Don-Jo ETS-175 Extended Lip T ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$21.08
Don-Jo ETS-175 Extended Lip T Strike, 2-3/4" x 1-3/4" Non-Ferrous

Don-Jo ETS-175 Extended Lip T Strike, 2-3/4" x 1-3/4" Non-Ferrous

(No reviews yet) Write a Review

Model: ETS-175-630
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$21.08
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo ETS-175 Extended Lip T Strike — 2-3/4" x 1-3/4" Non-Ferrous Door Strike

The Don-Jo ETS-175 is a commercial-grade Extended Lip T Strike crafted from non-ferrous material, delivering reliable latching performance for a wide range of door applications. Measuring 2-3/4" in height and 1-3/4" in width (measured from the center of the screw hole to the end of the lip), this 18-gauge (.050) strike provides a precise, durable fit for single-latch door assemblies. Available in multiple finishes — 605, 609, 622, and 630 DU — the ETS-175 is engineered to complement a variety of door hardware configurations in commercial settings.

Key Features

  • Precise Dimensions: Measures 2-3/4" in height and 1-3/4" in width, with width measured from the center of the screw hole to the end of the lip for accurate installation alignment.
  • Non-Ferrous Material Construction: Built from 18-gauge (.050) non-ferrous material for corrosion resistance and long-lasting durability in commercial door applications.
  • Extended Lip T Strike Design: The extended lip profile provides enhanced latch engagement and improved door security over standard lip strikes.
  • Single Latch Hole Configuration: Features 1 latch hole, making it suitable for standard single-latch door hardware setups.
  • Multiple Finish Options: Available in finishes 605, 609, 622, and 630 DU to coordinate with existing door hardware and architectural aesthetics.
  • Commercial-Grade Quality: Designed and rated for commercial use, suitable for demanding high-traffic door hardware installations.
  • Convenient Shelf Pack Quantity: Sold in a shelf pack of 10, ideal for contractors, facility managers, and distributors stocking replacement or new-installation strikes.

Technical Specifications

  • Subcategory: Door Strikes
  • Product Group: Parts and Accessories
  • Product Subgroup: Door Strikes and Strike Boxes
  • Product Type: Door Strikes
  • Commercial/Residential: Commercial
  • Product Category: Parts and Accessories
  • Product Substrate: Non-Ferrous
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings
  • Industrial and Warehouse Facilities

Why Don-Jo ETS-175?

Don-Jo door strike products are engineered to meet the demands of commercial door hardware applications, combining 18-gauge (.050) non-ferrous construction with a precisely dimensioned extended lip profile for reliable latch engagement. The ETS-175 is a trusted replacement and new-installation solution for professionals who require consistent performance and finish versatility across a broad range of commercial environments.

Manufacturer Resources

DON-JO Strike Plates

Product Specs

Subcategory:
Door Strikes
Product Group:
Parts and Accessories
Product Subgroup:
Door Strikes and Strike Boxes
Product Type:
Door Strikes
Commercial/Residential:
Commercial
Product Model:
ETS 175
Door Strike:
Extended Lip T Strike
Product Category:
Parts and Accessories
Product Substrate:
Non-Ferrous
Department:
Door Hardware

