You may also like
Eaton B-Line series 4Dimension strut pipe clamps and fittings
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- .105 IN
- Product Length Depth:
- 4.401 IN
- Product Weight:
- .38 LB
- Product Width:
- 1.25 IN
- Department:
- Electrical
- Product Length:
- 4.401 in
B-LINE 4D2043ZN – Frequently Asked Questions
1) Is 4D2043ZN the correct Eaton part number to order?
Yes. 4D2043ZN is the Eaton B-Line manufacturer part number, from the 4Dimension strut pipe clamp and fitting line. Order by that number exactly; the ZN suffix denotes the zinc finish version of the fitting.
2) Will the B-Line 4D2043ZN fit standard 1-5/8 inch strut channel?
The 4D2043ZN is part of Eaton B-Line's 4Dimension strut fitting line, and its 1.25 inch width seats inside the open face of standard 1-5/8 inch strut channel rather than spanning the outside of it. Strut channel of that nominal size has an interior opening narrower than the 1-5/8 inch overall width, which is what the 1.25 inch fitting width is sized against.
3) What are the dimensions and weight of the B-Line 4D2043ZN strut fitting?
The Eaton B-Line 4D2043ZN 4Dimension strut fitting measures 4.401 x 1.25 x .105 inches and weighs .38 lb. The .105 inch figure is the material thickness of the part, so it stacks flat against a strut face without adding meaningful standoff to the run.
4) Does the B-Line 4D2043ZN carry any listing or certification for use in a rated assembly?
No certification is carried on the 4D2043ZN; the Eaton record lists certifications as not applicable for this fitting. Treat it as a general purpose strut support component. If your drawing calls for a listed seismic or fire rated support assembly, specify a part the spec names directly.
5) Is the 4D2043ZN suitable for outdoor or damp locations?
The ZN designation on this B-Line fitting is a zinc finish, which suits dry indoor electrical and mechanical runs and covered areas. For sustained outdoor exposure, washdown, or corrosive environments, step up to a hot dip galvanized or stainless version of the same 4Dimension fitting rather than the zinc.
6) What trade is the B-Line 4D2043ZN normally used by?
It is catalogued by Eaton as an electrical department item, and 4Dimension strut fittings are used by electrical and mechanical contractors to build conduit racks, pipe supports, and equipment mounting frames out of strut channel. At .38 lb it is a hand-set piece, no lifting equipment involved.
How fast can I get the B-LINE 4D2043ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4D2043ZN come with a warranty?
Absolutely. The B-LINE 4D2043ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4D2043ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4D2043ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.