Don-Jo ST-214 Replacement Door...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$8.47
Don-Jo ST-214 Replacement Door Strike, 2-1/4" x 1-1/4" Non-Ferrous, 18 Gauge

Don-Jo ST-214 Replacement Door Strike, 2-1/4" x 1-1/4" Non-Ferrous, 18 Gauge

(No reviews yet) Write a Review

Model: ST-214-630
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$8.47
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo ST-214 Replacement Door Strike, 2-1/4" x 1-1/4" Non-Ferrous, 18 Gauge

The Don-Jo ST-214 is a commercial-grade replacement door strike engineered for reliable performance in demanding applications. Measuring 2-1/4" in height and 1-1/4" in width, this strike is constructed from 18-gauge (.050) non-ferrous material, offering excellent corrosion resistance and long-term durability. Featuring a single latch hole configuration, the ST-214 is a straightforward, dependable solution for replacing worn or damaged strikes on commercial doors.

Key Features

  • Precise Dimensions: Measures 2-1/4" (height) x 1-1/4" (width), providing a consistent fit for standard commercial door frame applications.
  • Non-Ferrous Construction: Built from 18-gauge (.050) non-ferrous material for superior corrosion resistance and lasting durability in varied environments.
  • Single Latch Hole Design: Features one latch hole for straightforward compatibility with standard latch bolt configurations.
  • Multiple Finish Options: Available in finishes 605, 619, 622, 630, and DU to coordinate with existing door hardware and aesthetic requirements.
  • Commercial-Grade Quality: Designed and rated for commercial applications, ensuring reliable performance in high-use environments.
  • Convenient Shelf Pack: Packaged in shelf packs of 30, making it easy to stock for maintenance, facility management, or contractor use.

Certifications & Compliance

  • Commercial Application Rated
  • Non-Ferrous (Non-Magnetic) Material Substrate

Technical Specifications

  • Subcategory: Door Strikes
  • Product Group: Parts and Accessories
  • Product Subgroup: Door Strikes and Strike Boxes
  • Product Type: Door Strikes
  • Commercial/Residential: Commercial
  • Product Category: Parts and Accessories
  • Product Substrate: Non-Ferrous
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Don-Jo ST-214?

Don-Jo door strike products deliver professional-grade reliability through quality non-ferrous, 18-gauge (.050) construction that resists corrosion and withstands the rigors of commercial use. The ST-214 is engineered for demanding environments where consistent latch engagement and long-term hardware performance are essential. With multiple finish options and convenient shelf-pack quantities, Don-Jo makes it easy for facility managers and contractors to maintain door hardware at peak performance.

Manufacturer Resources

DON-JO Strike Plates

Product Specs

Subcategory:
Door Strikes
Product Group:
Parts and Accessories
Product Subgroup:
Door Strikes and Strike Boxes
Product Type:
Door Strikes
Commercial/Residential:
Commercial
Product Model:
ST 214
Door Strike:
Replacement Strike
Product Category:
Parts and Accessories
Product Substrate:
Non-Ferrous
Department:
Door Hardware

