Don-Jo LP-211-EBF Latch Protec...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$23.86
$20.95
Don-Jo LP-211-EBF Latch Protector for Outswing Doors, 3" x 11", 12 Gauge Steel with EBF Fasteners

Don-Jo LP-211-EBF Latch Protector for Outswing Doors, 3" x 11", 12 Gauge Steel with EBF Fasteners

(No reviews yet) Write a Review

Model: LP-211-EBF-PC
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$23.86
$20.95
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo LP-211-EBF Latch Protector for Outswing Doors, 3" x 11", 12 Gauge Steel with EBF Fasteners

The Don-Jo LP-211-EBF is a commercial-grade latch protector engineered specifically for outswing doors, providing a critical layer of security against forced entry and latch manipulation. Measuring 3" wide by 11" long and constructed from 12 gauge (.104) steel, this latch protector is built to withstand demanding commercial environments. Supplied with EBF (Expanding Bolt Fasteners) special fasteners, the LP-211-EBF is compatible with key-in-knob locks, lever sets, and most standard lock types, making it a versatile solution for a wide range of door hardware configurations.

Key Features

  • Outswing Door Design: Specifically engineered for out-swing door applications, providing targeted latch protection where it is most needed on exposed door edges.
  • Dimensions — 3" x 11": Generous 3" width and 11" length ensure broad coverage of the latch and strike area for maximum security.
  • Heavy-Gauge Construction: Fabricated from 12 gauge (.104) steel for exceptional rigidity and resistance to forced-entry attempts in commercial settings.
  • EBF Special Fasteners Included: Comes complete with EBF (Expanding Bolt Fasteners) that provide a secure, tamper-resistant installation on outswing door frames.
  • Broad Lock Compatibility: Works with key-in-knob locks, lever sets, and most standard lock types, allowing flexible use across a variety of door hardware configurations.
  • Multiple Finish Options: Available in BP, CP, DU, SL, and PC finishes to coordinate with existing door hardware and architectural aesthetics.
  • Convenient Shelf Pack Quantity: Sold in shelf packs of 10, making this an efficient choice for contractors, facilities managers, and distributors stocking multiple units.

Certifications & Compliance

  • Commercial-Grade Product
  • Designed for Outswing Door Applications

Technical Specifications

  • Subcategory: Latches & Catches
  • Product Group: Parts and Accessories
  • Product Subgroup: Parts and Accessories
  • Product Type: Latch Protectors
  • Commercial/Residential: Commercial
  • Product Category: Parts and Accessories
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Retail Establishments
  • Educational Facilities
  • Healthcare Institutions
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Don-Jo LP-211-EBF?

Don-Jo latch protectors are purpose-built for commercial door security, combining heavy 12 gauge (.104) steel construction with purpose-designed EBF fasteners to deliver a reliable, tamper-resistant installation on outswing doors. The LP-211-EBF's broad compatibility with key-in-knob locks, levers, and most lock types makes it an indispensable component for facilities requiring consistent, professional-grade latch protection across multiple door openings.

Manufacturer Resources

DON-JO Latch Protectors

Product Specs

Subcategory:
Latches & Catches
Product Group:
Parts and Accessories
Product Subgroup:
Parts and Accessories
Product Type:
Latch Protectors
Commercial/Residential:
Commercial
Door Swing:
Out Swing
Product Model:
LP 211 EBF
Product Category:
Door Trim and Accessories
Product Substrate:
Steel
Department:
Door Hardware

Don-Jo LP-211-EBF-PC – Frequently Asked Questions

1) Will a Don-Jo LP-211 latch protector work on an inswing door?
No. The LP-211-EBF is built for out-swing openings, where the latch and strike edge sit exposed on the outside of the door. On an inswing door the latch area faces inward and this plate has nothing to cover. For an inswing opening you want a wrap-style latch guard that mounts to the door face over the lock, not an outswing latch protector.
2) Does the Don-Jo LP-211-EBF fit a key-in-knob lock or does it only work with levers?
Both. The LP-211-EBF is made to suit key-in-knob locks, lever sets, and most standard lock types, so a building running a mix of knobs on older openings and levers on newer ones can use the same protector across them. That is what makes it a practical standardization part for a property manager covering a whole floor of doors.
3) What are EBF fasteners and do I need to buy screws separately for the LP-211?
EBF stands for expanding bolt fasteners, and they ship with the LP-211-EBF. They are the tamper-resistant alternative to a plain sheet metal screw: once set, they resist being backed out from the exterior side, which matters on an outswing door where the fastener heads are accessible to whoever is trying to get in. No separate hardware to order for a standard install.
4) Will a latch protector stop someone from jimmying the latch on my back exterior door?
That is exactly the job. On an out-swing door the latch and the gap between door and frame are reachable from outside, which is where a shim or pry attack goes. The LP-211-EBF covers that area with a 3 x 11 inch, 12 gauge steel plate held by expanding bolt fasteners that resist removal from the outside. It does not upgrade the lock itself, so if the cylinder or the strike is the weak point, address that separately.
5) How big is the Don-Jo LP-211-EBF latch protector plate?
The plate measures 3 x 11 inches and is formed from 12 gauge (.104) steel. The 11 inch run gives you coverage above and below the latch line rather than just at the strike, and the 3 inch width carries the plate past the door edge gap. Check that your opening has 11 inches of clear frame or door face at the lock height before ordering, since trim, closers, or a second lock can eat into that.
6) Is 12 gauge steel heavy enough for a latch guard on an exterior commercial door?
12 gauge at .104 thickness is the heavy end of what gets used for latch guards, and this is a commercial-rated part, not a residential one. Steel construction plus that thickness is what resists a pry bar being worked into the gap at the latch. For a rear service door, a warehouse exit, or a tenant entry that takes abuse, this is the right weight of plate.
7) What finishes does the Don-Jo LP-211-EBF come in, and which one should I use on a painted frame?
Five finishes: BP brass plated, CP chrome plated, DU duronodic brown coated, SL silver coated, and PC prime coated. PC is the one for a painted frame, it comes primed so you can finish it to match the door or frame color on site. CP reads closest to satin chrome or aluminum trim, DU matches dark bronze storefront, and BP for brass hardware.
8) Do I need to know the handing of the door to order an LP-211-EBF latch protector?
No handing to specify. The LP-211-EBF is ordered by finish only, five choices, with no left-hand or right-hand version. It mounts over the latch area on an out-swing opening regardless of which way the door is hung, which is one less thing to get wrong when you are ordering for a batch of doors you have not personally measured.
9) How many Don-Jo LP-211-EBF latch protectors come in a pack?
The LP-211-EBF is sold in shelf packs of 10. For a facility standardizing latch protection across a run of exterior openings that works out cleanly, but if you only need one or two doors covered you are still buying the ten. Worth counting your openings before you order.
How fast can I get the Don-Jo LP-211-EBF-PC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo LP-211-EBF-PC come with a warranty?
Absolutely. The Don-Jo LP-211-EBF-PC is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo LP-211-EBF-PC?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo LP-211-EBF-PC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!