Don-Jo OLP-2650 Latch Protecto...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$24.26
$22.29
Don-Jo OLP-2650 Latch Protector for Center Hung Outswing Aluminum Doors, 2-5/8" x 6-1/2" Steel

Don-Jo OLP-2650 Latch Protector for Center Hung Outswing Aluminum Doors, 2-5/8" x 6-1/2" Steel

(1 review) Write a Review

Model: OLP-2650-SL
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$24.26
$22.29
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo OLP-2650 Latch Protector for Center Hung Outswing Aluminum Doors — 2-5/8" x 6-1/2" Steel

The Don-Jo OLP-2650 is a commercial-grade latch protector engineered specifically for center hung outswing aluminum doors. Constructed from durable steel and measuring 2-5/8" x 6-1/2", this latch protector provides reliable defense against unauthorized latch manipulation and forced entry on outswing door configurations. Designed for commercial applications where security and long-term performance are essential requirements.

Key Features

  • Precise Dimensions: Measures 2-5/8" x 6-1/2", sized specifically to provide full latch coverage on center hung outswing aluminum doors.
  • Steel Construction: Fabricated from durable steel material for long-lasting resistance to forced entry attempts and everyday wear in commercial environments.
  • Center Hung Outswing Compatibility: Engineered specifically for center hung outswing aluminum door configurations, ensuring proper fit and reliable latch protection.
  • Commercial-Grade Performance: Rated for commercial use, making it suitable for high-traffic facilities where consistent security performance is required.
  • Latch Security: Shields the latch bolt from tampering and prying, reinforcing door security without interfering with normal door operation.
  • Door Trim Integration: Classified within the Door Trim and Latch Protection product family, designed to complement existing commercial door hardware systems.

Technical Specifications

  • Product Group: Door Trim and Accessories
  • Product Subgroup: Door Trim and Latch Protection
  • Product Type: Latch Protectors
  • Subcategory: Latches & Catches
  • Commercial/Residential: Commercial
  • Door Swing: Out Swing
  • Product Category: Door Trim and Accessories
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings with Aluminum Storefront Doors
  • Educational Facilities and School Entrances
  • Healthcare Institutions and Medical Office Buildings
  • Retail Establishments with Outswing Entry Doors
  • Industrial and Warehouse Facilities
  • Government and Municipal Buildings
  • Multi-Tenant Commercial Properties

Why Don-Jo OLP-2650?

Don-Jo latch protector products deliver professional-grade security with steel construction purpose-built for commercial outswing door applications. The OLP-2650 is specifically designed for center hung aluminum door configurations, ensuring a precise fit and dependable latch protection where it matters most. Engineered for demanding commercial environments where consistent security performance and durability are non-negotiable.

Manufacturer Resources

DON-JO Latch Protectors

Product Specs

Product Group:
Door Trim and Accessories
Product Subgroup:
Door Trim and Latch Protection
Product Type:
Latch Protectors
Subcategory:
Latches & Catches
Commercial/Residential:
Commercial
Hang Type:
Center Hung
Door Swing:
Out Swing
Product Model:
OLP 2650
Product Category:
Door Trim and Accessories
Product Substrate:
Steel
Department:
Door Hardware

