Dimple ASA Strike, 4-7/8" x 2", 18 Gauge Commercial Door Strike

(No reviews yet) Write a Review

Model: DEST-102-630
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$31.80
$27.93
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo DEST-102 Extended Lip Dimple ASA Strike — 4-7/8" x 2" Commercial Door Strike

The Don-Jo DEST-102 is a commercial-grade Extended Lip Dimple ASA Strike engineered for reliable latching performance in demanding door hardware applications. Measuring 4-7/8" in height with a 2" width measured from the center of the screw hole to the end of the lip, this strike plate is constructed from 18-gauge (.050) steel for durable, long-lasting service. Available in multiple finishes including DU, 622, and 630, the DEST-102 is designed to complement a wide range of commercial door hardware configurations.

Key Features

  • Precise Dimensions: 4-7/8" height with a 2" width measured from the center of the screw hole to the end of the extended lip for accurate, consistent installation.
  • Heavy-Duty 18-Gauge Construction: Manufactured from 18-gauge (.050) steel, providing the structural integrity required for commercial door applications.
  • Extended Lip Dimple Design: ASA-standard extended lip with dimple profile ensures proper latch engagement and smooth operation across compatible door hardware.
  • Multiple Finish Options: Available in DU, 622, and 630 finishes to coordinate with existing door hardware and architectural requirements.
  • Commercial-Grade Performance: Designed and rated for commercial applications, delivering dependable performance in high-use environments.
  • ASA Standard Compatibility: Conforms to ASA strike specifications for broad compatibility with standard latch sets and locksets.

Technical Specifications

  • Subcategory: Door Strikes
  • Product Group: Parts and Accessories
  • Product Subgroup: Door Strikes and Strike Boxes
  • Product Type: Door Strikes
  • Commercial/Residential: Commercial
  • Product Category: Parts and Accessories
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Don-Jo DEST-102?

Don-Jo door strike products are built to commercial standards, with the DEST-102 featuring 18-gauge (.050) steel construction and an ASA-compliant extended lip dimple profile that ensures reliable latch engagement in high-traffic environments. Engineered for professional door hardware installations where dimensional accuracy — 4-7/8" height and a 2" lip measurement from screw center to lip end — and finish consistency are essential to a complete, polished result.

Manufacturer Resources

DON-JO Strike Plates

Product Specs

Subcategory:
Door Strikes
Product Group:
Parts and Accessories
Product Subgroup:
Door Strikes and Strike Boxes
Product Type:
Door Strikes
Commercial/Residential:
Commercial
Product Model:
DEST 102
Door Strike:
Extended Lip Dimple ASA Strike
Product Category:
Parts and Accessories
Department:
Door Hardware

