You may also like
Eaton B-Line series 4Dimension strut pipe clamps and fittings
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- .104 IN
- Product Length Depth:
- 2.905 IN
- Product Weight:
- .19 LB
- Product Width:
- 1.25 IN
- Special Features:
- Preassembled Include combination recess hex screw
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Clamps
- Product Type:
- Universal pipe clamp
- Product Details:
- Universal pipe clamp
- Product Material:
- Steel
B-LINE 4D2011PASS4 – Frequently Asked Questions
1) What is the B-Line 4D2011PASS4 and what is it used for?
It's a universal pipe clamp from Eaton's B-Line 4Dimension strut clamp and fitting line. It's the piece that secures a run of pipe or conduit to strut, and it ships preassembled with a combination recess hex screw, so the fastener is already in the clamp when it reaches the job.
2) Does the 4D2011PASS4 pipe clamp come with the screw, or do I have to order hardware separately?
The screw is included. The clamp comes preassembled with a combination recess hex screw, meaning an installer can drive it with either a hex driver or a recess bit and doesn't need to pick up separate fasteners for the clamp itself. Strut, strut nuts and any anchoring hardware are separate items.
3) What material is the B-Line 4Dimension 4D2011PASS4 clamp made from?
Steel. For a contractor that matters two ways: it gives the clamp the strength to carry pipe loads off strut, and it means the clamp and its hardware should be matched to the environment, since steel supports are normally specified for dry interior or protected runs rather than direct outdoor or corrosive exposure.
4) I'm standardizing conduit supports across a facility. What exact part number do I reorder for this B-Line clamp?
Order by manufacturer part number 4D2011PASS4, Eaton B-Line series. That's the number to put on a requisition or hand to a purchasing group so every strut run in the building gets the same universal pipe clamp rather than a mix of styles that won't share hardware.
5) What size is the 4D2011PASS4 clamp, and how much does one weigh?
The clamp measures 2.905 inches (length/depth) by 1.25 inches wide, with a height of .104 inch, and weighs .19 lb each. Those numbers are worth having when you're laying out clamp spacing on a strut run or estimating the shipping weight on a bulk order for a large conduit or pipe rack job.
6) Is this an electrical conduit clamp or a plumbing pipe clamp?
It's sold as an electrical support component, and the 4Dimension line is strut based clamping for conduit and pipe runs. The clamp itself is described as a universal pipe clamp, so it isn't restricted to one trade's pipe, but the intended application is strut mounted conduit and pipe support work.
How fast can I get the B-LINE 4D2011PASS4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4D2011PASS4 come with a warranty?
Absolutely. The B-LINE 4D2011PASS4 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4D2011PASS4?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4D2011PASS4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.