Eaton B-Line series 4Dimension strut pipe clamps and fittings, .105" height, 4.804" length, 1.25" width, Universal pipe clamp, Electro-plated zinc
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- .105 in
- Product Length Depth:
- 4.804 in
- Product Weight:
- .38 lb
- Product Width:
- 1.25 in
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Clamps
- Product Type:
- Universal pipe clamp
- Product Details:
- Universal pipe clamp
B-LINE 4D2045ZN – Frequently Asked Questions
1) What is the B-Line 4D2045ZN and what is it used for?
The 4D2045ZN is a universal pipe clamp from Eaton's B-Line 4Dimension strut clamp and fitting line. It mounts pipe or conduit to strut channel, and it's a single-piece stamped clamp measuring 4.804 x 1.25 x .105 inches with an electro-plated zinc finish. Ordered by part number 4D2045ZN.
2) Do I need anything else to install the B-Line 4D2045ZN on strut?
The 4D2045ZN is the clamp only. You supply the strut channel and the channel nut and bolt hardware that fastens the clamp to it. Size that hardware to your channel (3/8-16 channel nuts are the common commercial choice on 1-5/8 inch strut).
3) Is the electro-plated zinc finish on the 4D2045ZN pipe clamp OK for outdoor or wet locations?
Electro-plated zinc is a dry, indoor-duty finish. It suits mechanical rooms, ceiling spaces and interior conduit runs. For exterior, wet or corrosive locations, specify a hot-dip galvanized or stainless version of the clamp instead of the ZN suffix part.
4) How thick is the B-Line 4D2045ZN clamp where it seats against the strut?
The stamped material is .105 inch thick, with an overall footprint of 4.804 inches by 1.25 inches. That .105 inch thickness is what sits between the pipe and the channel lip, so allow for it when you're stacking clamps or figuring clearance under a tight ceiling.
5) How much does one B-Line 4D2045ZN clamp weigh for a takeoff?
Each clamp weighs .38 lb. On a hundred-piece hanger takeoff that's 38 pounds of hardware, which matters when you're loading a cart or adding clamp weight into a seismic support calculation.
6) Does the B-Line 4D2045ZN pipe clamp carry a UL listing or other certification?
No certification is claimed for the 4D2045ZN; the record lists certifications as not applicable. If your spec calls for a listed support assembly, verify the requirement against the strut system as a whole rather than the clamp alone.
How fast can I get the B-LINE 4D2045ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4D2045ZN come with a warranty?
Absolutely. The B-LINE 4D2045ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4D2045ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4D2045ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.