Don-Jo DEST-102-630 – Frequently Asked Questions

1) Will the Don-Jo DEST-102 strike fit a standard ASA lock prep in my frame?
Yes. The DEST-102 is an ASA-format strike measuring 4-7/8 inches in height, which is the standard ASA (T-strike) frame prep used with commercial cylindrical and mortise latch sets. If your frame is already cut for a 4-7/8 inch ASA strike, this drops into the same cutout and screw pattern.
2) What does the 2 inch measurement on the DEST-102 extended lip strike actually refer to?
The 2 inches is the lip length measured from the center of the screw hole to the end of the lip, not the overall plate width. That is how extended lip strikes are dimensioned, because the number you need is how far the lip reaches past the frame face toward the door stop. Measure from your existing screw centerline out to the lip edge to confirm you need a 2 inch lip.
3) What is the dimple on the DEST-102 strike for?
The dimple is a small raised depression in the strike face that catches the deadlatch plunger on a cylindrical lockset. It keeps the plunger from dropping into the strike opening, so the latch stays deadlocked against being carded or shimmed. If you are using a lockset with a deadlatch plunger, a dimple strike is what you want; a plain flat ASA strike defeats that feature.
4) Will a Don-Jo DEST-102 strike work on a pair of doors with no mullion?
No. The DEST-102 is a frame-mounted ASA strike for a single door latching into a jamb. On a double door with no mullion the inactive leaf carries the strike, and you need a strike kit made for that condition, such as the Detex 92 Strike Kit for double doors with tamper resistant fasteners.
5) Will a Detex 92 strike kit work in place of a Don-Jo DEST-102 ASA strike?
No, they solve different problems. The Don-Jo DEST-102 is an extended lip dimple ASA strike, 4-7/8 inches high with a 2 inch lip measured from the center of the screw hole to the end of the lip, in 18-gauge (.050) steel, and it mortises into the frame to receive a standard latch. The Detex 92 Strike Kit is a double door strike kit from the 90 Strike Series supplied with tamper resistant fasteners, intended for the double door application it is built around rather than as a single-frame ASA replacement. If the existing prep in the frame is the standard 4-7/8 x 1-1/4 ASA cutout and you need more lip reach, the DEST-102 is the part; if you are strike-ing a pair of doors, the Detex kit is the one being asked for.
6) What strike should I use if the latch has to catch on a round post instead of a door frame?
The Don-Jo DEST-102 is a flat ASA strike with an extended dimpled lip, sized 4-7/8 inches high with a 2 inch lip from screw hole center to lip end, and it wants a flat frame face to sit against. For a round post or pipe, the Trimco 1260P from the 1260 Series is a pipe adapter strike, supplied as the strike only, and is the shape built for that condition. Use the DEST-102 on a conventional flat commercial frame where you need extra lip to reach the latch, and the Trimco pipe adapter where the strike side is tubular.
7) When do I need an extended lip strike instead of a standard lip strike?
You need the extra lip when the frame is set back from the door face, when there is heavy trim, brick mould or a deep reveal, or when the latch would otherwise ride against the frame edge and chew up the jamb. The extended lip on the DEST-102 carries the latch across that gap so it slides onto the strike cleanly. If the frame face is flush with the door edge, a standard lip strike is the right call and the extended lip will just stick out.
8) Is the Don-Jo DEST-102 heavy enough for a high traffic commercial door?
It is made from 18-gauge (.050) steel and is classed as a commercial product, which is the gauge normally used for commercial frame strikes in offices, schools, healthcare and multi-tenant buildings. For an entrance or stairwell door that cycles all day, the 18-gauge plate is the right build; for a light interior residential door you would be over-specifying.
9) What finishes does the Don-Jo DEST-102 strike come in, and which matches my existing hardware?
Three: 622 matte black, 630 satin stainless steel, and DU duronodic brown coated. 630 is the usual match for commercial levers and exit devices in satin stainless; 622 suits black-finish hardware; DU matches dark bronze anodized aluminum storefront and entrance systems.
10) Can I standardize on one strike across a whole building with the DEST-102?
If the openings are already prepped for 4-7/8 inch ASA strikes and the locksets are deadlatching cylindrical types, yes, one model covers them. Pick the finish per wing or per entrance from the three available (622, 630, DU). The one thing that varies opening to opening is lip length, so confirm the 2 inch screw-center-to-lip-end dimension works on every frame reveal before you buy in quantity.
11) I need a strike for a round post or pipe jamb, not a flat frame. Is this the right part?
No. The DEST-102 is a flat ASA plate meant to sit against a flat frame face, so it will not seat on a round post. For that you want a pipe adapter strike, such as the Trimco 1260P, which is built to take a strike onto pipe.
12) If I need tamper resistant fasteners at the strike, is the Don-Jo DEST-102 the right choice?
The Don-Jo DEST-102 is supplied as an extended lip dimple ASA strike in 18-gauge (.050) steel, finished in DU Duronodic brown coated, 622 matte black, or 630 satin stainless steel, and mounts with conventional strike screws. Where security fasteners are part of the requirement, the Detex 92 Strike Kit is packaged with tamper resistant fasteners as part of the kit. For a standard commercial frame repair or lip extension on a single door, the DEST-102 covers it; specify the Detex kit when the fastener type itself is the spec being written.
13) I am ordering a strike for a pair of doors in a school corridor. Is the Don-Jo DEST-102 what I want?
For each single opening with a standard ASA frame prep, the Don-Jo DEST-102 is a commercial extended lip dimple ASA strike measuring 4-7/8 inches high with a 2 inch lip from the center of the screw hole to the lip end, in 18-gauge (.050) steel, and it suits commercial office, educational, healthcare, retail and government work. A pair of doors with no fixed frame member between them is a different condition, and the Detex 92 Strike Kit from the 90 Strike Series is specified as a double door strike kit for exactly that. Confirm whether the latch strikes a frame jamb or the inactive leaf before choosing.
14) Does the Don-Jo DEST-102 come with a strike box or dust box?
The DEST-102 is the strike plate itself. If your frame cavity is open behind the cutout and you want the latch shielded, order a separate strike box sized to the ASA opening along with it.
15) Does the Trimco 1260P come with the mounting hardware the way a strike kit does?
The Trimco 1260P from the 1260 Series is catalogued as a pipe adapter strike supplied as the strike only. By contrast the Detex 92 Strike Kit is sold as a kit for double doors with tamper resistant fasteners included. The Don-Jo DEST-102 itself is the strike plate in 18-gauge (.050) steel, 4-7/8 inches high with a 2 inch extended dimpled lip, ordered in DU, 622 or 630 finish, so plan fasteners and any strike box accordingly when you are matching an existing frame prep.
How fast can I get the Don-Jo DEST-102-630 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo DEST-102-630 come with a warranty?
Absolutely. The Don-Jo DEST-102-630 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo DEST-102-630?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo DEST-102-630 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!