You may also like
Greenlee D'VersiBIT Wood Auger Bit 1" x 54" with Screw Point
Model: GRN-16-04-54A
Greenlee D'VersiBIT Wood Auger Bit 1" x 54" with Screw PointProfessional Wood Drilling Solution for Extended Reach ApplicationsThe Greenlee D'VersiBIT Wood Auger Bit delivers reliable performance for...
Greenlee
$175.64
$125.64
D''VersiBIT System
Manufacturer Resources
Product Specs
- Application:
- For Drilling In Soft Woods Or Through Thin Sections
- Bit Diameter:
- 1.000 IN (25.400 MM)
- Color Code:
- White
- Country Of Origin:
- US
- Product Height:
- 1.250 IN
- Product Length:
- 60.000 IN
- Product Type:
- Type A
- Product Width:
- 2.500 IN
- Shaft Diameter:
- 1/4 IN (6.400 MM)
- Shaft Length:
- 54.000 IN (1371.600 MM)
- Volume:
- 187.5 CI
- Department:
- Electrical
- Product Subgroup:
- Tools & Testing
Greenlee 50380885 – Frequently Asked Questions
1) How long a drill can the Greenlee 50380885 D'VersiBIT reach through a wall?
The bit shaft on the Greenlee 50380885 runs 54 inches (1371.6 mm), so it will cross a stud bay, drop down a wall cavity, or reach over a ceiling grid without an extension. Overall product length is 60 inches. That reach is what makes it a fishing bit for running cable rather than a bench drilling bit.
2) Will the Greenlee 50380885 bit fit a standard 1/4 inch chuck or impact driver?
The shaft is 1/4 inch (6.4 mm), so it goes into any drill chuck that takes a quarter-inch shank. Note the shaft is 54 inches long, so you need swing room behind the drill to work it into a wall cavity.
3) Can I use this Greenlee D'VersiBIT on hardwood or steel studs?
No. The 50380885 is a Type A bit, specified for drilling in soft woods or through thin sections. Framing lumber, plate stock and similar soft material is what it is cut for. For hardwood or metal framing you want a different D'VersiBIT type, not this one.
4) What size hole does the Greenlee 50380885 D'VersiBIT drill?
One inch (25.4 mm). That is a common size for pulling multiple cables or a bundle through a top plate or stud when you are rough-wiring or retrofitting an existing wall.
5) How do I tell the Greenlee Type A flex bit apart from the other D'VersiBIT types on the truck?
Greenlee color codes them. The Type A, part 50380885, carries a white color code, so the soft-wood bit is identifiable at a glance in a bit roll where several lengths and types look alike.
6) Is the Greenlee 50380885 D'VersiBIT made in the USA?
Yes, country of origin on the 50380885 flex bit is the US, which matters for jobs carrying domestic-sourcing requirements on purchased tooling.
7) What exact Greenlee part number should I order for the 1 inch, 54 inch white Type A flex bit?
Order Greenlee 50380885. That is the single model covered, a Type A D'VersiBIT with a 1 inch cutting diameter, 1/4 inch shank and 54 inch shaft.
How fast can I get the Greenlee 50380885 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Greenlee 50380885 come with a warranty?
Absolutely. The Greenlee 50380885 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Greenlee 50380885?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Greenlee 50380885 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.