B-Line BCH32BL Eaton series datacomm and low voltage support fasteners, Capacity up to 80 4-pair UTP cat 5e or 2-strand Fiber Optic Cable or 50 CAT6 or 25 CAT6A, Cable hook,Wall mount, 2" Hook, 1 hook,Equipment blue, Load capacity of 30 lbs,Steel

The BCH32BL 2 inch cable hook is rated for up to 80 4-pair UTP Cat 5e cables or 2-strand fiber optic, 50 Cat6, or 25 Cat6A. Those counts are bundle capacity for the hook saddle, and the hook also has a 30 lb load rating, so on long runs of heavy Cat6A the weight limit is what you plan around, not the cable count.

It's a wall mount hook. The BCH32BL attaches to a flat surface such as a wall, stud face, or plywood backboard. For beam flange, threaded rod, or drop wire attachment you need a hook with a matching clip or rod adapter instead.

The BCH32BL is supplied as a single hook, one per part number, with no fasteners called out. Plan on supplying your own screws or anchors suited to the substrate, wood screws into studs or plywood, toggles or masonry anchors into drywall or block.

J-hooks like the BCH32BL are the standard way to support communications cable in an accessible ceiling or wall cavity where conduit isn't required. They give a wide, 2 inch radiused saddle so the cable bundle isn't pinched, unlike cable ties or tie wire. Where the run has to be in a raceway by code or spec, or is exposed to damage, you still need conduit or a tray.

Equipment blue is a color-coding convenience, not a performance feature. Contractors running multiple systems in the same ceiling use hook color to keep pathways separated at a glance, for example blue for data and a different color for security or AV. The hook itself is steel.