Don-Jo ST-214-630 – Frequently Asked Questions

1) Will the Don-Jo ST-214 strike cover the cutout left by my old 2-1/4 x 1-1/4 strike?
The ST-214 is a replacement strike measuring 2-1/4 by 1-1/4 inches with a single latch hole, so it drops onto a frame already prepped for a strike of that footprint. If the frame mortise is larger than 2-1/4 x 1-1/4, the plate will not cover it and you need a bigger strike or a filler.
2) I have a pair of doors with no mullion, will the ST-214 strike work there?
No. The ST-214 is a single-latch-hole frame strike, meant for a latch entering the jamb. For a double door where the device latches into the inactive leaf, look at the Detex 92 Strike Kit for double doors, which ships with tamper resistant fasteners.
3) Will one Don-Jo ST-214 strike work for both a knob lock and a lever lock latch?
The ST-214 has a single latch hole sized for a standard cylindrical latch bolt, and cylindrical knob and lever locks use the same latch. What decides it is the frame prep and the plate size, 2-1/4 by 1-1/4 inches. A mortise lock, which throws a latch plus a deadbolt, needs a two-hole mortise strike instead.
4) Will a Detex 92 strike kit work as a replacement for a Don-Jo ST-214 strike?
No, they solve different openings. The Don-Jo ST-214 is a replacement door strike with a single latch hole, 2-1/4 inches high by 1-1/4 inches wide, in 18-gauge non-ferrous material, meant to drop into a standard commercial frame prep where a worn strike is being swapped out. The Detex 92 Strike Kit is a double door strike kit from the 90 Strike Series supplied with tamper resistant fasteners, so it is built for a pair of doors and comes as a kit rather than a single flat strike plate. If the opening is a single leaf and you are matching an existing latch cutout, the ST-214 is the part; if you are strking a double door application, the Detex 92 kit is the one to look at.
5) Is the Don-Jo ST-214 strike magnetic, and will it work near a mag lock or access control sensor?
Non-ferrous, 18-gauge (.050) material, so the plate is non-magnetic. That matters when a door position switch, magnetic contact, or other magnetically sensitive device sits near the strike, since a ferrous plate can pull a reed contact or skew a reading. It also holds up better against corrosion on exterior and washdown openings.
6) Can I buy one Don-Jo ST-214 strike or do they come in a box?
The ST-214 is packaged in shelf packs of 30. That suits a maintenance shop or a property manager standardizing strikes across a building rather than a one-door repair, though it is the same plate either way.
7) Is the Don-Jo ST-214 strong enough for a school or hospital door that gets hammered all day?
It is built for commercial use, 18-gauge (.050) non-ferrous, and Don-Jo lists it for office buildings, schools, healthcare, retail, warehouse, multi-tenant residential, and government facilities. For a high-abuse opening where the frame itself is failing behind the strike, a plate swap alone will not fix it, you want a reinforcing strike or a frame repair.
8) What is the difference between a Don-Jo ST-214 strike and a Trimco 1260P pipe adapter strike?
The Don-Jo ST-214 is a conventional flat replacement strike, 2-1/4 inches by 1-1/4 inches with one latch hole, formed from 18-gauge non-ferrous material and offered in polished brass 605, satin nickel 619, matte black 622, satin stainless 630, and duronodic brown DU. The Trimco 1260P from the 1260 Series is a pipe adapter strike, supplied as the strike only, which is a purpose-built adapter part rather than a general frame strike. For a routine strike swap on a commercial door where the frame is already prepped for a standard latch, the ST-214 is the direct-fit part; the 1260P is what you reach for when the application specifically calls for a pipe adapter strike.
9) I need strikes for a pair of doors in a school corridor, and I am standardizing hardware across the building. Can I use the same strike everywhere?
Not on every opening. The Don-Jo ST-214 is a commercial-rated replacement strike in 18-gauge non-ferrous material with a single latch hole at 2-1/4 by 1-1/4 inches, and it covers single-leaf doors throughout the building in one of five finishes so the look stays consistent. Double door openings are a separate line item: the Detex 92 Strike Kit in the 90 Strike Series is built for double doors and ships with tamper resistant fasteners, which is the relevant difference in a corridor where the hardware is exposed to student traffic. A common approach is to carry the ST-214 as the standard single-door strike and specify the double door openings separately.
10) What finishes does the Don-Jo ST-214 door strike come in?
Five: 605 polished brass, 619 satin nickel, 622 matte black, 630 satin stainless, and DU duronodic brown coated. If you are matching a fleet of commercial openings already running satin chrome-look hardware, 630 is the usual match; 622 pairs with the black lever and closer packages common on newer multi-family work.
How fast can I get the Don-Jo ST-214-630 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo ST-214-630 come with a warranty?
Absolutely. The Don-Jo ST-214-630 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo ST-214-630?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo ST-214-630 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!