You may also like
Eaton B-Line series 4Dimension strut pipe clamps and fittings
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 4 IN
- Product Length Depth:
- 6 IN
- Product Weight:
- 3.8 LB
- Product Width:
- 6 IN
- Department:
- Electrical
- Product Finish:
- DURA GREEN
- Product Material:
- Steel
B-LINE 4D280GRN – Frequently Asked Questions
1) How much space do I need to allow for the B-Line 4D280GRN fitting in my strut run?
Allow roughly a 6 x 6 x 4 inch envelope. The published dimensions are 6 inches wide, 6 inches long/deep, and 4 inches high, so it is a substantial bracket rather than a flat plate, and it needs clearance behind and around the strut face at the connection point.
2) What material and finish is the B-Line 4D280GRN strut fitting, and is it suitable for damp or corrosive areas?
The 4D280GRN is steel with a Dura-Green finish. Dura-Green is a coating applied over the steel body, so it gives more corrosion protection than plain electro-galvanized strut hardware in wash-down areas, parking structures, and similar damp indoor environments. For fully exposed marine or chemical exposure, specify stainless.
3) How much does the B-Line 4D280GRN weigh, and does that matter for my hanger load calculation?
It weighs 3.8 lb. That is dead load you add to the supported pipe or conduit weight when you size the rod, anchor, and strut span, and it matters on multi-tier trapeze runs where several fittings are stacked on the same hanger.
4) What part number do I order for the green Eaton B-Line 4Dimension strut fitting?
Order by manufacturer part number 4D280GRN, from Eaton's B-Line 4Dimension strut pipe clamp and fitting line. The GRN suffix is the Dura-Green finish version, so if your spec calls for a different finish on the same fitting, the base 4D280 number changes suffix rather than the whole designation.
5) Is the B-Line 4D280GRN a UL listed or third-party certified item?
No certification is carried on the 4D280GRN; the certification attribute reads Not Applicable. It is a mechanical strut fitting, so it is specified by material, finish, and load rather than by an electrical listing. If your submittal requires a listed support assembly, that listing typically comes from the strut channel system and its published load tables.
6) Will the 4D280GRN work for mechanical piping as well as electrical conduit support?
Yes. It is a 4Dimension strut pipe clamp and fitting, catalogued on the electrical side, but strut fittings of this type are used the same way by plumbing and HVAC trades for pipe support on the same channel systems. The deciding factor is the pipe size and strut profile at your connection, not the trade.
How fast can I get the B-LINE 4D280GRN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4D280GRN come with a warranty?
Absolutely. The B-LINE 4D280GRN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4D280GRN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4D280GRN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.