You may also like
DynaLock 6805 Series Handicapped Pushplates
Model 6885 Recessed Narrow, Momentary SPDT
6705 & 6805 Series Handicapped Pushplates are heavy duty egress controls
machined from solid aluminum with blue engraved handicapped symbol.
Multiple switching configurations and finishes are available. Narrow recessed
models are specifically designed for installation in aluminum store front
frames, requiring minimal cut-out/preparation. All momentary models
feature “all active” operation.
Standard finish - Satin Aluminum US28
PTD Contact Rating: 10 A @ 125VAC
All Others: 6 A @ 125VAC
Manufacturer Resources
Product Specs
- Subcategory:
- Push Buttons
- Series:
- 6805
- Product Group:
- Electronic Access Controls
- Product Subgroup:
- Sensors, Switches, Relays and Timers
- Product Type:
- Switches / Push Buttons
- Commercial/Residential:
- Commercial
- Electronic:
- Yes
- Duty Level:
- Heavy Duty
- Product Model:
- 6885
- Product Finish:
- Satin Aluminum (US28)
- Product Category:
- Electronic Access Controls
- Department:
- Door Hardware
DynaLock 6885 US26 – Frequently Asked Questions
1) Will the DynaLock 6885 pushplate fit a narrow aluminum storefront frame?
That is exactly what the narrow recessed 6885 is built for. DynaLock states the narrow recessed models are designed for installation in aluminum store front frames and need minimal cut-out and preparation, so you are not hogging out a wide pocket in a 2-inch stile to mount it.
2) What are the electrical contact ratings on the DynaLock 6885 handicap pushplate?
Momentary SPDT switching rated 6 A at 125VAC on the 6885. DynaLock rates only the PTD (pneumatic time delay) versions at 10 A @ 125VAC; all other configurations, including this one, are 6 A @ 125VAC. Size your relay, mag lock circuit or door operator input accordingly.
3) What does momentary SPDT mean for wiring a door release or automatic operator?
SPDT gives you both a normally open and a normally closed contact off one push, so the same plate can break power to a mag lock and simultaneously signal an operator or alarm shunt. Momentary means the contact transfers only while the plate is pressed and returns on release, which is the standard actuation for an ADA door operator or a timed egress release. DynaLock notes all momentary models use "all active" operation, so pressing anywhere on the plate face trips it rather than only a center target.
4) Will a momentary plate hold the door unlocked, or do I need a maintained switch?
Momentary only. The 6885 transfers its contacts while pressed and drops back the instant you let go, so on its own it will not hold a door unlocked; you need a timer or operator controller downstream to hold the release. If the job actually calls for a latch-in-place switch, look at a maintained device like the RCI 919 rotary release button or the RCI 908 electronic exit button with maintained operation.
5) What is the closest alternative to the DynaLock 6885 handicap pushplate if I need a round push plate instead of a narrow recessed one?
The RCI 950 Series round push plate carries the same handicap symbol and a momentary switch, in satin stainless steel. The DynaLock 6885 is a narrow recessed model machined from solid aluminum with a blue engraved handicapped symbol, designed for aluminum store front frames with minimal cut-out. Choose the RCI 950HP where the frame or wall accepts a round plate, and the 6885 where you are cutting into a narrow store front stile.
6) I need a narrow style door switch for an aluminum storefront stile - what are my options besides the DynaLock 6885?
The Trine 342 is a narrow style electric door switch built for the same tight stile application. The DynaLock 6885 differs in that it is a recessed narrow handicapped pushplate with a blue engraved handicapped symbol and momentary SPDT switching, machined from solid aluminum. If the opening needs the accessibility symbol on the plate, the 6885 carries it; if you only need a narrow release switch, the Trine 342 fits the same style of frame.
7) The DynaLock 6885 is momentary - what do I order if the opening needs a maintained switch?
The 6885 is a momentary SPDT pushplate, and all momentary DynaLock models feature all active operation. For maintained operation, the RCI 908 Series electronic exit button with red EXIT text is a maintained device, and the RCI 919 Series rotary release button is maintained in a satin aluminum finish. The 6885 is available in satin aluminum US28 as well if you are matching finishes across the opening.
8) What finishes does the DynaLock 6885 pushplate come in, and which one is standard?
Eight finishes: Bright Brass US3, Satin Brass US4, Light Bronze US10, Dark Bronze US10B, Medium Bronze US13, Black Satin US19, Bright Chrome US26 and Satin Aluminum US28. Satin Aluminum US28 is DynaLock's standard and the one that matches most clear-anodized storefront. The blue engraved handicap symbol is the same on every finish.
9) Is the DynaLock 6885 a surface mount or recessed plate?
Recessed. The 6885 mounts into the frame or wall rather than sitting proud on the surface, which is why it is specified for storefront stiles. If you need a plate that screws onto a finished surface with no pocket cut, the recessed 6885 is the wrong model for that opening.
10) Is this handicap pushplate heavy enough for a high-traffic commercial entrance?
It is classed heavy duty and commercial. The 6885 is machined from solid aluminum rather than stamped or molded plastic, with the handicap symbol engraved and filled blue so it does not wear off the way a screened graphic does at a hospital or school entry.
11) Is the DynaLock 6885 the right device for an emergency exit release, or should I use something else?
The 6885 is an egress control pushplate with a blue engraved handicapped symbol, intended for accessible release rather than emergency-marked release. Where the device has to read as an emergency release, the ACSI 1320-1-MOM-ER is a pushbutton switch marked Emergency Release, and the Securitron EEB is an emergency exit push button with interchangeable LED lenses.
12) What should I use instead of the DynaLock 6885 if the button needs to be illuminated?
The DynaLock 6885 is a non-illuminated solid aluminum pushplate with a blue engraved handicapped symbol and momentary SPDT switching. For an illuminated actuator, the Securitron PB4L has an illuminated halo with a stainless push button, and the Securitron PB5 is a medium round illuminated push button. Neither carries the handicapped symbol the 6885 does, so confirm the accessibility requirement for the opening first.
13) Can I standardize on the 6885 across a building and still use the same plate where a key override is needed?
The 6885 is a pushplate only, with no cylinder provision, so it covers the accessible actuator and egress release openings. Where an opening needs authorized key control instead of open push access, that is a different device, such as the ACSI 1310-1 mortise keyswitch. Specifying the 6885 in one finish across the accessible openings keeps the plates matching, since all eight finish options run the same narrow recessed plate.
14) I want key control rather than a pushplate for this door - what replaces the DynaLock 6885?
A keyswitch, not a pushplate. The ACSI 1310-1 is a mortise keyswitch, which restricts operation to a keyholder, where the DynaLock 6885 is a public-facing handicapped pushplate with a blue engraved symbol and momentary SPDT switching for anyone approaching the door. Many accessible openings use both - a keyswitch for staff and a 6885 pushplate for accessible egress.
How fast can I get the DynaLock 6885 US26 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the DynaLock 6885 US26 come with a warranty?
Absolutely. The DynaLock 6885 US26 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the DynaLock 6885 US26?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the DynaLock 6885 US26 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.