You may also like
Eaton B-Line series 4Dimension strut pipe clamps and fittings
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- .104 IN
- Product Length Depth:
- 2.389 IN
- Product Weight:
- .15 LB
- Product Width:
- 1.25 IN
- Special Features:
- Preassembled Include combination recess hex screw
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Clamps
- Product Type:
- Universal pipe clamp
- Product Details:
- Universal pipe clamp
- Product Material:
- Steel
B-LINE 4D2009PASS4 – Frequently Asked Questions
1) Does the B-Line 4D2009PASS4 pipe clamp come with the mounting screw, or do I order that separately?
The screw is included. The 4D2009PASS4 ships preassembled with a combination recess hex screw, so it goes onto the strut without a separate fastener order. That combination head means you can drive it with either a hex driver or the matching recess bit, which helps when you are working overhead on a lift.
2) What material is the Eaton B-Line 4Dimension 4D2009PASS4 strut clamp made from?
Steel. That is the standard choice for indoor and protected mechanical or electrical runs on strut. For continuously wet, washdown, or corrosive process areas, spec a stainless or coated clamp instead.
3) What is a universal pipe clamp used for on a strut channel run?
A universal pipe clamp like the B-Line 4D2009PASS4 fastens conduit, pipe, or tube down to a strut channel so the run is held at fixed spacing along a wall, ceiling, or trapeze. It is a clamp body plus a fastener that engages the strut, not a standalone hanger, so you need strut channel already in place to use it.
4) How much clearance do I need around a 4D2009PASS4 clamp, and what does one weigh?
The clamp measures 2.389 x 1.25 x .104 inches and weighs .15 lb each. That footprint matters when you are stacking clamps close together on a single strut run or working in a tight ceiling cavity, and the low unit weight keeps a large bill of material manageable for shipping and for staging on a job.
5) Is the B-Line 4D2009PASS4 sold as a single clamp or in a multi-pack?
Ordering is by the individual clamp, model 4D2009PASS4, in the Eaton B-Line 4Dimension strut pipe clamp and fitting line. There is one configuration, so there is no finish, size, or handing choice to make on the order, just the quantity you need for your support spacing.
6) Does the 4D2009PASS4 strut clamp carry a UL listing or other certification I can put on a submittal?
The 4D2009PASS4 is catalogued with certifications marked as not applicable, so treat it as a plain mechanical support component on your submittal rather than a listed assembly. Where a project spec calls for a listed support system, carry that requirement on the strut and hanger assembly it is part of.
How fast can I get the B-LINE 4D2009PASS4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4D2009PASS4 come with a warranty?
Absolutely. The B-LINE 4D2009PASS4 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4D2009PASS4?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4D2009PASS4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.