Don-Jo MAF-261 Electric Strike...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$18.50
$13.14
Don-Jo MAF-261 electric strike filler plate in silver coated finish, 4-7/8" x 1-1/4", 13-gauge steel, front and side view

Don-Jo MAF-261 Electric Strike Filler Plate 4-7/8" x 1-1/4" in 13-Gauge Steel

(1 review) Write a Review

Model: MAF-261-SL
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$18.50
$13.14
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo MAF-261 Electric Strike Filler Plate 4-7/8" x 1-1/4" in 13-Gauge Steel

The Don-Jo MAF-261 is a commercial-grade steel filler plate that covers the void left in a door frame when an electric strike is removed or replaced. At 4-7/8" x 1-1/4" and fabricated from 13-gauge (.095) steel, it drops into standard electric strike cutouts and sits flush for a clean, finished result. Sold in a shelf pack of 10, it is a practical stocking item for locksmiths, access control contractors, and facility maintenance teams.

Key Features

  • Dimensions: 4-7/8" length x 1-1/4" width, sized for standard electric strike cutouts.
  • 13-Gauge (.095) Steel Construction: Resists deformation in high-traffic commercial door frames.
  • Commercial-Grade Rating: Rated for commercial use across a wide range of access control installations.
  • Pack of 10: Shelf-pack quantity supports contractors and distributors managing multiple jobs.
  • Available Finishes: Duronodic Brown Coated (MAF-261-DU) and Silver Coated (MAF-261-SL).

Technical Specifications

  • Model: MAF-261
  • Length: 4-7/8"
  • Width: 1-1/4"
  • Gauge: 13-gauge (.095)
  • Material: Steel
  • Pack Quantity: 10
  • Application: Commercial
  • Finishes: Duronodic Brown Coated, Silver Coated

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Product Specs

Subcategory:
Electric Strike Parts and Accessories
Product Group:
Electronic Access Controls
Product Subgroup:
Electric Strikes Parts and Accessories
Product Type:
Electric Strike Filler Plate
Commercial/Residential:
Commercial
Electronic:
Yes
Product Model:
MAF 261
Face Plate:
4-7/8"
Product Category:
Electronic Access Controls
Product Substrate:
Steel
Product Width:
1-1/4"
Department:
Door Hardware

Don-Jo MAF-261-SL – Frequently Asked Questions

1) What is a Don-Jo MAF-261 filler plate actually used for?
When an electric strike comes out of a frame, it leaves an open cutout. The MAF-261 is a steel cover plate that closes that void so the jamb reads as finished instead of hacked. Typical use is a door being converted back to a standard strike, or a frame prepped for access control that never got the strike installed. It is a cover, not a strike and not a lock, so it does not latch anything.
2) What size cutout will the Don-Jo MAF-261 cover?
The plate is 4-7/8 inches on the face and 1-1/4 inches wide, so it covers a strike cutout up to those dimensions. Measure the open prep in your frame first: 4-7/8 x 1-1/4 is a common electric strike faceplate footprint, but strike preps vary by manufacturer, and anything larger than the plate in either direction will still show.
3) Is the Don-Jo MAF-261 an electric strike, or does it need wiring?
No wiring, no power. Despite sitting in the access control family, the MAF-261 is a passive steel plate. It has no solenoid, no keeper, and no fail-safe or fail-secure behavior. If you need the door to release electrically, you need an actual electric strike; this part is what goes in after one is pulled out.
4) Can I use a filler plate instead of replacing the frame after removing an electric strike?
That is the point of it. Replacing or rewelding a jamb because of an oversized strike prep is a fabrication job; a 4-7/8 x 1-1/4 steel cover plate closes the opening in minutes and keeps the frame in service. Where it will not help you is if the door still has to latch into that spot, in which case you need a strike, not a filler.
5) Is 13-gauge steel heavy enough for a filler plate on a high-traffic door?
13-gauge is .095 inch steel, which is thick stock for a cover plate, heavier than the sheet metal used on decorative wrap plates. On a frame in a school corridor or a hospital wing it resists denting and kicking rather than oil-canning. Don-Jo builds the MAF-261 for commercial door hardware use.
6) What finishes does the Don-Jo MAF-261 come in?
Two coated finishes: SL silver and DU duronodic brown. Silver reads closest to aluminum and stainless frames, duronodic to dark bronze or anodized bronze jambs. Pick the one matching the frame paint or anodizing, not the lockset, since the plate sits on the jamb.
7) Do I have to buy the MAF-261 filler plate in a multi-pack?
The MAF-261 ships as a shelf pack of 10. That suits a locksmith van or a maintenance shop standardizing on one strike prep across a building, less so a one-door repair. If you only need one, you will still be taking nine spares.
How fast can I get the Don-Jo MAF-261-SL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo MAF-261-SL come with a warranty?
Absolutely. The Don-Jo MAF-261-SL is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo MAF-261-SL?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo MAF-261-SL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.

Product Reviews

  • 5
    Great Solution for Door Security!

    Posted by Edward on Sep 18th 2023

    The Don-Jo MAF-261 Electric Strike Filler Plate from zensupply.com is a real game-changer! It tidies up the door setup, but it's a tad pricey for what it does. Overall, it's a handy addition to enhance security.

!