Metallics P2S8 Double Ended Insert Bit Hex 1/4" #2Phil #2Slot 1-1/2" (1pc)

Yes. The P2S8 has a 1/4 inch hex body, so it drops into any standard 1/4 inch hex drive, including magnetic bit holders, nut setters and the bit sockets on cordless drivers and impact-ready holders.

One end is a #2 Phillips, the other is a #2 slotted. Flip the bit in your holder to switch between the two, which covers the bulk of panel screws, device screws and cover plate screws an electrician hits in a day without carrying two bits.

It is 1-1/2 inches overall, the standard insert bit length. That is the short format meant to seat in a bit holder or nut setter rather than chuck directly, so it keeps the stack-up short when you are working inside a panel or a box.

It ships as a single bit in a pouch, one piece per order. If you are stocking a crew or a service van shelf, order by the quantity of bits you need rather than expecting a multi-pack.

A double ended insert bit like the P2S8 gives you two tips in one piece, #2 Phillips and #2 slotted, and seats in a 1/4 inch hex holder. Pick it when you are switching between screw types constantly, as on devices and plates. A single ended power bit is the better choice when you want a longer reach bit that chucks straight into the driver, since an insert bit at 1-1/2 inches needs a holder to extend it.

Yes, #2 is the size that fits the Phillips recess on standard receptacle and switch mounting screws, panel cover screws and most 6-32 and 8-32 device hardware. The P2S8 pairs that with a #2 slotted end for the combination-head screws that are still common on older devices and plates.