Don-Jo OLP-2650-SL – Frequently Asked Questions

1) Will the Don-Jo OLP-2650 latch protector work on an inswing door?
No. The OLP-2650 is built for out swing openings, and specifically center hung ones. On an inswing door the latch and strike sit on the interior side, so an outswing latch guard has nothing to cover and will not mount correctly. If your door pulls toward you from the outside, you need an outswing guard like this one; if it pushes away, look for an inswing latch protector instead.
2) What is the difference between a center hung and offset pivot latch guard, and which one do I need?
Hanging style changes where the latch sits relative to the door edge, and the guard has to match. The Don-Jo OLP-2650 is made for center hung outswing aluminum doors, where the pivot runs through the middle of the door thickness. If your storefront door runs on offset pivots or butt hinges, the guard geometry is different and this one is the wrong part. Check the pivot at the top of the door before ordering: pivot centered in the door thickness means center hung.
3) What is the cross-brand equivalent to the Don-Jo OLP-2650 latch protector?
The closest cross-brand counterpart is the Trimco PG8000 Series panic and latch guards, which covers the same job of shielding the latch area on commercial doors. The difference is scope: the Trimco PG8000 is a series spanning panic guards and latch guards, while the Don-Jo OLP-2650 is a single steel latch protector sized 2-5/8 inches by 6-1/2 inches for center hung outswing aluminum doors. If the opening is a center hung outswing aluminum door and the hardware is a latch rather than an exit device, the OLP-2650 is the direct fit; if the door carries a panic device, look to the panic guard side of the PG8000 Series instead.
4) How big is the Don-Jo OLP-2650 latch guard?
The OLP-2650 measures 2-5/8 x 6-1/2 inches. That footprint is sized to cover the latch area on a narrow aluminum stile without running into the glass stop or the pivot hardware, which is why it works on storefront doors where a full-length wrap guard will not fit.
5) What finishes does the Don-Jo OLP-2650 come in?
Two: DU duranodic brown coated and SL silver coated. Those are the two standard storefront colors, so on most aluminum entrances one of them will match the existing door and frame finish. Pick by what the door already is, dark bronze anodized doors take the duranodic, clear anodized or mill finish doors take the silver.
6) Is the Don-Jo OLP-2650 latch protector strong enough for a high traffic commercial entrance?
It is steel and rated commercial rather than residential, which is what you want on a storefront entry that cycles all day. Steel resists prying at the latch far better than an aluminum or plastic cover, and it is the reason this guard holds up on school, retail, and medical office entrances.
7) What does a latch guard on an outswing door actually stop?
On an outswing door the latch bolt and the gap between door and frame face the outside, so an intruder can get a pry bar or a shim onto the bolt. The OLP-2650 covers that gap with a steel plate so the bolt cannot be jimmied or spread away from the strike. It mounts over the latch area and does not change how the door latches or operates day to day, so nothing about the closer or exit device needs to be reworked.
8) What else could I use instead of the Don-Jo OLP-2650 to protect a latch or panic device?
Trimco's PG8000 Series panic and latch guards are the other line we carry for this job. The Don-Jo OLP-2650 is the narrow 2-5/8 x 6-1/2 inch steel plate for center hung outswing aluminum doors specifically. If your opening is a hollow metal door with a rim exit device, or the pivot type does not match, the PG8000 Series is the range to look at instead.
9) We are standardizing latch guards across a portfolio of storefront entrances. Do we have to run one brand throughout?
No, but match by opening type rather than by brand. The Don-Jo OLP-2650 is a commercial steel latch protector dimensioned for center hung outswing aluminum doors, so it fits the storefront entrances hung that way. Openings in the same portfolio that carry exit devices or a different hanging arrangement can be picked up by the Trimco PG8000 Series, which spans panic guards and latch guards. Both are surface-applied guards over the latch area, so a mixed specification still reads consistently to the field crew as long as each door gets the guard built for its configuration.
10) Can I standardize the same latch guard across all the aluminum entrances in my building?
Only where the doors are center hung and outswing. The OLP-2650 fits that configuration, so a building whose storefront entries are all the same hanging style can run one part number across every opening and one finish, duranodic brown or silver, to match. Mixed buildings usually are not uniform though, so walk the openings first, interior offset pivot or hinged doors will need a different guard.
How fast can I get the Don-Jo OLP-2650-SL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo OLP-2650-SL come with a warranty?
Absolutely. The Don-Jo OLP-2650-SL is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo OLP-2650-SL?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo OLP-2650-SL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.

Product Reviews

  • 4
    Don-Jo Offset Latch Protectors

    Posted by Bruce Senator on Nov 14th 2024

    The quality of the steel material is excellent, providing a sufficient deterrent against damage to the door, frame, or latch. However, the duranodic coating is 'slim' at best. Arrived with too many scratches, revealing the need for a thicker coating. Additionally, regarding the lower drive rivet, there should be provided two (2) rivets, one rivet being oversized. The reason is that if the initial rivet does not bind correctly, or, the drill hole is to large, a drive rivet with greater diameter is needed. Trying to find a single, larger size drive rivet is almost impossible. THINK about the installer!

!