You may also like
Eaton B-Line series 4Dimension strut pipe clamps and fittings
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- .104 IN
- Product Length Depth:
- 5.555 IN
- Product Weight:
- .44 LB
- Product Width:
- 1.25 IN
- Special Features:
- Preassembled Include combination recess hex screw
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Clamps
- Product Type:
- Universal pipe clamp
- Product Details:
- Universal pipe clamp
- Product Material:
- Steel
- Product Length:
- 5.555 in
B-LINE 4D2015PASS4 – Frequently Asked Questions
1) Does the B-Line 4D2015PASS4 pipe clamp come with the mounting screw, or do I have to order hardware separately?
The 4D2015PASS4 ships preassembled with a combination recess hex screw included, so the clamp and its fastener come as one piece. You still need the strut channel itself and, depending on how you are hanging it, any channel nut or spring nut your strut system uses.
2) What is a universal pipe clamp used for on strut channel?
It is the part that holds a run of pipe or conduit against strut, rather than a hanger that carries it from a rod. The 4D2015PASS4 is a universal pipe clamp from Eaton's B-Line 4Dimension strut clamp and fitting line, so it is intended to be screwed to strut and clamp the pipe in place. If you are supporting pipe from a ceiling with no strut in the run, you want a hanger or a beam clamp instead.
3) Is the B-Line 4D2015PASS4 clamp steel or plastic?
Steel. That makes it appropriate for conduit and pipe runs where a plastic clip would not hold up, and it means the clamp body will need a compatible finish or environment if the install is damp or exterior.
4) How much room does the 4D2015PASS4 clamp take up on the strut?
The clamp measures 5.555 in length/depth by 1.25 in width, with a stated height of .104 in for the material. The 1.25 in width is the figure that matters when you are spacing multiple clamps along a single piece of strut or fitting several parallel runs side by side.
5) What part number do I give my supplier for this Eaton B-Line strut pipe clamp?
Order it as B-Line 4D2015PASS4. It sits in Eaton's B-Line 4Dimension strut pipe clamp and fitting family, so quoting the 4D prefix keeps you in the right series if your distributor offers adjacent sizes.
How fast can I get the B-LINE 4D2015PASS4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4D2015PASS4 come with a warranty?
Absolutely. The B-LINE 4D2015PASS4 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4D2015PASS4?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4D2015PASS4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.