You may also like
Eaton B-Line series 4Dimension strut pipe clamps and fittings
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- For Channel Type:
- For use with 4D22 and 4D21 channels
- Product Height:
- 4 IN
- Product Length Depth:
- 8 IN
- Product Weight:
- 2.95 LB
- Product Width:
- 3 IN
- Department:
- Electrical
- Product Finish:
- Hot-dipped galvanized
- Product Material:
- Steel
B-LINE 4D280FLHDG – Frequently Asked Questions
1) Which strut channel does the B-Line 4D280FLHDG fitting work with?
The 4D280FLHDG is built for Eaton B-Line 4Dimension channel, specifically the 4D22 and 4D21 profiles. It is not a fitting for standard single-slot strut, so if the channel on the job is anything other than 4D21 or 4D22, this part will not seat correctly.
2) Is the 4D280FLHDG strut fitting suitable for outdoor or wet locations?
It is hot-dipped galvanized steel, which is the finish specified for exterior, rooftop, and damp interior runs where plain or electro-plated fittings would rust. For severe chemical exposure or coastal splash zones, a stainless fitting is the usual step up.
3) How big is the B-Line 4D280FLHDG fitting and what does it weigh?
It measures 8 in length/depth, 4 in height, and 3 in width, and weighs 2.95 lb. That weight matters when you are tallying dead load on a trapeze or overhead run with a lot of fittings in it.
4) What part number do I give my distributor for this Eaton 4Dimension fitting?
Order it as Eaton B-Line 4D280FLHDG. The HDG suffix identifies the hot-dipped galvanized version, so if a drawing calls out a plain or pre-galvanized finish you want a different suffix in the 4D2 line.
5) Does the 4D280FLHDG come with the bolts and channel nuts needed to mount it?
The 4D280FLHDG is supplied as the fitting itself, in hot-dipped galvanized steel. Plan on ordering the 4Dimension channel nuts and hardware for 4D21/4D22 channel separately, and match the hardware finish to the galvanized fitting so you are not mixing coatings in an exterior run.
How fast can I get the B-LINE 4D280FLHDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4D280FLHDG come with a warranty?
Absolutely. The B-LINE 4D280FLHDG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4D280FLHDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4D280FLHDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.