Eaton B-Line series beam clamps, 900 lb, Malleable iron, Safety factor of 5,1/2”- 13 Setscrew included, I-Beam clamp, 7/8" flange width, Electro-plated zinc
Manufacturer Resources
Product Specs
- Beam Flange Width:
- .875 in
- Certifications:
- cULus Listed
- Load Capacity:
- 900 lb
- Product Height:
- 7.25 in
- Product Length Depth:
- 2.5 in
- Product Weight:
- .95 lb
- Product Width:
- 1.25 in
- Special Features:
- Safety factor of 5,1/2”- 13 Setscrew included
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Clamps
- Product Type:
- I-Beam clamp
- Product Details:
- I-Beam clamp
- Product Material:
- Malleable iron
B-LINE B213ZN – Frequently Asked Questions
1) How much weight can the B213ZN beam clamp hold?
Rated at 900 lb load capacity, with a safety factor of 5 built into that rating. That covers typical threaded rod drops for conduit runs, cable tray, strut trapeze, and light pipe. Size the whole assembly (rod, nuts, and the supported run) to the same load, since the clamp rating is only one link in the hanger.
2) Is this beam clamp listed for electrical support work?
The B213ZN carries a cULus Listing, which is what inspectors look for on conduit and cable tray hangers in the US and Canada. It's catalogued as an electrical support item and used on I-beams for that purpose.
3) Do I need to buy a setscrew separately for this Eaton B-Line beam clamp?
No. The 1/2-13 setscrew ships with the clamp, so the only other pieces you supply are the threaded rod and hardware for whatever you're hanging.
4) Will a zinc-plated malleable iron beam clamp hold up in a damp or outdoor area?
The body is malleable iron with an electro-plated zinc finish. Electroplated zinc is a light indoor-grade coating, fine for conditioned interiors, mechanical rooms, and dry warehouse steel. For exterior runs, parking structures, or wash-down areas, step up to a hot dip galvanized or stainless version instead.
5) Can I use this clamp on a bar joist or angle instead of an I-beam?
It's built as an I-beam clamp and the .875 inch flange capacity is the governing spec. If the joist or angle leg falls within that thickness and gives the setscrew a flat bearing surface, the clamp seats. Odd-shaped members, tapered flanges, or anything thicker call for a different clamp style.
How fast can I get the B-LINE B213ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B213ZN come with a warranty?
Absolutely. The B-LINE B213ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B213ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B213ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.