Don-Jo ETS-175-630 – Frequently Asked Questions

1) What size is the Don-Jo ETS-175 extended lip strike?
The ETS-175 measures 2-3/4 inches in height by 1-3/4 inches in width, with that width taken from the center of the screw hole out to the end of the lip. That center-to-lip measurement is the one that matters when you are checking clearance against the door stop, because it tells you how far the lip runs past the screw line toward the door.
2) Why would I use an extended lip strike instead of a standard T strike?
An extended lip carries the lip further out past the frame so the latch rides up onto it cleanly instead of catching the jamb edge. That is what you want where the frame is set back from the door face, where a wood jamb is getting chewed up by the latch, or where trim or a gasket stands the door off. On a flush frame with the latch already lining up, a standard lip length is enough. The ETS-175 is the extended lip version, with the lip running 1-3/4 inches from the screw hole center.
3) Will the ETS-175 work with a deadbolt as well as the latch?
No. The ETS-175 has a single latch hole, so it takes one bolt only, the latchbolt from a knob, lever, or passage set. If the opening has a separate deadbolt above the lockset you need a second strike for it, or a T strike with two openings.
4) Is the Don-Jo ETS-175 the right strike for a pair of doors with an exit device, or do I need a different part?
The ETS-175 is an extended lip T strike with a single latch hole, made for a single latch engaging a frame or jamb. A double door opening is a different job: the Detex 92 Strike Kit is built for double door applications and comes with tamper resistant fasteners, which is what you want where the strike is exposed on a pair. Use the ETS-175 where one latch is landing in a prepped jamb and the extended lip is needed to carry the latch across the gap; go to the Detex 92 kit when the strike has to serve a double door.
5) My latch is engaging a round post rather than a flat jamb. Will an extended lip T strike work there?
No. The ETS-175 is a flat extended lip T strike sized 2-3/4 inch high by 1-3/4 inch wide, with the width measured from the center of the screw hole to the end of the lip, and it is meant to mount to a flat frame face. For a latch landing on a pipe or round post, the Trimco 1260P is a pipe adapter strike, sold as the strike only, and that is the part that addresses a round surface. The two are not interchangeable even though both are strikes.
6) Is a non-ferrous door strike worth it for exterior or humid openings?
That is exactly the case for it. The ETS-175 is made from non-ferrous material, so it will not rust the way a plated steel strike does when water sits in the frame pocket. Worth specifying on exterior entrances, pool and locker rooms, kitchens, and coastal buildings. The stock is 18-gauge (.050).
7) What finishes does the Don-Jo ETS-175 T strike come in?
Five: 605 polished brass, 609 antique brass, 622 matte black, 630 satin stainless steel, and DU duronodic brown coated. For a building already standardized on 626 satin chrome lever sets, 630 is the closest visual match on the frame side and is the usual pick for commercial work. Matte black 622 and duronodic DU are the ones to reach for when the existing hardware is dark bronze or black.
8) Can I use one strike for a pair of doors with no mullion?
No. The ETS-175 is a single-latch strike that mounts in the jamb of one leaf. For a double door you are into a different part entirely, such as the Detex 92 Strike Kit, which is a double door strike kit supplied with tamper resistant fasteners.
9) I am standardizing strikes across a building and want one part that covers both the single doors and the exterior pairs. Can the ETS-175 do both?
Plan on two parts. The ETS-175 covers the single-latch openings and is 18-gauge non-ferrous, which is the material choice where corrosion resistance matters, and it comes in 605 polished brass, 609 antique brass, 622 matte black, 630 satin stainless steel, and duronodic brown coated so it can be matched to the trim already on the doors. For the pairs, the Detex 92 Strike Kit is the double door part and includes tamper resistant fasteners, which is the usual requirement on exterior pairs. Specify the ETS-175 for the singles and the Detex 92 kit for the pairs rather than trying to force one strike onto both conditions.
10) How many Don-Jo ETS-175 strikes come in a pack?
They ship in a shelf pack of 10. That suits a property manager or GC redoing a run of openings, or a locksmith keeping strikes on the truck, but it means a single-door repair leaves you with nine spares.
11) Is the ETS-175 heavy enough for a high traffic commercial door?
It is a commercial-rated strike, 18-gauge (.050) non-ferrous stock, and Don-Jo lists it for office buildings, schools, healthcare, retail, multi-tenant residential, government, and warehouse work. For an opening where vandalism or pry attack is the concern rather than traffic, the fastener is the weak point, not the strike plate, and a tamper resistant kit like the Detex 92 addresses that side of it.
How fast can I get the Don-Jo ETS-175-630 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo ETS-175-630 come with a warranty?
Absolutely. The Don-Jo ETS-175-630 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo ETS-175-630?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo ETS-175-630 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!