You may also like
Eaton B-Line series 4Dimension strut pipe clamps and fittings
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- .105 IN
- Product Length Depth:
- 2.541 IN
- Product Weight:
- .16 LB
- Product Width:
- 1.25 IN
- Special Features:
- Preassembled Include combination recess hex screw
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Clamps
- Product Type:
- Universal pipe clamp
- Product Details:
- Universal pipe clamp
- Product Material:
- Steel
B-LINE 4D2003PAHDG – Frequently Asked Questions
1) Does the B-Line 4D2003PAHDG pipe clamp come with the strut screw, or do I have to order hardware separately?
The 4D2003PAHDG ships preassembled with a combination recess hex screw included, so the clamp and its fastener come together. You still need the strut channel itself and, depending on your strut profile, a channel nut if your installation calls for one.
2) What is the B-Line 4Dimension 4D2003PAHDG actually used for on an electrical job?
It is a universal pipe clamp from Eaton B-Line's 4Dimension strut fittings line, used to fasten conduit or pipe to strut channel on racks, trapeze hangers and wall runs. One clamp secures one run; a recess hex screw is already assembled to it so the electrician just sets the pipe and drives the screw.
3) What material is the 4D2003PAHDG strut clamp, and can I use it outdoors?
The clamp body is steel. Steel strut clamps are fine for dry interior mechanical and electrical rooms; for exterior, rooftop or wet-location runs, specify a clamp in stainless or with a corrosion-resistant coating rated for that exposure instead.
4) Is the B-Line 4D2003PAHDG a listed or certified support product for a spec job?
No listing or certification applies to this clamp. If your submittal calls for a support with a specific UL or seismic listing, this part will not satisfy that line item and you should specify a clamp that carries it.
5) What are the dimensions and weight of the B-Line 4D2003PAHDG clamp?
It measures 2.541 in length/depth, 1.25 in width and .105 in height, and weighs .16 lb each. The .105 in figure is the material thickness of the stamped steel clamp, which is what to check if you are stacking clamps or working with tight clearance between the pipe and the strut face.
6) How do I order the exact same B-Line strut pipe clamp again for a repeat run?
Order by manufacturer part number 4D2003PAHDG from Eaton B-Line. There is one configuration of this clamp, so there is no finish or size option to specify alongside the part number. Clamps are sold and weighed individually at .16 lb each, so count one per pipe support point when you take off quantities.
How fast can I get the B-LINE 4D2003PAHDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4D2003PAHDG come with a warranty?
Absolutely. The B-LINE 4D2003PAHDG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4D2003PAHDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4D2003PAHDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.