B-Line BCH64GR Eaton series datacomm and low voltage support fasteners, Capacity up to 300 4-Pair UTP 25 cat 5e or 2-strand Fiber Optic Cable or 185 CAT6 or 98 CAT6A, Cable hook, Wall mount, 4" Hook, 1 J-hook, Green, Load capacity of 30 lbs, Steel

The BCH64GR 4 inch J-hook is rated for up to 185 CAT6 or 98 CAT6A cables. In 4-pair UTP Cat 5e or 2-strand fiber, capacity runs up to 300. Those are fill numbers, not weight numbers, so also check the 30 lb load rating on the hook before you size a bundle.

30 lb per hook. That is the governing limit on a run, so on heavy Cat6A bundles you will usually hit the weight before you fill the 4 inch saddle. Space your hooks so no single one is carrying more than 30 lb of cable.

It is a wall mount assembly with the bracket already attached, one J-hook per unit. You fasten it to the wall surface with anchors suited to your substrate (drywall, block, stud). It is not a beam clamp, rod, or batwing version, so if you are hanging off structure overhead rather than a vertical surface, you want a different mounting style in the B-Line cable hook family.

Yes, the BCH64GR carries a UL/CUL listing. It is a datacomm and low voltage support fastener, the type inspectors expect to see supporting communications cable rather than cable laid on ceiling grid or piping.

One J-hook per unit. If you are separating services, for example keeping copper off fiber or data off security cable, you will either need multiple BCH64GR units or a multi-hook version from the B-Line cable hook range.

Order it as Eaton B-Line BCH64GR. The BCH64 identifies the 4 inch hook and the GR suffix is the green finish, which is handy when a facility colour-codes hooks by system (data, security, AV).