You may also like
Eaton B-Line series 4Dimension strut pipe clamps and fittings
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- .105 IN
- Product Length Depth:
- 2.757 IN
- Product Weight:
- .17 LB
- Product Width:
- 1.25 IN
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Clamps
- Product Type:
- Universal pipe clamp
- Product Details:
- Universal pipe clamp
- Product Material:
- Steel
B-LINE 4D2010HDG – Frequently Asked Questions
1) What is the B-Line 4D2010HDG used for on a strut run?
The 4D2010HDG is a universal pipe clamp from Eaton's B-Line 4Dimension strut fitting line. It fastens pipe or conduit to a strut channel run, so the pipe is carried by the strut rather than by a separate hanger. Body is steel, and the part is ordered under MPN 4D2010HDG.
2) Is the 4D2010HDG pipe clamp galvanized for outdoor or damp locations?
The HDG suffix on the 4D2010HDG is Eaton B-Line's designation for hot dip galvanized, which is the finish specified for exterior, damp, and corrosive service on strut fittings. The base metal is steel.
3) Does the 4D2010HDG clamp come with the strut nut and bolt?
The 4D2010HDG is supplied as the clamp itself, at .17 lb per piece. Hardware to attach it to the channel, a strut nut and bolt in a matching galvanized finish, is ordered separately. Match the finish of the nut and bolt to the hot dip galvanized clamp on any outdoor run, or you will get corrosion at the fastener before the clamp shows anything.
4) Can I use one clamp size for both conduit and pipe, or do I need a size-specific clamp?
The 4D2010HDG is catalogued as a universal pipe clamp, meaning it is designed to grip across a range of pipe and conduit rather than being cut for one nominal size alone. That is what makes it useful to an electrician or a mechanical contractor standardizing one part across a building instead of stocking a bin per size. If your spec calls out a size-dedicated clamp for a specific nominal diameter, that is a different fitting family.
5) What are the dimensions and weight of the B-Line 4D2010HDG clamp?
Published figures are 2.757 in, 1.25 in, and .105 in for length/depth, width, and height respectively, at .17 lb per piece. The .105 in figure is the steel thickness, which is what matters if you are stacking the clamp under a strut nut or against another fitting. The .17 lb weight is useful for tallying support load on long runs.
How fast can I get the B-LINE 4D2010HDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4D2010HDG come with a warranty?
Absolutely. The B-LINE 4D2010HDG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4D2010HDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4D2010HDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.